similar to: Possible support for Trust 1300VA LCD Management UPS?

I recently purchased a UPS from http://www.microcenter.com/product/470131/5E_1,100W_2,200VA_6-Outlet_UPS It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS SKU: 147140 Mfr Part #: 5E2200USB-LA UPC: 743172064875 "The Eaton 5E is an essential line interactive UPS that provides cost effective and reliable power protection against power outages and bad power quality. Thanks to its small

Roman, I don't think I already asked, but could you post the output of lsusb -v -d 06da:0003 Just to be sure that we're not exceeding some buffer limitations of the device. Best regards, Arjen -- Please keep list traffic on the list

Hello Is there a way to mount a directory as readonly when using LXC with libvirt? Something like: <filesystem type="mount"> <source dir="/sw/py27/python2.7_x86_64"/> <target dir="/opt//py27"/> <readonly/> </filesystem> The documentation says

Hi - I?d like to use the CentOS-SCL python27 packages, but those appear to be rather out of date, still on 2.7.5. Is there any chance that there will be an update in the 2.7 track, to 2.7.10? thanks, Noam ----------------------------------------------------------- Noam Bernstein Center for Materials Physics and Technology Naval Research Laboratory Code 6390 noam.bernstein at

Hello All, this problem occured both before the release with CR repo and now after the release. I have 150 laptops running Centos7 / MATe, including my own laptop. We have these repo's enabled: repo id repo naam status base/7/x86_64 CentOS-7 - Base 9.591 beid-release/7 Belgian eID package archive 68 epel/x86_64 Extra Packages for Enterprise Linux 7 - x86_64 11.904 extras/7/x86_64

> Date: Friday, September 15, 2017 05:34:11 -0500 > From: Johnny Hughes <johnny at centos.org> > > On 09/15/2017 03:06 AM, johan.vermeulen7 at telenet.be wrote: >> Hello All, >> >> this problem occured both before the release with CR repo and now >> after the release. I have 150 laptops running Centos7 / MATe, >> including my own laptop. >>

I am attempting to update to 7.4 using the DVD I get these errors(truncated list) Error: Package: libgpod-0.8.3-14.el7.x86_64 (@epel) Requires: libusbmuxd.so.2()(64bit) Removing: usbmuxd-1.0.8-11.el7.x86_64 (@anaconda) libusbmuxd.so.2()(64bit) Obsoleted By: usbmuxd-1.1.0-1.el7.x86_64 (c7-media) Not found Error: Package:

On 06/20/2017 02:27 AM, Charles Lepple wrote: > On Jun 19, 2017, at 10:45 AM, Manuel Wolfshant wrote: >> #lsusb -vvv -d 0463:ffff >> >> Bus 002 Device 012: ID 0463:ffff MGE UPS Systems UPS > ... >> HID Device Descriptor: >> bLength 9 >> bDescriptorType 33 >> bcdHID 1.10

On Oct 25, 2016, at 8:08 PM, Michael Evans wrote: > > It seems that the UPS I bought is actually served by the blazer_usb driver. > > USB ids 06da:0003 (lsusb DB thinks it's a "Phoenixtec Power Co., Ltd 1300VA UPS", but this has apparantly been re-used by Eaton 5E2200USB-LA) > > It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS > > SKU: 147140 Mfr

Hello, I have a Yunto e a Zanto ups connected with usb with id 06da:0002 and 06da:0601. I have seen that people had some success using megatec driver. But now megatec is replaced by blazer-usb and I am not able to use my upses under nut. Can you help me? Thanks! Mario

Hi, I am unable to get my UPS working with NUT. Information: lsb_release -a: Distributor ID: Raspbian Description: Raspbian GNU/Linux 8.0 (jessie) Release: 8.0 Codename: jessie apt-cache policy nut-server: nut-server: Installed: 2.7.2-4 Candidate: 2.7.2-4 Version table: *** 2.7.2-4 0 500 http://mirrordirector.raspbian.org/raspbian/ jessie/main armhf Packages

It seems that the UPS I bought is actually served by the blazer_usb driver. USB ids 06da:0003 (lsusb DB thinks it's a "Phoenixtec Power Co., Ltd 1300VA UPS", but this has apparantly been re-used by Eaton 5E2200USB-LA) It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS SKU: 147140 Mfr Part #: 5E2200USB-LA UPC: 743172064875

UPS: PowerWalker VFI 3000RT LCD CentOS 6.5, nut installed from RPM package: nut-2.6.5-2.el6.x86_64 nut-client-2.6.5-2.el6.x86_64 Driver: blazer_usb Problem description: USB device "loops" when starting blazer_usb. USB device permissions are ok. Receives some information. Error messages: "failed to claim USB device: could not claim interface 0: Device or resource busy"

Hallo all. I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed. i tried the blazer_usb <http://www.networkupstools.org/docs/man/blazer_usb.html> driver and others but i didn't succeed. My lsusb says Bus 002 Device 005: ID 0925:1234 Lakeview Research Bus 004 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 004 Device 004: ID 0424:2228 Standard

Hi all, I have problem with UPS from PowerWalker model VFI 2000 RT LCD over USB (didn't try serial yet). UPS should work via HID driver but ups.status is not rendered properly. Specification of UPS says USB HID compatible. HID driver is the only one which talks with UPS as i try a few from /lib/nut. I use driver usbhid-ups (which communicate with ups), but subdriver resolving is

Ok, I installed the ups, and installed nut, and /proc/bus/usb/devices says this T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06da ProdID=0002 Rev= 0.01 S: Manufacturer=POWERWARE S: Product=Powerware UPS C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00

Thanks for reply. when i try richcomm_usb or blazer_usb or other usb i get the output of : sudo /lib/nut/usbhid-ups -a trust -DD this is the output: Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 Error: UPS [trust] is for driver richcomm_usb, but I'm usbhid-ups! i tried to set the ups.conf to: [trust] driver = usbhid-ups port = auto vendorid = 0925

Was anybody able to read the logs and come up with an error? -------- Original Message -------- Subject: Re: [Nut-upsuser] Powerwalker VI 2200VA LCD Local Time: October 16, 2016 11:47 PM UTC Time: October 16, 2016 9:47 PM From: hyouko at gmail.com To: Lars de Bruin <lars at larsdebruin.net> nut-upsuser <nut-upsuser at lists.alioth.debian.org> 2016-10-10 15:28 GMT+02:00 Lars de

Hi to everyone! I'm posting here after digging around the nut-upsuser and nut-upsdev mailing list, hoping I didn't miss something important. I'm trying to make my ups working with nut: it's a Tecnoware ERA LCD 0.85 which uses the so-hated UPSilon 2000 software to connect via usb. Personally I checked and seems that this junk software only works from windows, I'm trying to

Device web page http://www.samurai-power.com/samurai-smart-1000-lcd UPS is marked as Micropower LCD 1000, but in Slovenia is remarked as Samurai LCD 1000 [ups] driver = blazer_usb port = auto vendorid = 0001 productid = 0000 upsc ups Init SSL without certificate database battery.charge: 100 battery.voltage: 27.40 battery.voltage.high: 26.00 battery.voltage.low: 20.80 battery.voltage.nominal: