similar to: Hardware compatibiltiy list -- NetUPS

Someone might want to add this to the docs - cable list and compatibility list - took me way to long to find. I was trying to find information on my UPS and came up with the following names for the same UPS series. Powerware 5119 Exide name was NetUPS SE Deltec name was PowerRite Pro II (1000VA-3000VA) What I have: The Exide NETUPS SE model PRC2400a p/n 05144038-3904 OUTPUT 2400VA 1600 WATTS

My UPS is an Exide NetUPS SE PRC1500i (1500 VA), also known as Powerware 5119, according to Karl Schmidt (http://lists.alioth.debian.org/pipermail/nut-upsuser/2005-July/000026.html) also Deltec PowerRite Pro II, and according to http://www.usedups.de/compaq_ups.html also Compaq R3000h. I am not sure if the information in http://www.bps.hu/powerware/model_en.html is to be interpreted as that it was

My UPS is an Exide NetUPS SE PRC1500i (1500 VA), also known as Powerware 5119, according to Karl Schmidt (http://lists.alioth.debian.org/pipermail/nut-upsuser/2005-July/000026.html) also Deltec PowerRite Pro II, and according to http://www.usedups.de/compaq_ups.html also Compaq R3000h. I am not sure if the information in http://www.bps.hu/powerware/model_en.html is to be interpreted as that it was

Once again, I am attempting to refine NUT support for my older (Eaton)Powerware Prestige 9 UPS units. The issue is that the BCMXCP driver currently in NUT, optimistically assumes that everything in the XCP protocol document (C1 - as in the NUT archives) is available on all units, and that (even stated in the doc) is not the case.? For instance, the "Extended" block is stated to have

Hello, I have an NETYS RT 1/1 UPS, which is not fully supported. Starting snmp driver displays: [root at kvm1 ~]# snmp-ups -a local Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.4) Duplicate driver instance detected! Terminating other driver! No matching MIB found for sysOID '.1.3.6.1.4.1.2254.2.4'! Please report it to NUT developers, with an 'upsc' output for your

Hello, I have an NETYS RT 1/1 UPS, which is not fully supported. Starting snmp driver displays: [root at kvm1 ~]# snmp-ups -a local Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.4) Duplicate driver instance detected! Terminating other driver! No matching MIB found for sysOID '.1.3.6.1.4.1.2254.2.4'! Please report it to NUT developers, with an 'upsc' output for your

Hello, I have a Legrand Keor T [1] monitored via snmp, everything seems to work fine, upsc output looks good [2] except that I can?t get the low battery state "OB LB? as usual (it works fine with others UPS like APC or Dell). Here is the configuration : [lgups] driver = snmp-ups port = 192.168.99.60 community = public snmp_version = v2c mibs = auto

From: "Hilliard, Jay" <Jay.Hilliard at disney.com> > We've had lots of trouble with nvidia's driver version 1.0-7174 which > was current last week. Yep, it's the first of a new series (7000 -- sounds like it'll support NV5x out-of-the-box), so that's expected. > Today there is a new driver (1.0-7664) which has fixed lots of issues > for us,

Hi, we run a RHEL4 E-Mail-Server with dovecot-0.99.11-2.EL4.1. we use mbox and most users use imap. So I have set quota for the devices where the user mailfiles are saved. No I'm getting the situation, that users exide there quota but yet not the grace limit and the user isn't able to delete messages. e.g. the the soft limit is 100 MB, the hard limit is 110 MB. So there should be

I am just starting to learn Sweave (really neat tool). I am pretty early in the learning curve (I had to think a moment ago whether a # or % was the appropriate comment character). I have successfully incorporated simple graphics and outputs, but am having trouble getting a latex (xtable) table to function properly. Latex is seemingly treating the xtable code as input or verbatim text. That

What about idea not to *add* pae versions of xen kernels, but to *replace* non-pae versions with pae versions? Rationale: - not increase in archive size or linux-2.6 package build time, - this will improve compatimility with other distros (consider scenario when running FC or RHEL in domU; these distros do ship only pae xen kernels, according to

OK, I have managed to get software RAID 1 running on my wonderful Proliant server but now have two challenges: 1) Fresh after an OS install and reboot, the RAID array starts to do its stuff but straight away (as part of the boot messages) I am told that the second disk is 'not ready for command' and the system hangs as soon as resyncing starts. I think this is fixed by adding an hdparm

Hello, I currently get anova results out of the aov function (see below) I use the model.tables and I believe it gives me back the model parameters of the fit (betas), however I don't see the intercept (beta_0) and don't understand what the "rep" output means and there is no description in the documentation. Another question: is there a function that outputs the results in a

Dear R users, I am reading data from a file where there are some missing that are represented by -9999.00. I am using the command below. =====My original data =========== PARM = TMPC;T12X;T12N;DWPC;PALT;SKNT;DRCT;P24M;CLCL STN YYMMDD/HHMM TMPC T12X T12N DWPC PALT SKNT DRCT P24M CLCL 820420 110429/1200 22.50 -9999.00

Hi, I have UPS Socomec ITYS 3000 with Netvision card. OS is Centos 6.5 64-bit. NUT installed with yum,. nut-2.6.5-2.el6.x86_64 nut-client-2.6.5-2.el6.x86_64 Why is ups.status empty? Here is upsc output: upsc myups at localhost battery.charge: 97.00 battery.runtime: -60.00 battery.voltage: -0.10 device.mfr: Net Vision v6.01 (SN 0101414290) device.model: ITYS 3 kVA device.serial: 3I14450043

Good morning, i have an Xanto S1000 USV the Manufactor is ONLINE USV-Systeme AG. I tried all the buildin drivers, also the driver for the driver for the Generic UPS, nothing worked for this UPS so now my question has anyone else this UPS and functional driver? Thanks and Greets Dennis

I've just upgraded NUT from 2.0.2 to 2.2.0 and have read the upgrading file, which led me to submitting this message. I have changed nut.conf to use 'driver = usbhid-ups' and 'productid = ffff', but I still get 'No matching HID UPS found' when I try to start the driver. The UPS (a Liebert PowerSure Personal XT 450VA) was working fine with 2.0.2 and the hidups

Hi, I don´t think that this is a ext3 Problem, since you have problems partitioning that disk. Perhaps a hdparm -i /dev/hdX could shine some light on this, also a fdisk -l /dev/hdX could be useful. For now - let me guess: <guess> To me, it seems, that the disk is clipped to 32GB, perhaps the mainboard bios can not cope with a disk >32GB - just a thought. Since the manufactorer

Hi Mark Did you or anyone else ever find a satisfactory solution to this? Are there any phones which provide voice through the serial connection? What about the nokia card phone - does it have open source drivers? Cheers Rob On Sat, Jul 13, 2002 at 10:31:53AM -0500, Mark Spencer wrote: > Does anyone (maybe in Europe) know how I could build a GSM compatible > channel for Asterisk, so

Hi to all, we are searching for a hardware based DSP solution for use with Asterisk based on PCI or MiniPCI to reduce main processor load and to use embedded boards with Digium E1/T1 cards like TE410P. does anyone know about any manufactorer of those cards or someone who is able to develop/build such cards? Specifications: PCI or MiniPCI up to 120 concurrent transcodings Codecs: G.729/G.729A or