similar to: Cyber Power 1000AVR LCD issue

I recently installed NUT 2.4.3 and found that the USB drivers were logging an insane amount of data to syslog: usbhid-ups | daemon debug | Apr 16 18:29:40 | libusb_get_report: No error usbhid-ups | daemon debug | Apr 16 18:29:40 | libusb_get_report: No error usbhid-ups | daemon debug | Apr 16 18:29:40 | libusb_get_report: No error usbhid-ups | daemon debug | Apr 16 18:29:40 |

Greetings: I'm evaluating two replacements for UPS upgrades to my dept. Because the CyberPower OP650 has been retired, we are evaluating the CyberPower600VA and the CyperPower 1000AVRLCD. We will be evaluating others. Initial configuration and communications are established via the usbhid-ups driver, the gambit of tests are all passed with the exception of one. I seem to be failing

[updated] OpenBSD 6.1/amd64 NUT 2.7.4p0 (from OpenBSD package) Results of upsc: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 2902 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 26.9 battery.voltage.nominal: 24 device.mfr: CPS device.model: CP1500AVRLCDa device.serial: CTHGN200xxxx device.type: ups driver.name:

I have a Cyber Power LE1000DG UPS I got from Best Buy this weekend. I plan to use it with a TrueNAS scale system, and it is connected via USB. Vendor link: https://www.cyberpowersystems.com/product/ups/battery-backup/le1000dg/. TrueNAS has you pick a UPS driver. I could not find any "LE" related models on https://networkupstools.org/stable-hcl.html (which is the list TrueNAS uses). Per

Cyber Power Systems CP600LCD https://www.cyberpowersystems.com/product/ups/cp600lcd/ upsc output: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 2220 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.5 battery.voltage.nominal: 12 device.mfr: CPS device.model: UPS CP600 device.type: ups driver.name: usbhid-ups

I recently purchased a Cyber Power 700 AVR UPS. I installed it just fine and wanted to install NUT to monitor the unit. I searched the mailing list and found a similar post. However, the distro used in that post was different and the unit was slightly different (900 AVR). My server is running Debian Lenny. The Cyber Power UPS is connect to one of the serial ports using the cable that came with

Cyber Power Systems AVRG750U https://www.cyberpowersystems.com/product/ups/avrg750u/ upsc output: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 15360 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 24.0 battery.voltage.nominal: 24 device.mfr: CPS device.model: AVRG750U device.serial: <REDACTED> device.type: ups

Hi Charles, The posting at https://github.com/networkupstools/nut/issues/432#issuecomment-405371395 references ups.delay.start and suggests setting it to -1. upsrw -l pve1 at localhost listed this as modifiable but any attempt at modifying the value failed. I used the *override.ups.delay.start = -1* in nut.conf and this is now being reported. Two observations are that once a variable setting

On May 22, 2017, at 11:13 AM, Mike <the.lists at mgm51.com> wrote: > > On 5/21/2017 10:39 AM, Charles Lepple wrote: >> >> Let me know if you're interested in figuring out if the battery.mfr.date value is stored somewhere else. > > Of course. The UPS is in production (ie., powering the servers in my > house), so it may be a few days before I can ~play~.

Cyber Power Systems CP1000PFCLCD = upsc output = attached = Shutdown results = I experienced a genuine power outage shortly after setup. The 1 master system and the 1 slave system both shutdown successfully. The master shutdown before the slave (*not* a bug report; I may not have this configured correctly yet). The UPS was not powered off by the master. I don't know if the UPS

CyberPower Battery Backup with Surge Protection, model LE825G Appears to function properly with the driver listed on the HCL for the Cyber Power Systems ups 2 685AVR USB (usbhid-ups). Tested with shutdown mode "UPS Goes On Battery" with a 5 second timer and the system successfully shutdown as expected. upsc output: upsc ups battery.charge: 100 battery.charge.low: 10

[please use Reply-All - this list does not modify the reply-to header] > On Nov 23, 2016, at 10:30 AM, Craig STCR <craig.stcr1 at gmail.com> wrote: > > It looks like the CyberPower Cyber Power Systems CP685AVR supported by > usbhid-ups has a favorable device dump linked to the Devices Dumps > Library page here: > >

Cyber Power UPS Model LX1500GU *upsc output:* root at freenas:~ # upsc ups at localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 5670 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 24.0 battery.voltage.nominal: 24 device.mfr: CPS device.model: LX1500GU device.serial: QAKGP2000252 device.type: ups driver.name:

Nut Developers, I have unsuccessfully tried to solve a problem with the voltage value on my Cyber Power UPS CP1000AVRLCD. Something is wrong with the battery voltage calculation. It always reads around 20 volts with that's nuts (pardon the pun). Right now: battery.voltage : 20.3 You can take a look for yourself at http://www.3111skyline.com/nutindex.html Is there a parameter I can check

OpenBSD 6.1/amd64 NUT 2.7.4p0 (from OpenBSD package) Results of upsc: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 2902 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 26.9 battery.voltage.nominal: 24 device.mfr: CPS device.model: CP1500AVRLCDa device.serial: CTHGN200xxxx device.type: ups driver.name: usbhid-ups

It looks like the CyberPower Cyber Power Systems CP685AVR supported by usbhid-ups has a favorable device dump linked to the Devices Dumps Library page here: http://networkupstools.org/ddl/Cyber_Power_Systems/CP685AVR.html However, it is not listed anywhere on the Hardware Compatibility List (HCL) page here: http://networkupstools.org/stable-hcl.html This appears to be an omission on the HCL

Hi, I'm running an internet cafe using Cyber Cafe Pro software. This software is design soley for Windows platforms. We're constantly experiencing problems with Windows with regards to viruses and stability issues. Recently, we lost all our data and had to re-install. May you please help us in flawlessly porting this application so that it can run on Linux both on the server and client

Mike, Thanks for the info. I have enough to add an entry to the DDL, but I have a few more questions inline. On May 14, 2017, at 1:21 PM, Mike wrote: > > [updated] > > OpenBSD 6.1/amd64 > NUT 2.7.4p0 (from OpenBSD package) > > > Results of upsc: > > battery.charge: 100 > battery.charge.low: 10 > battery.charge.warning: 20 > battery.mfr.date: CPS Let

On 5/21/2017 10:39 AM, Charles Lepple wrote: > Mike, > > Thanks for the info. I have enough to add an entry to the DDL, but I have a few more questions inline. > > On May 14, 2017, at 1:21 PM, Mike wrote: >> >> [updated] >> >> OpenBSD 6.1/amd64 >> NUT 2.7.4p0 (from OpenBSD package) >> >> >> Results of upsc: >> >>

Hi all, Am setting up a internet cyber cafe of roughly 50 or so boxes running on CentOS 5.0. Now the question is. Does someone on the list know of a open source cyber timer/cybermanager which runs on CentOS(LINUX) and where i can download it? All that am getting are M$ based.(grrrh). Thanks. ------------------------------------------------- David Maina. Systems/Network Administrator. PdE-Kenya.