Displaying 20 results from an estimated 300 matches similar to: "APC USB UPS vs FreeBSD 6.x"
2005 Aug 18
3
RE: newhidups and APC Back-UPS CS 350 (Thomas Jarosch)
Thomas,
The none (-22) message in your log is an errno from the
libusb_get_interrupt() call in HIDGetEvents() in libhid.c.
It indicates an invalid ioctl type.
In HIDGetEvents() there is a comment with that call:
/* needs libusb-0.1.8 to work => use ifdef and autoconf */
You may want to make sure your libusb is up-to-date.
Hope this helps, AG
--
2017 Dec 04
2
SNMPv3 fails when more than one UPS is configured in ups.conf
Hi Charles,
Running upsdrvctl -D start on the host with all three configured to
SNMPv3 kicks out 56 different "unhandled ASN 0x81 from ..." lines on all
three but importantly they all start up and keep running.
I'm starting to suspect the startup is taking so long that systemd is
timing out and killing it. time -p reports real time of 133.27. I'm not
a fan of systemd but
2009 Aug 02
1
MGE Evolution mge-utalk Driver Not Connected error
Hi All,
I have an mge pulsar esv 14+ rackmount UPS connected via straight
through serial cable to a USB to serial adaptor (My motherboard does
not have a native RS232 port).
I am running Ubuntu Server 9.04 x64, and nut 2.4.1-2ubuntu4 installed via APT.
I am getting the error:
Poll UPS [ups1 at localhost] failed - Driver not connected
My conf files:
(ups.conf)
[ups1]
driver=mge-utalk
2007 Jun 11
2
Column sort of checkboxes
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
I''ve gleaned a lot of good advice from reading this group and I''m
hoping for more
2009 May 05
5
upsd flapping in the breeze
Hi,
I have had a long standing problem with NUT talking to 110V MGE UPSs on
FreeBSD, I was recently investigating again and noticed that upsd seems
overly noisy, eg..
May 5 03:50:36 egbert upsd[96662]: UPS [ups1] data is no longer stale
May 5 03:50:36 egbert upsd[96662]: Data for UPS [ups1] is stale - check driver
May 5 03:50:36 egbert upsd[96662]: UPS [ups1] data is no longer stale
May 5
2013 Oct 09
2
Updated to 2.6.5, previously-working APC SmartUPS now fails completely
(Note that I mentioned this *was* previously working with an older version
of Nut).
[irs2-ups1]
driver = snmp-ups
port = irs2-ups1.sum.naoj.org
mibs = auto
community = private
irs2-ups1.sum.naoj.org responds to pings.
On Tue, Oct 8, 2013 at 3:55 PM, Tim Rice <tim at multitalents.net> wrote:
> On Tue, 8 Oct 2013, Philip Tait wrote:
>
> > Here is the upsc
2008 Jul 22
1
MGE Pulsar EX1500 RT comms problem
Hi,
I have the above UPS connected to a FreeBSD 6.2 box and it shows 'data
stale' very frequently (every few minutes).
I have tried the usual trick of setting maxage, poll interval, etc etc
but to no avail.
When I wind up logging I see (on mge-shut)
entering shut_get_report(id: 0d, len: 1800)
shut_wait_ack(): ACK received
entering shut_get_report(id: 16, len: 1800)
shut_wait_ack():
2007 Apr 20
2
Multiple UPS monitoring, relaying
Hello,
I've got a setup with NUT, where we've got two UPSes,
ups1 and ups2. UPS1 supports our servers, while UPS2
supports our desktop boxes. We monitor both of them
via USB on a box now called "upsmon".
The interesting point comes here. We monitor both
UPSes on the upsmon box, but if UPS2 fails, which
supports our desktop boxes, NUT shouldn't initiate
a shutdown in
2007 Apr 20
1
USB problem as user
Hello
I'm having a bit of a trouble to set up a Back-UPS on
a production box.
We're using the newhidups driver for this module here, in
the office, and I'd like to monitor the one, out in our
server farm.
The situation is the following:
# /lib/nut/newhidups -u root -DD -a ups1 2> ups1.out
Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30
(2.0.5)
this one worked
2011 Mar 14
1
UPS Support
I am currently trying to use your NUT program to monitor a SMART3000RMOD2U TRIPP LITE device. I find that it connects with the in the device folder as hiddev0 and if I connect a second device it connects under hiddev1. I attempted to use your software with the driver=usbhid-ups and port=auto, but when I try to discover it it can't be found. Then when I run the command /sbin/usbhid-ups -a
2011 Jul 26
0
[RFC] PowerChain: add LIST POWERCHAIN and GET POWERCHAIN to the client (network) protocol
Hi,
this is the 2nd part of the PowerChain RFC.
2011/6/13 Arnaud Quette <aquette.dev at gmail.com>
> As already presented, the links below will describe in details the
> PowerChain notion:
>
> https://wiki.ubuntu.com/ServerOneiricInfraPower
> https://wiki.ubuntu.com/ServerOneiricInfraPower#PowerChain%20design
>
2013 Oct 09
0
Updated to 2.6.5, previously-working APC SmartUPS now fails completely
On Tue, 8 Oct 2013, Philip Tait wrote:
> Here is the upsc output:
>
> # /usr/local/ups/bin/snmp-ups -DD -a irs2-ups1
> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5)
> 0.000000 debug level is '2'
> 0.000327 SNMP UPS driver : entering upsdrv_initups()
[snip]
> 4.457750 No supported device detected
I'm using a APC smart ups with a
2012 Mar 04
2
NUT Two Apc UPSes on Windows
Hi,
I've got a question about managing two UPSes under NUT.
I have two similar model APC usb-connected UPSes to work with, but don't
know how to manage them simultaneously from under Windows. Long story
short, my ups.conf looks like this:
--- ups.conf ---
[ups1]
driver= usbhid-ups
port= auto
serial=AS1054340323
[ups2]
driver= usbhid-ups
port= auto
serial=AS1026662626
---
2009 Nov 15
3
two MGE Ellipse 1500 ups via usb
Hi,
I've got two MGE Ellipse 1500 UPS connected via usb to an ubuntu
jaunty system with nut and libupsclient1 2.4.1-2ubuntu4.
As soon as I start the driver for the second one, they start fighting
each other and I get no data. I found an older post to this list that
said: If you want to monitor multiple UPSes through usbhid-ups, you
*must* make sure that each one can be uniquely identified
2007 Sep 07
2
Bug#439055: hid driver tries to mmap huge area, fails
tags 439055 upstream
thanks
Hi Joey,
interesting setup! Do you use it (the arm) to monitor the UPS and send
notifications...
I've sadly not much time to investigate, but have you tested the latest trunk?
also, you mention that it was working before: which nut version? what
has changed since?
2007/8/21, Joey Hess <joeyh at debian.org>:
> Package: nut
> Version: 2.0.5-3+b1
>
2007 Apr 12
1
APC 1500 USB problem
Hello,
We have two APC Back-UPS RS 1500 USB stuff, and i've got a bit
of a problem with it and NUT.
The usbdevs output:
addr 2: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion
addr 3: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion
(UPS1 and UPS2)
I've configured our NUT system to monitor the UPSes, and it went very
fine till the time had arrived for a
2007 Feb 07
1
Network Management Card (MGE) 66102 with snmp-ups
I'm trying to set up nut with a MGE UPS equiupped with a network
management card, but encountered a problem.
UPS: MGE Pulsar M 3000
Network Management card (installed in the UPS): 66102 (2006 edition)
Operating system: FreeBSD
Nut port version: 2.0.5
Nut driver: snmp-ups
According to MGE in Norway this card is supported by nut, but only
the old version of the card (66244) is listed on
2005 Dec 24
1
Regular expressions in upssched.conf?
Hi,
I didn't found an answer for my question in NUT documentation/FAQ or
this mailing list archive so I?m posting it here.
I want to start a timer only if both of my UPSes remain on battery. Not
just one, both.
My UPSes are:
- ups1@host-a
- ups2@host-b
Is it possible to use something like this in upssched.conf?
AT ONBATT ups1.* && ups2.* START-TIMER onbattwarn 180
Thanks,
2010 Sep 26
3
Cannot connect to APC Smart via USB under FreeBSD
Hi, folks!
There is FreeBSD 7.1, NUT 2.4.1, UPS APC Smart 2200 XL.
NUT is compiled from ports with following options:
---------------------------------------
_OPTIONS_READ=nut-2.4.1_5
WITH_SERIAL=true
WITH_USB=true
WITH_SNMP=true
WITHOUT_NEON=true
WITHOUT_PDU=true
WITHOUT_HAL=true
WITHOUT_IPV6=true
WITHOUT_CGI=true
---------------------------------------
UPS is successfully recognized by OS
2019 Dec 25
1
NUT not shutting down one of three UPSs (sometimes none of them shut down)
I have three APC SmartUPS 5000s. Two of them are AP9617 and one is AP9619.
I have a RS-232 connections from my monitor host to all three. All three
report status and give information.
One of the two AP9617 - ups3-1 - does not shut down when FSD is sent. It
did when I first set this system up a year or two ago but it's stopped
doing so since then. Resetting the management interface does not