similar to: order of subdirectories and nut-usbinfo.pl

On Mon, Dec 1, 2008 at 7:43 PM, Alexander Gordeev <agordeev-guest at alioth.debian.org> wrote: > Author: agordeev-guest > Date: Tue Dec 2 00:43:04 2008 > New Revision: 1589 > > Log: > * added lakeview_usb driver. Could we possibly rename this driver before it gets into 2.4? As I mentioned in another thread, Lakeview Research is probably not the manufacturer. Note that

Hi all, i've read a thread about this UPS from Peter van Valderen. He tried to develop a driver for this specific type of UPS. I've downloaded nut-2.2.2 and tried to apply the patches (lakeview.patch & lakeview.v2.patch) but both resulted in rejected chunks. I've tried to ./configure with type lakeview and then a make, but the make command fails. Does anybody has any

On May 29, 2015, at 8:09 AM, Bastien Nocera <hadess at hadess.net> wrote: > It would also be useful to include a full URL to the NUT Perl script > (to a git repository perhaps), so people don't need to check out the > full repo to update it. I'm not sure how useful the nut-usbinfo.pl script will be without the NUT repository: it scans the NUT source files for certain

On Thu, Dec 4, 2008 at 4:51 PM, Arjen de Korte <adkorte-guest at alioth.debian.org> wrote: > Author: adkorte-guest > Date: Thu Dec 4 21:51:28 2008 > New Revision: 1596 > > Log: > Added new richcomm_usb driver based on the lakeview_usb driver (using libusb). Sorry if I wasn't clear - I was advocating *renaming* the lakeview_usb driver to richcomm_usb. Is there another

Hi, are this UPS supported by any other driver than "richcomm_usb". The device works with richcomm_usb, but only signals online, offline etc. Not voltage, batterylevels etc. Bus 006 Device 009: ID 0925:1234 Lakeview Research Bus 006 Device 009: ID 0925:1234 Lakeview Research Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10

On Wed, Dec 3, 2008 at 4:05 PM, Arjen de Korte <nut+devel at de-korte.org> wrote: > Citeren Charles Lepple <clepple at gmail.com>: > >> Note that this is the same VID/PID as on this example on the Lakeview >> Research home page: >> >> http://www.lvr.com/usb_on_a_budget.htm >> >> We can include the name "Lakeview Research" in the

Hallo all. I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed. i tried the blazer_usb <http://www.networkupstools.org/docs/man/blazer_usb.html> driver and others but i didn't succeed. My lsusb says Bus 002 Device 005: ID 0925:1234 Lakeview Research Bus 004 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 004 Device 004: ID 0424:2228 Standard

Hi Richard and the list, you'll find attached a patch for 95-upower-hid.rules, which adds: - the "usbmisc" filtering, as added in your repo, - more comments, including one that points at your UPower repo, - 3 new manufacturers (Minibox, iDowell and Powerware) - a bunch of new devices (7 HP, 1 APC, 1 TrippLite, 2 PowerCOM and 2 Liebert) cheers, Arnaud -- Eaton Data Center

Citeren Arnaud Quette <aquette.dev at gmail.com>: > Author: aquette > Date: Sat Nov 15 21:50:40 2008 > New Revision: 1556 > > Log: > USB "improved maintenance" code. Refer to docs/new-drivers.txt for > more information... > > Added: > trunk/drivers/usb-common.c > trunk/drivers/usb-common.h > trunk/tools/ > trunk/tools/Makefile.am >

2015-06-04 13:04 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > On Sat, 2015-05-30 at 18:51 +0200, Arnaud Quette wrote: > > > > > > 2015-05-29 14:09 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > > > On Fri, 2015-05-29 at 13:59 +0200, Arnaud Quette wrote: > > > > Hi Richard and the list, > > > > > > > >

Hi, I'm having a hard time configuring a Mustek Powermust 600VA ups to work via USB with nut. I read somewhere that nut works OK via the rs232 cable, but unfortunately I don't have a COM port in my computer. The kernel detects the ups as an Xbox pad :) and loads the xpad module. I tried running /lib/nut/megatec with different /dev/ttySx but it displays megatec protocol UPS was not

I am running dovecot 2.1.7 on Debian Squeeze 64 bit, config information at the end of the email. I am working on a Kerberos/GSSAPI based setup that requires cross-realm authentication. I have regular GSSAPI working, I can log in using pam_krb5 with password based logins or with the GSSAPI support when using a kerberos ticket in the default realm. However when I attempt to authenticate using

I have a Gentoo linux (OpenRC) desktop connected to a UPS, the brand is Vultech, but lsusb gives me this: Bus 003 Device 006: ID 0925:1234 Lakeview Research and I found an article about this hardware here, someone had it working with the richcomm_usb driver: http://verahill.blogspot.it/2012/12/kstar-australia-1500-va-ups-on-debian.html So, I installed nut and configured my UPS to work with the

Does asterisk support using an H.323 provider for outgoing calls? From everything I have found, it looks like it does. However, I have had no success in getting it to work. I would really appreciate if somebody could give me a hand. I am using the channel that comes with asterisk. I have also tried using the channel from inaccessnetoworks but have not had any more success. My provider

Hello, I have somewhat of a weird data set and am attempting to create a barplot with it. I have 8 columns with different variables and their percentages. I have 1 column with representations of 4 different treatments the variables undergo. I also have 1 column with year the data was recorded. I want to create a bar plot that plots all 8 variables grouped by treatment and year. I've tried

> You have several hundred more Critical or Important security updates > outstanding. If that box touches the Internet in any way, it is likely > compromised. Just in the last 6 months there are 21 Important or > Critical updates. That is an important qualifier: *If* that box touches the Internet in any way. Although one might add that attacks on the LAN can be nastier since there

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a situation where some Poptop/PPTP sessions (only with FC5/Shorewall to FC5/Shorewall firewall in between) cause the following to appear in the state table (shorewall show connections). unknown 47 420 src=XX.234.79.183 dst=XX.234.137.226 packets=2 bytes=130 [UNREPLIED] src=XX.234.137.226 dst=XX.234.79.183 packets=0 bytes=0 mark=0 use=1

2015-06-08 13:06 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > On Mon, 2015-06-08 at 09:45 +0200, Arnaud Quette wrote: > > > > > > 2015-06-04 13:04 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > > > On Sat, 2015-05-30 at 18:51 +0200, Arnaud Quette wrote: > > > > > > > > > > > > 2015-05-29 14:09 GMT+02:00

Hello guys, Please help me to resolve the issue. I bought 'SVEN Power Pro+ 500 USB' UPS few days ago and tried to setup NUT 2.6.0 to work with it. blazer_ups driver doesn't recognize the UPS :( The Manufacturer provides 'PowerD' software for linux with installation instractions on a CD (see example below). --------===------- Welcom to PowerManager System!

---------- Original Message ---------------------------------- From: "Jim Van Eeckhoutte" <jim@vaneeckhoutte.com> Reply-To: <jim@vaneeckhoutte.com> Date: Mon, 8 Jul 2002 15:27:14 -0700 this is shorewall status output: tcp 6 431899 ESTABLISHED src=192.168.20.5 dst=64.4.12.45 sport=2185 dport=1863 src=64.4.12.45 dst=63.25.123.58 sport=1863 dport=2185 [ASSURED] use=1