Hi Darren,
Ok, asterisk's H.323 channels works fine. Do you know why you get
disconnect from (or can't connect to) your provider? There are some
debug available (h.323 debug command).
Probably, if you must use G.729 or G.723, you should know you need to
buy licenses for this codecs. If you wish to use G.729, you can buy your
licenses from Digium, install the licenses and recompile * with G.729
support.
Daniel
Darren Wiebe wrote:
> Does asterisk support using an H.323 provider for outgoing calls?
> From everything I have found, it looks like it does. However, I have
> had no success in getting it to work. I would really appreciate if
> somebody could give me a hand. I am using the channel that comes with
> asterisk. I have also tried using the channel from inaccessnetoworks
> but have not had any more success. My provider has not been able to
> help a lot but they have confirmed that I am using the correct dial
> string. They have also confirmed that they only support G729 and
> G723. Sorry about the long post, I thought I better send all the info
> though.
>
> Darren Wiebe
> aleph@hagenhomes.com
>
> chan_h323.so The NuFone Network's Open H.323 Channel 0
>
>
> This is the result of the following callfile:
>
> -- Attempting call on h323/101014037402962@65.17.207.253 for
> 9999@meetme:1 (Retry 1)
> Aug 19 09:18:30 WARNING[-1273607248]: channel.c:1659 ast_request: No
> translator path exists for channel type h323 (native 257) to 64
> Aug 19 09:18:30 NOTICE[-1273607248]: channel.c:1597
> __ast_request_and_dial: Unable to request channel
> h323/101014037402962@65.17.207.253
> Aug 19 09:18:30 NOTICE[-1273607248]: pbx_spool.c:235 attempt_thread:
> Call failed to go through, reason 0
>
> Callfile:
> MaxRetries: 2
> extension: 9999
> Channel: h323/101014037402962@65.17.207.253
> CallerID: LAKEVIEW 4037422000
>
> This is my h323.conf file:
>
> ; The NuFone Network's
> ; Open H.323 driver configuration
> ;
> [general]
> port = 1720
> bindaddr = 0.0.0.0
> disallow=all
> allow=g723.1 ; Hm... Proprietary, don't use it...
> allow=g729
>
> dtmfmode=rfc2833
>
> gatekeeper = 65.17.207.253
>
> context=incoming
>
> [h323]
> type=h323
> prefix=1010
> context=outgoing
>
>
>
> If I enable all the codecs and switch debug on then this is my output.
> -- Attempting call on h323/101014037402962@65.17.207.253 for
> 9999@meetme:1 (Retry 1)
> Aug 19 09:23:09 NOTICE[-1273545808]: pbx_spool.c:235 attempt_thread:
> Call failed to go through, reason 1
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>