similar to: usbhid-ups.h: hid_info_t structure

W dniu 24.08.2018 o 13:10, Charles Lepple pisze: > Sorry, I didn't mean to imply that the master branch was necessarily going to be different, just wanted to make sure you had everything set up to recompile. The real test is to see if things change after commenting out that line (such as by changing it to start with "//"): > > // { "shutdown.return", 0, 0,

Hi Here is a very minor patch for the bcmxcp.c driver, mainly fixing the function name used in debug statement, and at the same time fix indentation. Regards Alf Hogemark From 86c7940d0ea11b5b38a7f4518095ee2428d658c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alf=20H=C3=B8gemark?= <alf at i100.no> Date: Mon, 1 Jul 2013 21:11:40 +0200 Subject: [PATCH] bcmxcp: Fix method name outputted in

W dniu 23.08.2018 o 02:16, Charles Lepple pisze: > > For some reason, this is being hardcoded to 1: > > drivers/apc-hid.c- /* used by APC BackUPS CS */ > drivers/apc-hid.c: { "shutdown.return", 0, 0, "UPS.Output.APCDelayBeforeReboot", NULL, "1", HU_TYPE_CMD, NULL }, > > Can you rebuild the NUT drivers as described here?

I'm doing testing of the UPS-side code, including being able to tell the UPS to shutdown and then come back up after a while (if power has returned). I'm trying to use upscmd so that I don't have to do an actual shutdown, but when I have it list the commands for my UPS, I just see 4 commands, and they're not the ones I thought I had specified. load.on load.off shutdown.return

Hi, the diff inline below adds a new subdriver for snmp-ups to support Huawei UPS, based on an observed walk from a UPS5000-E with a few bits filled in from the MIBs (copy at http://junkpile.org/HUAWEI_UPS_MIB/). Sample output from upsc follows the diff. cheers, Stuart diff --git a/data/driver.list.in b/data/driver.list.in index a0e82fb..fac3d5a 100644 --- a/data/driver.list.in +++

Hi Rob I still have an unset draft answer to your previous mail... but you seem to have progressed... 2015-03-20 16:32 GMT+01:00 Rob Groner <rgroner at rtd.com>: > I?m doing testing of the UPS-side code, including being able to tell the > UPS to shutdown and then come back up after a while (if power has returned). > > > > I?m trying to use upscmd so that I don?t have to

I got sick & tired of constant power outages with no warning, so when I saw various UPSes at the store, I decided to get one, and the one I got was a model 200897 from Newpoint (a.k.a. Power Sentry). A couple of days later the power went out and I decided to use the opportunity to hook up the UPS. I added up the wattages of the equipment I would be connecting, and found that the only way I

Hi all! I'm wondering if there's anyone doing any hacking on the snmp-ups driver at the moment. I've started looking at implementing 3phase-support, and this uncovered some rather unpleasant stuff in the snmp-ups driver that I really need to fix in order to get things sane. Those of you that's allergic to SNMP might want to stop reading now, this is rather icky ;)

Hi I'd like to know what you guys think to the following idea. Please be aware, C/C++ are not exactly my strongpoint (couldn't be much further from it actually..!), so I'm not sure whether this is all legal code. -- SYNOPSIS: Allow a newhidups subdriver to register that it can handle settings in ups.conf (and via -x on the command line), as per the normal serial drivers.

Hi, I recently installed a new cyberpower 1200AVR ups using the newhidups driver I built from the subversion source. I am recieving the following error on start up dstate_setflags: base variable (ups.beeper.status) does not exist dstate_setaux: base variable (ups.beeper.status) does not exist Any ideas? Thanks,

Hi Arnaud, Hi Scott, Hi list, Here is a patch to support the Zinto D from ONLINE USV-Systeme AG. I already sent a version to Russell Kroll (2006-04-09), without no response and I cannot find support for Zinto in svn until now. I found a discussion on this list about the Xanto from ONLINE, but the Zinto seems to use different commands. The commands are quite similar to those for Opti-UPS, so I

Hi. I had a problem recently with %subj, and I've solved it. Sent a letter with solution to maintainers, but it seems like I've lost it somewhere. May be just simply forgot to write it.. But anyway. I've noticed that I'm not the only one who had it. So I post the workaround. The problem is similar to the one mentioned in letter with alike subject at Oct. 5. When the UPS

Best fortress support was understandably dropped, but we still use them, and someone else may want the driver I ported to nut-2.0. We also often attach the serial cable from a UPS to a network terminal server, since servers these days don't come with very many serial ports. (They call them "legacy" ports.) I submitted a patch to support these for nut-1.x, and it was rejected

Hi all, we should have been found the problem. Attach the patch inclusive of this problem and the previous (Riello IDG400 wrong values & not powering off). Best regards, -----Messaggio originale----- Da: Nut-upsdev [mailto:nut-upsdev-bounces+e.parisi=riello-ups.com at lists.alioth.debian.org] Per conto di nut-upsdev-request at lists.alioth.debian.org Inviato: mercoled? 7 marzo 2018 13:03 A:

W dniu 24.08.2018 o 23:13, Karol Olszewski pisze: > Hi > I'm bit closer :) > Acctually change "UPS.Output.APCDelayBeforeReboot" to > >   { "shutdown.return", 0, 0, "UPS.Output.APCShutdownAfterDelay", NULL, > "90", HU_TYPE_CMD, NULL }, > > Now, UPS turn off load after 90 sec, but not power ON when power is back > Dear nut

Hi all, I am trying to get a APC Back-UPS CS 500 running on my QNAP 419P Nas. Since on all my work I figure out the following: from Network UPS Tools upscmd 2.4.1 [~] # upscmd -l qnapups Instant commands supported on UPS [qnapups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use

Support the new CCW_CMD_SET_VQ format for virtio-1 devices. While we're at it, refactor the code a bit and enforce big endian fields (which had always been required, even for legacy). Reviewed-by: Thomas Huth <thuth at linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck at de.ibm.com> --- hw/s390x/virtio-ccw.c | 114 ++++++++++++++++++++++++++++++++++---------------

Support the new CCW_CMD_SET_VQ format for virtio-1 devices. While we're at it, refactor the code a bit and enforce big endian fields (which had always been required, even for legacy). Reviewed-by: Thomas Huth <thuth at linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck at de.ibm.com> --- hw/s390x/virtio-ccw.c | 114 ++++++++++++++++++++++++++++++++++---------------

W dniu 22.08.2018 o 14:41, Charles Lepple pisze: > /lib/nut/usbhid-ups -a apc -DDD -k Please see attachement. -- Karol Olszewski ipflow.pl -------------- next part -------------- A non-text attachment was scrubbed... Name: APC_BackUPS_CS_650_fsd.log.gz Type: application/gzip Size: 5735 bytes Desc: not available URL:

On Aug 23, 2018, at 10:46 AM, Karol Olszewski <karol.olszewski at ipflow.pl> wrote: > > W dniu 23.08.2018 o 02:16, Charles Lepple pisze: >> >> For some reason, this is being hardcoded to 1: >> >> drivers/apc-hid.c- /* used by APC BackUPS CS */ >> drivers/apc-hid.c: { "shutdown.return", 0, 0, "UPS.Output.APCDelayBeforeReboot", NULL,