similar to: UPS

My Belking is no longer responding to the megatec driver. I get * Starting UPS drivers ... Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools - Megatec protocol driver 1.5 (2.0.5) Carlos Rodrigues (c) 2003-2006 Megatec protocol UPS not detected. Driver failed to start (exit status=1) * Failed to start UPS drivers! Thank you, Barbara Smith -- Using Opera's

Hi, These are the instructions I have about accessing nut online. By using the cgi use flag you have the files to use on the webserver. > > If you look in /usr/html after emerge you find the html files. > Copy this files to /var/www/localhost/htdocs/nut > (if you want it as www.my.org/nut ) > > > In /usr/share/nut you find the cgi files. Copy this files to >

I just purchased a new ups and I'm unsure about several things. For one thing I don't know what driver I need. Also, it uses a usb port and I had a serial port before. I'm not sure how this needs to be set up. Thanks in advance for help Barbara -- Using Opera's revolutionary e-mail client: http://www.opera.com/m2/

Hi all, I've finally gotten around to setting up the netbook that controls my UPS and I would like to make sure that I've got the metacode correct before configuring nut :) Here's what I've got: Belkin UPS F6C120auUNV * Batteries recently replaced * On battery: 24 port switch, PoE AP, antenna power booster, ADSL modem, MythTV server, 19" monitor * On surge

I'm access nut online via localhost. But I have the following problems. When I click on Statistics I get cannot open /etc/hosts.conf. When I click on settings I get: Error: Can't open upsset.conf to verify security settings. Refusing to start until this is fixed. I have .htaccess in cgi-bin with the following: <Files upsset.cgi> deny from all allow from 127.0.0.1 </Files>

I do a bunch of "kindness of strangers" hosting in my basement and my three kVA apc unit died recently. In looking around, it looked like Belkin was a reasonable low-end replacement for a few machines. Then I read this mailing list after I purchased one and was gifted another. It looks like people don't like Belkin. ;-) So the question is what's a good UPS for running

Hello, I'm using nut to control a Belkin F6C1500-TW-RK ups (vendor ID 050d, product ID 0751). I'm using the belkin driver and a serial connection for communications. The host computer is running Debian. I have things configured such that both my computer and the ups shut off when the battery level reaches a critical level, and everything seems to work fine up to this point. My problem

Hello, I'm using nut to control a Belkin F6C1500-TW-RK ups (vendor ID 050d, product ID 0751). I'm using the belkin driver and a serial connection for communications. The host computer is running Debian. I have things configured such that both my computer and the ups shut off when the battery level reaches a critical level, and everything seems to work fine up to this point. My problem

All, I have a fairly old Compaq R3000h which is overdue for new batteries. Before I go and splash out a few hundred francs, I'd just need a quick sanity check - when I disconnect the power (UPS under load), it cuts out pretty much right away, so the batteries are flat (even though the charge indicator says full). When I reconnect the power, the surge triggers a 16A mains fuse. This sounds

hi all, I'm facing a problem with a brand new installation on fedora 9. packages were updated right after the installation, so the samba packages are of the latest available version (3.2.0-17.fc9). at the first run were created all the tree of tdb files under /var/lib/samba. now I create a new user: [root@barbara Scrivania]# smbpasswd -a barbara New SMB password: Retype new SMB password:

This will sound a bit odd. I have a current server running with a UPS. I'm in the process of replacing that server with another and obviously want Nut to monitor the new server. The new/old servers are in different locations, so I don't have access to the UPS while configuring the replacement server. I think I have the config ok, but what errors would you expect to see? Typically I'm

Please, I need help in the part stable from R. I can?t plot the distribution function of a stable law. I obtained bad results. But the density function is OK. How can I do it? Sorry, I?m Brazilian and my english isn?t good... Thanks, Barbara Patricia Olbermann Instituto de Matem?tica Universidade Federal do Rio Grande do Sul - Brasil barbara at athena.mat.ufrgs.br

I'm sure I'm missing something, but I can't seem to get NUT working on FreeBSD. bryce at tahiti[/usr/local/etc/nut]>cat ups.conf [belkin] driver = usbhid-ups port = auto vendorid = 050d #productid = 0751 bryce at tahiti[/usr/local/etc/nut]>s /usr/local/libexec/nut/usbhid-ups -DDDDD -a belkin Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31

Hi Every one, I have a dataframe "class" with "name", "sex", "age", "height", "Weight". if i caluclate summary statistics with the below code numSummary(class[,c("Height", "Weight")], groups=class$Name, statistics=c("mean", "sd", "quantiles"), quantiles=c(0, .25,.5,.75,1)) iam getting

Hello to all, I still have this doubt. I'd like to colour the different labels of my dendrogram each one with a different colour. How can I do? I guess I could do using *edgetext* and then *t.col* or* lab.col* but I don't know how to add edgetext to my dendrogram. Can you help me please? Example: require(graphics); require(utils) hc <- hclust(dist(USArrests), "ave") (dend1

I have checked in a cleaned-up version of patch #302111 (Belkin support) into CVS. See cvs diff -uN -r before_PSE_2 -r after_PSE_2 to check the difference. Here is the CHANGES entry: Tue Sep 13 20:50:14 UTC 2005 / Peter Selinger <selinger@users.sourceforge.net> - newhidups: added Belkin support. Also added some new variables and instant commands (some of these were already used by

The fix is now in R-devel, 75386. I have not ported to R-patched, because the fix breaks two packages which are working around this bug (and to my knowledge without having reported it before). So thanks again for the report! Best Tomas On 08/16/2018 10:06 AM, Tomas Kalibera wrote: > Dear Barbara, > > thank you for the report. This is something to be fixed in R - I am > now

Hello, I am having trouble getting data ranges to work correctly. I am using the following command to load the db: index << {:title => row[7].to_i, :date => Date.strptime(row[3], ''%Y-%m-%d''), :page_id => row[5].to_i, :page => row[6].to_i, :content_type => row[1].to_i,

But runs normally if started. On a rpi4 running an uptodate raspbian buster, how do I set it to auto start at boot time? Thanks. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D.

Good Morning I am looking to download the Samba 3.0.23d binary for Solaris. When I go to the area that is set up for binaries, there is nothing under the Sparc folder. Is there another place I can get the binary? Thanks in advance for your help. Barb Fair Lockheed Martin Valley Forge, PA 610-531-5442