My Belking is no longer responding to the megatec driver. I get * Starting UPS drivers ... Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools - Megatec protocol driver 1.5 (2.0.5) Carlos Rodrigues (c) 2003-2006 Megatec protocol UPS not detected. Driver failed to start (exit status=1) * Failed to start UPS drivers! Thank you, Barbara Smith -- Using Opera's revolutionary e-mail client: http://www.opera.com/m2/
On 5/31/07, Barb Smith <mystified at satx.rr.com> wrote:> My Belking is no longer responding to the megatec driver. I get * > Starting UPS drivers ... > Network UPS Tools - UPS driver controller 2.0.5 > Network UPS Tools - Megatec protocol driver 1.5 (2.0.5) > Carlos Rodrigues (c) 2003-2006 > > Megatec protocol UPS not detected. > Driver failed to start (exit status=1) > * Failed to start UPS drivers!Ok, so what changed? Did you do anything, has the USB cable become disconnected, etc? -- Please keep list traffic on the list. Rob MacGregor Whoever fights monsters should see to it that in the process he doesn't become a monster. Friedrich Nietzsche
On 5/31/07, Barb Smith <mystified at satx.rr.com> wrote:> I use a serial port. The only thing that changed was that I emerged a > bunch of programs (I use Gentoo).Keep the traffic on the list. Ok, so, is that serial cable still connected and what "bunch" of programs? -- Please keep list traffic on the list. Rob MacGregor Whoever fights monsters should see to it that in the process he doesn't become a monster. Friedrich Nietzsche