similar to: Fun with TrippLite

Hi Charles and Jonathan, I am going through my over 300 unread NUT messages, and I just discovered this one from mid-December. At the time, I was trying to clean up the tripplite subdriver of newhidups, but never got the information I needed. I have enabled this driver now, but it is marked "experimental". The driver is still incomplete, in the sense that there are many unmapped device

Hi Jonathan and Charles, yes, the Tripp-Lite HID subdriver was under development. I started it based on the debug output posted by somebody on this list a few weeks ago, but then I either didn't get the information I needed, or got too busy to act on it. That driver is still incomplete, in the sense that there are many unmapped device variables. Jonathan, if you run this driver, could you

These patches allow this device to function in nut.. diff --git a/trunk/drivers/tripplite-hid.c b/new/drivers/tripplite-hid.c index c36da98..dddd13c 100644 --- a/trunk/drivers/tripplite-hid.c +++ b/new/drivers/tripplite-hid.c @@ -71,6 +71,8 @@ static usb_device_id_t tripplite_usb_device_table[] = { { USB_DEVICE(TRIPPLITE_VENDORID, 0x2005), battery_scale_0dot1 }, /* e.g. TrippLite

I have just compiled and installed nut-2.4.1 and I get the following errors when I try it: There is no difference if I run it as root or normal user. Any help would be appreciated. # usbhid-ups -DDD -a SMART1000LCD Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 debug level is '3' upsdrv_initups... Checking device (1D6B/0002) (001/001) libusb

Hi, With recent revision, it's impossible to get upsdrvctl started: [root at teevee nut]# /usr/local/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.3.0-1352 Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.3.0-1352) Warning: This is an experimental driver. Some features may not function correctly. Using subdriver: TrippLite HID 0.2 (experimental)

https://bugzilla.mindrot.org/show_bug.cgi?id=2297 Bug ID: 2297 Summary: EDD25519 Signature verification failed on Solaris Product: Portable OpenSSH Version: 6.7p1 Hardware: amd64 OS: Solaris Status: NEW Severity: major Priority: P5 Component: sshd Assignee: unassigned-bugs at

Hello everyone, Once again I'm trying to set up our Samba server to operate as a PDC, now that I've verified that I have a clean install of the Samba 3 software. However there are some difficulties with this. On my client machine when I try to set the domain name in the system control panel, I get an error message saying that the domain could not be contacted. I've set up my

Hi, I was wondering if Tripp lite SMART1000LCD is working in nut or what code I should change to get it to work. I saw some older posts about this model and the OMNI1000 LCD but the model I have has a different product ID, 2007 vs. 2005: Device descriptor: VID:09ae, PID:2007 Device release:0x10, USB release:0x110 Descriptor Length:18, Type:1 Device Class:0, Subclass:0, Protocol:0, Num

At the company I work for, we are using many TrippLite OMNI900LCD UPSs and are having difficulty setting the lower transfer threshold voltage. On our other model, the Eaton MGE-3S550, this can be set using upsrw to set the input.transfer.lowsetting, but on the Omni900, this option is not available. In our testing, it defaults to ~95v but we want to set it to 84v. More info: - OS = OpenSuse 13.1 -

Hello, Concerning my problem with not being able to connect to our domain with our Samba clients, there is a further piece of evidence in my samba.log, and I'm hoping that someone who is more experienced in dealing with WINS and domains can clarify the nature of these messages from the log: sync_with_dmb: Initiating sync with domain master browser PLEIADES<20> at IP

https://bugzilla.mindrot.org/show_bug.cgi?id=1457 Summary: X11 Forwarding doesn't work anymore on a solaris 10 host where ipv6 has not been enabled Classification: Unclassified Product: Portable OpenSSH Version: 4.9p1

Samba colleagues, I promise to limit my postings to this list to one message per day from now on, and to keep my messages focussed on very specific technical issues. I think I have gotten over my initial panic at the weirdly broken Samba installation and am now in a troubleshooting mode. The drama of all my Samba 3 difficulties now seems to be due to a faulty Samba installation. Symptoms

https://bugzilla.mindrot.org/show_bug.cgi?id=2271 Bug ID: 2271 Summary: Regression test #89 "fuzz Ed25519 sig" fails under Solaris Product: Portable OpenSSH Version: 6.6p1 Hardware: All OS: Solaris Status: NEW Severity: normal Priority: P5 Component:

Hello, I'm new to the list, new to NUT, but not new to Unix-likes. I could use some help getting NUT to talk to my Tripp Lite G1000U. Searching Google for "Tripp Lite G1000U" returns exactly two hits at this writing, so that may not be a good sign. ;-) It may just be rebranded for sale through this source (Costco). Externally, the G1000U looks much like the SMART1000LCD: an amber

Just installed version 2.2.1 and have the same problem reported in this chain. I have Mandriva Linux 2008.1 with a Tripplite USB 500 no break. When I start the upsdrvctl I get the "Startup timer elapsed, continuing..." message and then a upsd can't connect error. I copied the file usbhid-ups from version 2.2.0 from another Mandriva system and everything works fine now. Its not

https://bugzilla.mindrot.org/show_bug.cgi?id=1739 Summary: getcwd does not support size zero argument on Solaris Product: Portable OpenSSH Version: 5.4p1 Platform: Sparc OS/Version: Solaris Status: NEW Severity: normal Priority: P2 Component: sshd AssignedTo: unassigned-bugs at mindrot.org

i am currently running version 4.2.0pre1-GIT-e6f79b9. Don't remember how i got this installed, but i wanted to know if i can downgrade this version to a stable version ? My setup of samba is AD DC. thanks jef

Hello, I'm having some difficulty trying to join a WinXP client to our Samba domain. When I try to join the client to the domain and I submit the computer name and the domain name in the computer identification control panel, I'm prompted for the root user and password on the server, so I enter root and the root password on our Samba server. I then get a message saying that it

Dear R-help list, I?m using the mgcv package to plot predictions based on the gam function. I predict the chance of being a (frequent) participant at theater plays vs. not being a participant by age. Because my outcome variable is dichotomous, I use the binomial family with logit link function. Dataset in attachment, code to read it in R: data <- read.spss("pas_r.sav") attach(data)

I''m using Hieraki to do some documentation for RubyGems. So far I''m lovin'' it. But I have a question. I currently have three books on the site. It seems that the chapter numbers continue from one book to the next. For example, the first book has 7 chapters (numbered 1-7). The second book has three chapters, but they are numbered (8-10) rather than the (1-3) I