similar to: Unsupported UPS Orvaldi 520PL?

hi, i've bought a 750VA orvaldi ups http://en.orvaldi.com/index.php/en/product_catalog/product_view/11/162 which holds my hardware (wifi router, cable modem, quad-core with raid and lcd monitor) for ~15 minutes. pretty nice result for a cheap (~57 euro) home ups. in fact, the vendor software for linux is very old (e.g. requires ancient redhat with qt2), requires db9 port while shipped

Hi Pawel, 2011/7/26 Pawel Sikora <pluto at agmk.net> > Hi, > > i have an orvaldi ups > http://en.orvaldi.com/index.php/en/product_catalog/product_view/11/162 > and it works fine with blazer_usb driver. could you please add a new udev > rule? > > # ORVALDI 750/900SP - blazer_usb > ATTR{idVendor}=="0665", ATTR{idProduct}=="5161",

Hi Pawel, 2011/7/26 Pawel Sikora <pluto at agmk.net> > On Tuesday 26 of July 2011 14:33:15 you wrote: > > Hi Pawel, > > > > 2011/7/26 Pawel Sikora <pluto at agmk.net> > > > > > Hi, > > > > > > i have an orvaldi ups > > > http://en.orvaldi.com/index.php/en/product_catalog/product_view/11/162 > > > and it works

Hi All, i'm running blazer_usb on my home orvaldi ups and i'm observing in dmesg one, two or three segafults of blazer_usb per day and notifications about broken/re-established communication like this: blazer_usb[2985]: Communications with UPS lost: status read failed! blazer_usb[2985]: Communications with UPS re-established today i've started ups service again with attached (c)gdb

Hi, i've got similar problem with an OVISLINK 1000VA UPS on Debian. I've tried to connect with it using different drivers and this is what I get with each of them: [UPS] driver = blazer_usb vendorid = 0001 productid = 0000 port = auto subdriver = phoenix sweethome:~# /lib/nut/blazer_usb -a UPS -u root -DDD Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4) 0.000000

On 10/30/2017 03:19 PM, Alexa Catalin wrote: > System: Cenots Linux 6.9 > Application: nut-2.7.5-0.20170613gitb1314c6? [with usb 0.1 from distro] > Device:??Mustek PowerMust 1060 LCD > Comunication log file: dump.txt > > We are looking at the possibility of successful communicating with > this device UPS?Mustek PowerMust 1060 LCD. > > PS: wolfy on the list gives me

System: Cenots Linux 6.9 Application: nut-2.7.5-0.20170613gitb1314c6 [with usb 0.1 from distro] Device: Mustek PowerMust 1060 LCD Comunication log file: dump.txt We are looking at the possibility of successful communicating with this device UPS Mustek PowerMust 1060 LCD. PS: wolfy on the list gives me assistance and i can install any new compiled nut version from sources. Thanks, Catalin.

Hello! I can't get my UPS to get detected. I have tried to search the internet for several hours. I have a Mustek Powermust 1400 USB that has both a USB and serial port. OS: openSUSE 20151209 (x86_64) VERSION = 20151209 CODENAME = Tumbleweed Kernel: 4.2.1-1-desktop Nut: nut-2.7.3-1.5.x86_64 installed with zypper dmesg |grep usb [94414.680765] usb 1-1.1: new low-speed USB device number 4

Hello guys, Please help me to resolve the issue. I bought 'SVEN Power Pro+ 500 USB' UPS few days ago and tried to setup NUT 2.6.0 to work with it. blazer_ups driver doesn't recognize the UPS :( The Manufacturer provides 'PowerD' software for linux with installation instractions on a CD (see example below). --------===------- Welcom to PowerManager System!

Hi all, can anybody sugggest a proper solution to the problem described here: http://nut-upsuser.alioth.debian.narkive.com/wIMnftV0/installing-nut-for- powerwalker-vi-1500-lcd Righet now I am trying to make it go and running on version: root at raspberrypi:/home/pi/deb# apt-cache policy nut nut: Installed: 2.7.2-4 Candidate: 2.7.2-4 Version table: *** 2.7.2-4 0 500

Hello i need your help regarding the following issue : i have a hero touch ups from infosec. it is connected via USB to a raspberry pi 3. i?ve configure ups.conf file as below [HERO] driver = blazer_usb vendorid = 0665 productid = 5161 either with port = auto or port = /dev/hidraw0 or port = /dev/ttySo the connection never works i get the

Hi to everyone! I'm posting here after digging around the nut-upsuser and nut-upsdev mailing list, hoping I didn't miss something important. I'm trying to make my ups working with nut: it's a Tecnoware ERA LCD 0.85 which uses the so-hated UPSilon 2000 software to connect via usb. Personally I checked and seems that this junk software only works from windows, I'm trying to

> We need to make sure this isn't something vm-related I suspect that this is definitely vm related now. I've tried Ubuntu server 10.10 as you suggested, and also Debian wheezy and both do the same thing. I saw in another thread that the author of the .vib of nut for ESXi is on this mailer - hopefully he can shed some light on what's happening. I would even be happy if I can

Hello. I recently upgraded from Ubuntu Maverick to Natty and hence upgraded nut from 2.4.3-1ubuntu5 to 2.6.0-1ubuntu3. My Sven PowerPro+ 1000 UPS ( http://en.sven.ru/catalog/ups/power_pro_plus_1000.htm ) worked fine with the previous version, using megatec_usb driver, but doesn't work with the current version, since megatec_usb is no longer available. Here is the output from blazer_usb.

Hello, windows10pro version 1511 os build 10586.29 nut 2.6.5-6 windows binary package device ups: poweron vs 950 when I do testing shutdown it does not shutdown. Thank's. driver debug output: C:\Program Files (x86)\NUT\bin>blazer_usb -DD -a myups Network UPS Tools - Megatec/Q1 protocol USB driver 0.10 (Windows-v2.6.5-5-7-g72f380c) 0.000000 debug level is '2' 0.000000

@fsp Please forward to development, manufacturing and quality management department: Model EP1000(PPF6000/100), 431107300095, 4711140480534, Art-Nr. 8296861, 70539, 14Z00000, 35-0200116-01G @nut-users http://www.networkupstools.org/ 2.4.3 debian stable, 2.6.2 upstream, linux 2.6.38-debian-bpo # /usr/local/src/nut-2.6.2/drivers/blazer_usb -u root -DDDDD -a ups Network UPS Tools - Megatec/Q1

No progress has been made: cable is UPS - PC 6 - 3 7 - 5 9 - 2 for ./blazer_ser -DDDDD -a infosec 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyS1" 0.000323 debug level is '5' 0.103068 send_to_all: SETINFO device.type "ups" 0.103104 send_to_all: SETINFO driver.version "2.7.3" 0.103118 send_to_all: SETINFO

Hi to all and happy new year! I'm writing here as I'm trying to get nut supporting the UPS in the subject; I didn't check well before buying and nowI discovered this is kinda bad hardware (it doesn't have a valid USB id, it just reports 0000:0001 and linux support doesn't really work as they stated), but before changing it I wanted to try to find a solution to get it work with

Hi all! Maybe possible adds something in megatec_usb driver for normal working with ippon 2000? This is output for drivers megatec_usb and blazer_usb: =========================================================== gate# /usr/local/libexec/nut/megatec_usb -DDDD -a IPPON Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '4' Checking

Hi all, I've bought UPS FSP EP 850 because I have similar UPS, FSP EP 1000. It is working on my other server with with Fedora 14, kernel 2.6.35.14-106.fc14.x86_64 and installed nut-2.6.2-1. My new UPS is detected by kernel (see below lsusb output) and is partially detected by blazer_usb driver also. But it doesn't communicate with driver (see below blazer_usb output). I run all