similar to: Getting a Plexus 500VA to work with NUT

Hi I Bought a cheap Plexus 800VA UPS from ebuyer : http://www.ebuyer.com/product/240319 to use with my Netgear ReadyNAS duo. Initial version of NUT was very old and NAS didn't detect it although in the NAS log it said "UPS Disconnected". Syslog did send the following : Jan 25 12:46:36 nas-27lfc kernel: usb 1-1: new low speed USB device using uhci_hcd and address 2 Jan 25 12:46:37

Hi, i've got similar problem with an OVISLINK 1000VA UPS on Debian. I've tried to connect with it using different drivers and this is what I get with each of them: [UPS] driver = blazer_usb vendorid = 0001 productid = 0000 port = auto subdriver = phoenix sweethome:~# /lib/nut/blazer_usb -a UPS -u root -DDD Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4) 0.000000

Hi, Has anyone managed to get a Plexus UPS talking to their NAS. I've followed the excellent instructions here http://forum.qnap.com/viewtopic.php?f=182 <http://forum.qnap.com/viewtopic.php?f=182&t=35970&start=0> &t=35970&start=0 but I'm not there yet. When I manually start upsdrvctl without the UPS plugged in I get [~] # /usr/bin/upsdrvctl start Network UPS

On Nov 12, 2014, at 2:49 AM, Klint Gore <kgore4 at une.edu.au> wrote: > Can someone give me a push in the right direction with this? I?m trying to get an upsonic IRT1000 to work on ubuntu 14.04lts using the usb connection. The most likely drivers (blazer_usb and usbhid-ups) don?t seem to recognize it or I?ve got the configuration parameters wrong. I?ve got no idea what driver it

On Jan 2, 2015, at 1:07 PM, Mike Raath <raathm at gmail.com> wrote: > I built a single VM to monitor the UPS (Ubuntu Server 14.04 i386) and installed NUT on the box from the apt packages. I set it up as per the previous box with the blazer_usb driver and all goes well, for a while. Initially, the UPS reports correctly via upsc, but after a while I get the "Data stale" error,

UPS: PowerWalker VFI 3000RT LCD CentOS 6.5, nut installed from RPM package: nut-2.6.5-2.el6.x86_64 nut-client-2.6.5-2.el6.x86_64 Driver: blazer_usb Problem description: USB device "loops" when starting blazer_usb. USB device permissions are ok. Receives some information. Error messages: "failed to claim USB device: could not claim interface 0: Device or resource busy"

-----Original Message----- >From: Charles Lepple [mailto:clepple at gmail.com] >Sent: Thursday, 13 November 2014 12:12 AM > >I am surprised that the blazer_usb configuration didn't work. If you leave off >the matching options, does this find the UPS? > >[upsonicRT1000] > driver=blazer_usb ## or nutdrv_qx > port=auto > desc="UPSonic RT1000"

Hi everybody, following UPS is successfuly tested. Model: FSP Champ Tower 1k https://www.fsp-europe.com/CS/champ-tower-series-1k2k3k/ lsusb: Bus 002 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial ups.conf: [powerpal]     driver = blazer_usb     port = /dev/hidraw0 Mode = standalone Distro = CentOS 8 What I did to get UPS communicate. In terminal run as root: ln -s

Hi Charles, and thanks for your suggestion. I tried the nutdrv_qx and moved the rules file like you said, and re-attached the USB. It picked up to begin with, but within 10 minutes it lost the device again. $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.1 Network UPS Tools - Generic Q* USB/Serial driver 0.01 (2.7.1) USB communication driver 0.32 Using protocol: Megatec

[Please subscribe to the mailing list: http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser ] On Nov 28, 2013, at 4:10 PM, Danijel ?ili wrote: > Since the provided drivers come with absolutely no installation instructions, I turned to NUT. > > The compatibility list says "blazer_usb" should be used for PowerWalker's devices, so that's what I put in my

Hi, Sometime ago I asked the question about getting nut to run on my iMac as I was having trouble getting the USB driver to behave with OS X. The same driver under LINUX is fine. It was suggested that the better option might be to run nut on a Rasberry PI instead and monitor the nut daemon from the iMac. Well I have bought a Rasberry PI, I have other things planned for it. I have installed nut

On Mon, Dec 2, 2013 at 2:25 PM, Charles Lepple <clepple at gmail.com> wrote: > > [Please subscribe to the mailing list: http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser ] > > On Nov 28, 2013, at 4:10 PM, Danijel ?ili wrote: > > > Since the provided drivers come with absolutely no installation instructions, I turned to NUT. > > > > The

Syndome Era Series *upsc output* * *battery.charge: 100 battery.runtime: 1000 <-- not reported by UPS (guesstimate) battery.voltage: 13.60 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.type: ups driver.flag.novendor: enabled driver.name: blazer_usb driver.parameter.chargetime: 43200 driver.parameter.idleload: 30 driver.parameter.pollinterval: 5

Hi all, can anybody sugggest a proper solution to the problem described here: http://nut-upsuser.alioth.debian.narkive.com/wIMnftV0/installing-nut-for- powerwalker-vi-1500-lcd Righet now I am trying to make it go and running on version: root at raspberrypi:/home/pi/deb# apt-cache policy nut nut: Installed: 2.7.2-4 Candidate: 2.7.2-4 Version table: *** 2.7.2-4 0 500

CentOS Errata and Security Advisory 2018:1836 Important Upstream details at : https://access.redhat.com/errata/RHSA-2018:1836 The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 9c26560f7b175d6e1455a7b9edf9c56be74c06a98f91074a36c3944a51ea110e plexus-archiver-2.4.2-5.el7_5.noarch.rpm

Hi Pawel, 2011/7/26 Pawel Sikora <pluto at agmk.net> > On Tuesday 26 of July 2011 14:33:15 you wrote: > > Hi Pawel, > > > > 2011/7/26 Pawel Sikora <pluto at agmk.net> > > > > > Hi, > > > > > > i have an orvaldi ups > > > http://en.orvaldi.com/index.php/en/product_catalog/product_view/11/162 > > > and it works

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hello people. My name is Rub?n. Firts, excuse me for my bad english. I run Debian 6.0.6, kernel 2.6.32-5-amd64 in my machine. I bought a ISB Sola basic UPS, model Micro SR inet, with usb conection. I Configure the nut.conf file in standalone mode and I install de isbmex driver. The ups.conf: [ISB_sola-basic] driver = isbmex port = auto With de command upsdrvctl start the

Do your drivers/Makefile.am rules for the resulting new program specify dependencies to use similar to other USB-capable drivers? e.g. ```` blazer_usb_SOURCES = blazer.c blazer_usb.c $(LIBUSB_IMPL) usb-common.c blazer_usb_LDADD = $(LDADD_DRIVERS) $(LIBUSB_LIBS) -lm ```` Jim On Sat, Nov 2, 2024 at 2:30?AM William R. Elliot <bill at wreassoc.com> wrote: > Hello again all. > > I am