similar to: Again me :)

And sorry, I forgot to put log from messages, I always got this: Oct 30 21:06:25 optimus kernel: usb 5-1: usbfs: process 9808 (megatec_usb) did not claim interface 0 before use From: nut-tracker-bounces+vladimir=micovic.com at lists.alioth.debian.org [mailto:nut-tracker-bounces+vladimir=micovic.com at lists.alioth.debian.org] On Behalf Of Vladimir Micovic Sent: Saturday, October 30, 2010 8:00

On Jan 28, 2008 7:47 AM, Arnaud Quette <aquette at alioth.debian.org> wrote: > + * driver.list: add compatibility information for [...] > + - Oneac XAU models Here's an excerpt from my conversation with Jacob Schmier on the Oneac model numbers: "The model numbers you listed (ON700, ON1000, ON1500, ON2000) comprise the Universal-Mount ON Series family (circa 2005). Each

On Jan 2, 2012, at 10:51 AM, Vladimir Micovic wrote: >> Bus 003 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial > Unfortunately, this device ID is used by several different vendors. What does "lsusb -vvv -d 0665:5161" show? > Also, what OS and kernel are you using? (I thought certain kernels had USB-to-serial drivers for that chip.) > -- > Charles

Use the name from ups.conf in front of "@localhost". ?The re?sult is quite different ;) root at artu:~# upsc Elit at artu Init SSL without certificate database Error: Driver not connected > What if you try nutdrv_qx without specifying megatec? (It should > autodetect.) > ?Here is the result: ? root at artu:~# upsdrvctl start Network UPS Tools - UPS driver controller

Hi, With kernel 2.4.10, when I do $ mkdir foo; cd foo; rmdir ../foo; ls then ls becomes zombie. $ ps xau|grep ls liu 596 0.0 0.0 148 88 ? D 12:03 0:00 ls This does not happen with 2.4.10 on an ext2 filesystem, nor with 2.4.9/ext3. The command cd instead of ls is OK. Distribution is Slackware 8.0 and the kernels are stock ones. Liu

I found this page: https://01.org/linuxgraphics/downloads/2015q4-intel-graphics-stack-release I have an Intel NUC5C with "Intel HD" graphics and I'm trying to use CentOS 7.2 I downloaded the files suggested: cairo-1.14.4.tar.xz libva-1.6.2.tar.bz2 mesa-11.0.4.tar.xz intel-gpu-tools-1.13.tar.bz2 libva-intel-driver-1.6.2.tar.bz2 xf86-video-intel-2.99.917.tar.gz

Hello, I have Mustek Powermust 2000VA USB And installed latest nut. Problem is that I cannot get info from UPS: http://pastebin.com/BtpE2Be1 I got contact with UPS via blazer_usb driver http://pastebin.com/38BZteFC Ups.conf: http://pastebin.com/KwRrz5rf Upsd.conf: http://pastebin.com/i3jNHpVj Upsd.users: http://pastebin.com/TRJ5ahWR Lsusb: http://pastebin.com/WsEbkPqG Dmesg:

On 4/26/2015 1:54 PM, Tim Dunphy wrote: > Hey guys, > > > I'm trying to instal gd-devel onto a CentOS 7 host. > > --> Finished Dependency Resolution > Error: Package: gd-last-devel-2.1.1-2.el7.remi.x86_64 (remi) > Requires: libvpx-devel(x86-64) > You could try using --skip-broken to work around the problem > You could try running: rpm -Va

Hello, i try to setup NUT service to read/control my UPS but without success. Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD -u root start" i got: /Network UPS Tools - UPS driver controller 2.6.2/ / 0.000000/ /If you're not a NUT core developer, chances are that you're told to enable debugging/ /to see why a driver

Hello, windows10pro version 1511 os build 10586.29 nut 2.6.5-6 windows binary package device ups: poweron vs 950 when I do testing shutdown it does not shutdown. Thank's. driver debug output: C:\Program Files (x86)\NUT\bin>blazer_usb -DD -a myups Network UPS Tools - Megatec/Q1 protocol USB driver 0.10 (Windows-v2.6.5-5-7-g72f380c) 0.000000 debug level is '2' 0.000000

I'm running Ubuntu 14.04.1 with nut 2.7.1-1ubuntu1, using a Powerwalker/INNO TECH ups. It used to working fine, but lately blazer_usb just executes a few commands and then terminates with a "Got disconnected by another driver" message. Any suggestions? Example output from blazer_usb with loads of debug: # /lib/nut/blazer_usb -DDDDDDDDDDDDDDDDDDDDDD -a nasups Network UPS Tools -

Dears, I have centos 5.5 with kernel 2.6.18 UPS: Mustek PowerMust 2000VA USB I trying to setup monitoring for this ups, I connect ups with server via COM port and USB. But here is the problem (with megatec_usb): [root at optimus ups]# /sbin/upsdrvctl start Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb] Carlos

@fsp Please forward to development, manufacturing and quality management department: Model EP1000(PPF6000/100), 431107300095, 4711140480534, Art-Nr. 8296861, 70539, 14Z00000, 35-0200116-01G @nut-users http://www.networkupstools.org/ 2.4.3 debian stable, 2.6.2 upstream, linux 2.6.38-debian-bpo # /usr/local/src/nut-2.6.2/drivers/blazer_usb -u root -DDDDD -a ups Network UPS Tools - Megatec/Q1

Hello All, I tested our new UPS yesterday. I noticed that while the blazer_ups drivers support this device, the newer nutdrv_qx does not. I suppose that this should not be the case, as nutdrv_qx will replace blazer_ups(?). Versions: I installed Nut on Ubuntu 13.10 (64 bit) from the standard package (2.6.4-2.3ubuntu2), and I also installed from the source tarball (2.7.1), into a different

hi! When I turn on my pc everything works fine, but if I restart fails (I'm not sure if this is true at 100%)?(then, i can do 'sudo /etc/init.d/nut restart' and it works) But what is certain is that sometimes when start up the pc it works and sometimes fails, can be a problem with the start time (i have a fast ssd) and the initialization of the driver and the usb port? thanks! syslog:

> > hmm, apparently the UPS doesn't close the replies to our queries with > the expected CR and we (I) did not consider that case in nutdrv_qx -- > noted: > https://github.com/networkupstools/nut/issues/441 > > But blazer_usb, being less strict on the terminating CR of Q1 replies, > should work with your device. > > > root at artu:~# upsc Elit at artu > >

This is from a security discussion on one of the GNOME lists. Jim is one of the original X11 people, for what that's worth. I just thought I'd try to tempt some folks here into looking at doing ssh and X integration "right". Greg -- Portland, Oregon, USA. Please don't copy me on replies to the list. -------------- next part -------------- An embedded message was

Short description: when upsmon starts it logs this to /var/log/messages: Jul 11 12:35:55 sorcerer upsmon[23902]: Startup successful Jul 11 12:35:55 sorcerer upsmon[23902]: user monuser not found Near as I can tell upsd is running properly. Long description: Centos 5 system (x86_64), built nut 2.2.2 from stable source with ./configure --with-usb --with-user=nut --with-group-nut make

2009/8/28 Thomas Zulliger <Thomas.Zulliger at quiksilver.com.au> > Hi Arnaud > Hi Thomas, > I'm experiencing exactly the same problem > > DNS-323 fun_plug Fonz > nut 2.4.1-1.tgz > powerware 3105 > using BCMXCP_usb > > /mnt/HD_a2/packages # lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 002: ID 0592:0002 Powerware Corp. > Bus 001

Hello! I'm trying to use nut with a Ippon Smart Winner 3000 UPS (http://shop.key.ru/photo/items/45535.jpg) which looks like a custom-labeled OEM model of the megatec branch. I tried both the megatec_usb and the blazer_usb drivers for it, with a obvious config section: [ippon] driver = blazer_usb port = auto vendorid = 06da productid = 0003 desc = "Ippon Smart Winner 3000" If I