similar to: Nut compatibility list addition

Hi All, First time mailing here, I hope someone can help. We?re running a OpenStack Newton environment on top of CentOS-7.3, LibVirt and Qemu-KVM-EV. We are encountered an issue live migrating a VM between 2 hosts with different CPUs and LibVirt throws the following error: libvirtError: unsupported configuration: guest and host CPU are not compatible: Host CPU does not provide required features:

Greetings All, I'm new to the list and am not sure this is where to start. I have a recently purchased a CyberPower CP1350AVRLCD UPS. I would like to get this UPS up and running via it's USB interface on Ubuntu 8.10 x64. I have tried the available USB driver (usbhid-ups) and the drive was unable to identify the UPS. I have some old and outdated programming experience and would be

Hello. I have a computer running Redhat 7.2 and the Wine pacakge. This computer has no Windows partitions on it. From what I've read it's easier to get programs to run under Wine if you have a Windows partition. I really don't want one because it only has 4 gigs of hard drive space in the computer and I only use if for Linux. Has anybody tried to do this before? Any info would be

The following caused a hard-to-diagnose problem for a user of the survey package. Presumably this is a strange Unicode thing, but is there a convenient reference for how the collation order is determined? I am surprised that adding the same character to the end of two strings of the same length can change the sorting order. in en_US.utf8 locale > "1//"<"10/" [1]

I'd like to know if there's a way to non-destructively reverse L-R channels in an ogg vorbis file? I've been recording live classical sources, but until tonight haven't listened to them on anything with even approaching decent stereo separation. Well, you guessed it. Why the hell are the violins on the right and the brass on the left? Checked my equipment and sure enough, cable

I had been working on an essay of my experiences with various codecs for a bit, and when slashdot's post came up, I couldn't help but excerpt part of and post it up there. It got a lot of comments and moderation points, so it's given me some "animo" to fix it up and put the rest of it out there. I'm going to distribute this under an open content license. If anyone

Hi, Am I hitting some limit in match? Consider the following example: > tst<-seq(100,125,by=.2)%in%seq(0,800,by=.1) > sum(tst) [1] 76 > seq(100,125,by=.2) [1] 100.0 100.2 100.4 100.6 100.8 101.0 101.2 101.4 101.6 101.8 102.0 102.2 [13] 102.4 102.6 102.8 103.0 103.2 103.4 103.6 103.8 104.0 104.2 104.4 104.6 [25] 104.8 105.0 105.2 105.4 105.6 105.8 106.0 106.2 106.4 106.6 106.8

Hi, Am I hitting some limit in match? Consider the following example: > tst<-seq(100,125,by=.2)%in%seq(0,800,by=.1) > sum(tst) [1] 76 > seq(100,125,by=.2) [1] 100.0 100.2 100.4 100.6 100.8 101.0 101.2 101.4 101.6 101.8 102.0 102.2 [13] 102.4 102.6 102.8 103.0 103.2 103.4 103.6 103.8 104.0 104.2 104.4 104.6 [25] 104.8 105.0 105.2 105.4 105.6 105.8 106.0 106.2 106.4 106.6 106.8

Just wanted to report that I have successfully got a Dynex DX-800U UPS functioning with the newhidups driver. This UPS appears to be made by CyberPower Systems and I believe is the same as the CPS 800AVR. --------- # upsc dynex@localhost battery.charge: 66 battery.charge.low: 10 battery.charge.warning: 20 battery.runtime: 399 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 19.7

Hi folks, new to list... nut 2.7.2 on Ubuntu 16.04 with Cyberpowersystems CP1350PFCLCD. After performing upscmd cp1350 at localhost test.battery.start.quick the result was "Done and warning". I searched through syslog but could find no additional information. What is the warning? Battery charge was 100% before test was performed. Here's the full output from upsc after test:

All, I just had a power failure that caused me a little drama. This spurred me into trying to get NUT up on my cyberpower 1500 again. For about 6 months I tried to get it to work with the new power panel drive with no luck. Today I removed all the old files for NUT and installed the newest version I could find (2.4.3) and it works perfectly now with my UPS. Hopefully now I

Hi James, 2011/1/1 Among The Living <stinkysmellykid at gmail.com> > Hey there, > > After a few hours with tampering I got my UPS up and running. > > It's a "RocketFish 1025/1000va" (The model varies and is listed as > 1000va as well as 1025va). > > I got it working with the usbhid-ups driver, which I guess is a no > brainer :P. Just figured I'd

Hi, I have the following data and there is no binary operator contained, however, I still receive the error message when running unitrootTest function, could someone give me a guidance on it?? >readClipboard() [1] "245" "246" "261.5" "275.5" "307" "284.5" "289" "313.5" "323.75"

I'm using the image.plot() function (fields package), but I want to enlarge the characters of the legend (as they are too small to be read in a combined figure), but there is no way I can find a command to do this. I can enlarge the legend bar (with legend.witdh), axis character size (cex.axis) or the total legend size (legend.shrink), but not the character size of the legend characters

nut 2.7.2 linux 3.18.7 CyberPower CP1350PFCLCD The LCD shows the same for input and output, my multimeter also matches the input voltage. But nut is giving me different numbers. How do I debug this? input.voltage: 122.0 output.voltage: 138.0 I still need to check what it does on battery and what the other readings are. But the voltage stuck out at me.

Hi Michael, thanks for your feedback! I'm cc'ing the NUT users list for info. I've also added an entry for your device (Powerwalker Line Interactive VI 1400, using blazer_usb). Can you please send back an upsc output, and at least check for the shutdown behavior, if not already done: http://new.networkupstools.org/user-manual.html#Testing_shutdowns 2010/10/19 MichaelE <662435 at

2010/8/4 BESERIE Romain > Hi Arnaud, > bonjour Romain, I have bean searching desperately for months after a compatible driver > for my ups. And finally, it is on your compatibility list pages that I > found what I was looking for... in the "If your UPS isn't listed" part. > > it's a POWERCOM SKP-700A connected through usb. and it fully compatible > with

I just got NUT 2.0.1 running on my Debian system at home.? I have a new CPS UPS connected via USB.? Everything is working fine, except the UPS is showing a value of 120% charged.? Any idea what causes this?? Here's the upsc output for my UPS: battery.charge: 120 battery.charge.low: 10 battery.charge.warning: 20 battery.runtime: 1320 battery.runtime.low: 300 battery.type: PbAcid

I was getting: "Can't claim USB device [0764:0501]: could not detach kernel driver from interface 0: Operation not permitted" so I manually installed the udev rules the source (I installed the Gentoo ebuild). I am now getting: # upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 Using

UNITEK Alpha650ipF and Alpha650ipE Build NUT v2.6.4 from sources http://www.networkupstools.org/source/2.6/nut-2.6.4.tar.gz System: RedHat Linux RHEL4 Kernel: 2.6.9-42.0.10.EL (upsc) command output : battery.charge: 100 battery.voltage: 14.30 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.mfr: UNITEK device.model: Alph650ipF device.type: ups