similar to: Tripp Lite SmartOnline 3U

Hi, I'm running the latest stable nut (2.4.3). It doesn't appear to provide support for the Tripp Lite SmartOnline SU1000XLA. [sups] driver = usbhid-ups port = auto vendorid = 09ae productid = 4004 4337# upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 Using subdriver:

Hi Matt, first, note that Russell (Kroll) is retired for long. Support request should go to the NUT Users list, which needs subscription. 2010/6/23 matt <matt at mattevans.org> > Experts, > > I have gotten nut to work this evening, with usbhid-ups, and a small > addition to udev, on my new TrippLite SmartOnline model. I am on Ubuntu > 10.04. This is the 2U rackmount 800W

Re: "Does it work well with NUT?" Assuming it is the SU5000RT4UHV, the similar units I've tried seemed to work fine. For reference, the SU5000RT4UHV should be a 4004 USB protocol. ________________________________ From: David Zomaya Sent: Wednesday, March 25, 2020 5:21 PM To: Lee Damon; nut-upsuser Mailing List Subject: Re: [EXTERNAL] [Nut-upsuser] thoughts on tripp lite Smart

To all, I attempted to configure the UPS tools for the Tripp-Lite SmartOnline 1500VA 2U rackmount UPS. I followed the instructions from the 'upsdrvctl start' output and posted the diagnostic information below. Is my UPS using an unknown product ID as reported? From the mailing list archive, I have found another posting for the same UPS with device model '09AE/4003', whereas

We're looking at replacing some old APC SmartUPS 5000s with something that has USB so NUT can more easily talk with it (and yes, I've tried USB-RS232 adapters and every one I tried started kicking out errors within a few hours). One of the bids we have is for a "Tripp Lite UPS Smart Online 5000VA 4500W Rackmount 5kVA 200V/240V" as the potential replacement unit. I have no

Hi, I kludged support for the TrippLite SU2200XLA into nut-2.4.3 as follows: --- ./drivers/tripplite-hid.c.0 2010-03-03 15:53:20.000000000 -0500 +++ ./drivers/tripplite-hid.c 2010-03-03 15:53:40.000000000 -0500 @@ -81,6 +81,8 @@ { USB_DEVICE(TRIPPLITE_VENDORID, 0x4002), battery_scale_1dot0 }, /* e.g. TrippLite SmartOnline SU1500RTXL2ua */ {

The 2.0.2+ tripplitesu drivers do not recognize SmartOnLine SU2200XL and possibly other SmartOnLine UPSes. Here is a one-line fix. Lee --- ../nut-2.0.2/drivers/tripplitesu.c Thu Jan 27 08:33:21 2005 +++ drivers/tripplitesu.c Sat Oct 1 13:38:51 2005 @@ -227,7 +227,7 @@ buffer[4] = '\0'; if (!strcmp(buffer, "~00D")) { - if (ser_get_buf_len(upsfd, buffer, 4, 3, 0) <=

Hello, We have a Tripplite SMART1500RMXL2U and nut-2.2.0-6.el5 installed on Centos 5.3. I've been unsuccessful on getting upsmon to work. usdrvctl seems to start despite some warnings/errors: # upsdrvctl start smart1500 Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.0-) Warning: This is an experimental driver. Some

Hello list! I can't seem to get this running via RS232 monitoring; I've been told that NUT won't support serial connections, and find this hard to verify. Does anyone else have this running on the SU10KRT3U via RS232? If so, what driver did you use? I'm getting no satisfaction from the "tripplite" driver; upon upsdrvctl start, I get "Failed to find UPS - giving

Hi, I am considering purchasing a UPS and want one that I can query from bash scripts. I would assume nut to be the best tool to allow this. I have been directed to a Socomec RT 3000VA UPS. I have previously had MGE Pulsars and interfaced to them with nut's mge-utalk and mge-shut drivers with reasonable success, apart from the odd data stale error. These Socomec units have RS-232

Greetings, I have a Tripp-Lite SU6000RT4U unit connected via USB and RS-232. # tripplitesu -DD -u root -a tl6000 Unable to detect Tripp Lite SmartOnline UPS on port /dev/ttyS0 # tripplite -DD -u root -a tl6000 Failed to find UPS - giving up... # newhidups -DD -u root -a tl6000 Checking device (09AE/4002) (001/003) - VendorID: 09ae - ProductID: 4002 - Manufacturer: Tripp Lite - Product: TRIPP

I'm obviously biased but I like Tripp Lite stuff. I try to pitch in and help with Network UPS Tools issues related to Tripp Lite when I can too (albeit the developers and users on this list are usually more helpful than me). Just to confirm, it sounds like you are looking at the SU5000RT4UHV, correct?

Dear Mr Peter Dalgaard and Mr Dieter Menne, I sincerely thank you for helping me out with my problem. The thing is taht I already have calculated SENS = Gg / (Gg + Bg) = 89.97% and SPEC = Bb / (Bb + Gb) = 74.38%. Now I have values of SENS and SPEC, which are absolute in nature. My question was how do I interpret these absolue values. How does these values help me to find out wheher my model is

Hi Hi I am working on credit scoring model using logistic regression. I havd main sample of 42500 clentes and based on their status as regards to defaulted / non - defaulted, I have genereted the probability of default. I have a hold out sample of 5000 clients. I have calculated (1) No of correctly classified goods Gg, (2) No of correcly classified Bads Bg and also (3) number of wrongly

On 3/25/20 3:31 PM, David Zomaya wrote: > Just to confirm, it sounds like you are looking at the SU5000RT4UHV, > correct? > > https://www.tripplite.com/smartonline-208-240v-5kva-4.5kw-double-conversion-ups-4u-rack-tower-extended-run-snmpwebcard-option-usb-db9-serial~SU5000RT4UHV > That does seem to be the one they are quoting, yes. thanks, nomad

Thanks. I haven't used that unit specifically with Network UPS Tools, but have used similar (from a protocol perspective) units. I'm working remotely for a while, but on the off chance I get into the position to connect a unit via USB, what Operating System are you using? If the opportunity arises, I can try to set up a basic test. Thank you, David Zomaya Business/Quality Analyst-

I've just set up a CyberPower Value 2200E-GP on a system running Lucid AMD64, with the current NUT package via apt-get, and it seems to be working fine for me with the usbhid-ups driver, so I guess it can go in the HCL? I'm using the system to host several virtual servers under KVM, and to make things simple I set it up to hibernate rather than shutdown, that way all the guest OS

http://bugzilla.mindrot.org/show_bug.cgi?id=1161 Summary: scp -r fails Product: Portable OpenSSH Version: 4.3p1 Platform: ix86 OS/Version: Cygwin on NT/2k Status: NEW Severity: normal Priority: P2 Component: scp AssignedTo: bitbucket at mindrot.org ReportedBy: gregt at post.pl This is on

Citeren Arjen de Korte <adkorte-guest at alioth.debian.org>: > Author: adkorte-guest > Date: Sun Nov 16 13:00:30 2008 > New Revision: 1560 > > Log: > Generated by libtool and should not be versioned. > > Modified: > trunk/ (props changed) Right, that didn't work out quite the way I intended. Can someone please set the svn:ignore property on

On 13. Aug 2020, at 11.29, Timo Sirainen <timo at sirainen.com> wrote: > > On 13. Aug 2020, at 11.00, Arjen de Korte <build+dovecot at de-korte.org> wrote: >> >> I allow users to run 'doveadm' for mailbox maintenance (to expunge mail for instance). Since the upgrade to 2.3.11.3, this no longer works and results in the following error message: >>