similar to: smart1050slt by tripp lite

Original Message >I have 2 SmartUOS1050SLT's that apparently protocol 3004, has there >been >any progress on getting these units supported under nut? I am running >version 2.4.1, and get the following output when starting the driver. >#lsusb >Bus 005 Device 002: ID 09ae:0001 Tripp Lite ># upsdrvctl -DDDD start >Network UPS Tools - UPS driver controller 2.4.1

Well, I have good news and bad news. I have a Tripp Lite SmartPro UPS attached to a Linux server running Ubuntu 5.10, and I'm running the just-released nut 2.0.3. I had error -71 from the UPS, which Charles Lepple correctly called out as a likely cable problem (thank you, Charles.) The cable provided with the UPS by Tripp Lite was just plain bad. Not too long, mind you- defective. I

Windows 7 Pro x64 Tripp-lite SMART1050SLT (USBHID) NUT 2.6.4-5 Driver is malfunctioning if the UPS goes on-battery (quick test or otherwise). usbhid-ups - libusb_get_report: libusb0-dll:err [control_msg] sending control message failed, win error: A device attached to the system is not functioning. (from event log) libusb_get_interrupt: libusb0-dll:err [_usb_reap_async] reaping request

I have a new SMART1050SLT Tripp Lite UPS that both tripplite and tripplitesu drivers hate. Both simply time out with a "can't find" message. Does anyone know about the SmartPro series?

Good afternoon, I'm trying without much success to monitor a Tripp Lite OMNIVS1500XL using NUT. I checked the compatibility list and saw that this UPS is supported by tripplite_usb. The system is running Debian Stable, but I've downloaded NUT 2.0.3 and compiled from source since the packaged 2.0.1 doesn't include tripplite_usb. I compiled --with-user=nut. My first attempt at

Hello. I'm new to nut and don't know if I've missed something in setting it up or if my ups isn't quite supported. I'm using these: - svn version of nut (downloaded on 9/13/06) - a tripp lite SMART2200RMXL2U - debian sarge with 2.6.8 kernel - the tripplite_usb driver (newhidups says my ups is not supported) I figured out how to get the device perms correct.

Hi, I'm running Fedora Core 6 and need to monitor a Tripp Lite SMART2200RMXL2U. I've loaded the nut-2.0.3-2.1 RPM. The UPS is connected via the provided USB cable, and that much appears to work: # dmesg | grep -i tripp hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2 # lspci | grep -i usb 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM

I was cleaning up some digital detritus when I ran across an old SVN branch for the proprietary Tripp Lite 3004 USB protocol (the non-PDC variety). It looks very similar to the binary 3005 protocol, which has been added to NUT, but I'd like to have someone sanity-check things before we claim compatibility. Any volunteers? I'm not sure what models this covers, except maybe the

Hello, I am trying to get a SMART500RT1U working on CentOS and just receiving the following message when attempting to start the driver: Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.5) Warning: This is an experimental driver. Some features may not function correctly. Detected a UPS: Tripp Lite /TRIPP LITE SMART500RT1U Unknown input voltage range: 0x02 Unknown number of

On Mar 6, 2015, at 12:51 PM, Eric Cobb <Eric_Cobb at tripplite.com> wrote: > Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.5) > Warning: This is an experimental driver. > Some features may not function correctly. > > Detected a UPS: Tripp Lite /TRIPP LITE SMART500RT1U > Unknown input voltage range: 0x02 > Unknown number of switchable load banks:

I have several Tripplite SU2200RMXL2U and SU3000RM2U units that I would like to monitor using Nut. I have tried to attach to the units using a serial cable with the tripplite and tripplitesu drivers with no success. The drivers simply seem to not recognize the UPS. I then tried using the tripplite_usb driver with the usb cable. It definitely sees the UPS but I am getting errors which told me

I'm trying to set up a single host to monitor the state of several UPS in my data center. I have a mix of several APC and Tripp-Lite in production. The former are great, the latter are not so much. With the APCs (using usbhid-ups), I can set up configs for each based on the value they report from ups.serial. With the Tripp-Lites (using tripplite_usb), there is no value returned for

I'm trying to get a SMART2200CRMXL to work with nut, using a USB cable. tripplite_usb -a upsname returns: Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.2) Warning: This is an experimental driver. Some features may not function correctly. No matching USB/HID UPS found My system info: CentOS 5.5 nut installed from repo upsd version 2.2.2 TrippLite SMART2200CRMXL

Hi I have a Tripp lite smartusb550 using fedora 3 (2.6.12-1.1381_FC3smp). Managed to establish communication with the ups using the tripplite_usb driver but get the following errors Any help to make it work will be appreciated cheers Julio -----------------------------------------------------------------------------------------------------------------------------------------------------

On March 6, 2015, at 6:17pm, Charles Leppe ,cleppe at gmail.com> wrote: If this is the same protocol 3005 that we saw in mid-2014 (USB ID: 09AE:0001), then support will be part of the upcoming NUT 2.7.3 release. You wouldn't happen to know anyone who would be able to publish the specs of that protocol, would you? ;-) That would help remove the "experimental driver" warning.

Hi, I recently purchased a Tripp Lite SMART1000RM2U UPS (http://www.tripplite.com/en/products/model.cfm?txtSeriesID=744&txtModelID=2657) and tried to configure the NUT with tripplite_usb driver and encounter the following problems: 1. battery.charge doesn't report correct charge level when the UPS is On Batter. It just reports 0. Even though it will report 100 when on line power. 2. I

<nut-upsuser at lists.alioth.debian.org> I am doing my best to avoid have to spend $280 for a network monitoring card to put into a $190 UPS just to have some good remote monitoring capabilities. Rather, I would like to monitor my many 1U Tripp Lite's on my network using a Raspberry Pi running Raspian and using NUT. However, I cannot seem to get it working. And I while the hardware

Hello all; I am new to this list. Recently we have been getting these cheap new Tripp-Lite "LCD" style UPS'es around here, and I was surprised to find the lack of Linux support. The model name is OMNI650LCD. Anyway, I tried the tripplite_usb driver and got a message instructing me to contact this mailing list. I might try to fix the problem myself, if I was more familiar with the

I recently purchased a Tripp Lite OmniSV1500XL and I've had no luck getting nut to work. # lsusb Bus 001 Device 001: ID 0000:0000 Bus 006 Device 002: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter Bus 006 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 007 Device 001: ID 0000:0000 Bus 004 Device 009: ID 09ae:0001 Tripp Lite Bus 004 Device

Hello, I have a TrippLite SMART1500RMXL2U that I'm trying to get running with Nut 2.2.1. Running upsdrvctl start works, upsd works, but upsc has "issues": je-nas:~/src/nut-2.2.1# upsdrvctl start Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not