similar to: Powerware USB issue solved (bcmxcp_usb)

I tried switching to the USB version of bcmxcp_usb and get this error when I try starting up upsdrvctl or bcmxcp_usb like so: /etc/nut/bcmxcp_usb -DDDD -a powerware -u nut I used this for ups.conf: [powerware] driver = bcmxcp_usb port = auto With the serial/usb dongle, I used this successfully: [powerware] driver = bcmxcp port = /dev/ttyUSB0 What devices does

Hi everyone, First of all a big thank you for the NUT package, I've been using it for years and couldn't get by without it! I have two Powerware UPS's here, a 9120/1500va and a 5110/700va. The 9120 has used a hacked bcmxcp driver (serial) from the 2.0.2 nut version for about a year now (which I'll explain more about in a seperate email to the dev list), and the 5110 which I just

Kjell Claesson wrote: > Then i have a problem. My computer is down due to a > faulty mainboard, Youch. I hate it when that heppens. Hope it wasn't because you got a power spike ;-) Let me or Georg know if you want us to run any debug code. Feels like a bcmxcp_usb driver bug to me since the bcmcxp serial driver works fine and all my other USB devices work fine (wifi adapter, memory

I'm running Solaris 11 Express (snv_151a X86) with NUT 2.6.0 compliled from the source tarball and a Powerware 5115. I was seeing the driver hang, so gave it some '-D's (23 apparently ;-) and found that it seems to be getting into an infinite loop when reading data from the UPS. The debug output is attached and I would be very grateful for some help or advice on what to try next.

Hello, ppl! I try configure NUT for communicate with my Powerware 5115 UPS. As root I run '/lib/nut/bcmxcp_usb -DDDD -u root -a ups', but driver can't connect to my UPS. Some output: Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) debug level is '4' usb_set_debug: Setting debugging level to 3 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001

Hi I'm having a problem with the bcmxcp_usb driver FSD command: everything seems to work apart from: upsmon -c fsd Environment: Ubuntu 7.04, nut 2.0.5-1, nut-usb 2.0.5-1, Powerware 3105 UPS. upsd appears to send the FSD command to the UPS, upsmon then runs my NOTIFYCMD (which halts my PC) but the UPS just doesn't turn off. Here are the /var/log/daemon.log entries: Jul 24 23:13:16

Good evening, I tried getting this to work a couple years back but didn't have enough time to do all the debugging that was needed (apologies to the devs who tried to help at that time). It's working much better now, but I'm still not able to get an answer from upsc. Can anyone help me work out why I'm getting the error when querying with upsc: Error: Data stale My

Good evening, I tried getting this to work a couple years back but didn't have enough time to do all the debugging that was needed (apologies to the devs who tried to help at that time). It's working much better now, but I'm still not able to get an answer from upsc. Can anyone help me work out why I'm getting the error when querying with upsc: Error: Data stale My

Hi, I have set up a RaspberryPi computer to do monitoring of two UPSs. One is an MGE evolution 800, one is an Eaton Powerware 5110. The MGE was being monitored by another Linux (Ubuntu 12.04) computer, and I just copied and pasted in the relevant nut config and it works just fine with nut. I've tried to set up the Powerware 5110 with nut, and the bcmxcp_usb driver can't communicate

Greetings, The way that bcmxcp_usb reacts to and recovers from a USB cable unplug-plug appears to have changed significantly between 2.4.1 and 2.6.0. While I can see some improvements, bcmxcp_usb 2.6.0 does not appear to handle a USB cable unplug-plug correctly. Does anyone know if this has been fixed in subsequent releases? Here are the details. When the USB cable between my server and my

I can't find a way to configure bcmxcp_usb to communicate with 2 UPS units. Maybe more simply, I can't find a way to tell the driver to only talk to one of the units on the bus. That is, I cannot find that the driver configuration file supports "serial =" or "bus = " or other such discriminators that other drivers do (usb_apc, etc.). So, I can't assign one Eaton

Hi Andrew, thanks to subscribe to nut-upsuser and continue on this one: http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser The solution to your problem depends on the way you installed NUT. It's possibly one of these: https://launchpad.net/distros/ubuntu/+source/nut/+bug/6679 https://launchpad.net/distros/ubuntu/+source/nut/+bug/6585 Andrew Wallace wrote: > Hi > > I've

Hi, I recently downgraded my kernel to 2.4 series (2.4.32-rc2). Now I can't get nut running. It was fine with 2.6.14. It say's: --------------------- # ./bcmxcp_usb -uroot AUTO Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) Can't reset POWERWARE USB endpoint Unable to find POWERWARE UPS device on USB bus ... --------------------- I've straced it in nut_usb.c

Hi, I have got a Powerware 5110 UPS which has a usb interface on it. I have downloaded and compiled nut-2.0.3-pre2 with the usb drivers enabled on RedHat Enterprise V3 however I have been unable to get nut to connect to the UPS. I have tried executing the driver directly (using bcmxcp_usb -DD -u root /proc/bus/usb/002/002) as well as using upsdrvctl with the port set to auto (am I correct in

I can't seem to get NUT to connect to my new PowerWare (Eaton) 5115. (Linux 2.6.34.1 x86_64, Gentoo) # /etc/init.d/upsdrv start * Caching service dependencies ... [ ok ] * Starting UPS drivers ... Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3) USB communication subdriver 0.18

Hi, I have an UPS Powerware 5110 ( usb connection ), on Linux OS is Debian 4.0 The /etc/ups.conf file setting is: [myups] driver = bcmxcp_usb port = auto desc = "UPS Powerware 5110 1500 VA" When the daemon starts it displays the following message: "Starting Network UPS Tools: (upsdrvctl failed)." Looking at /var/log/syslog I found the following line

Hi I have PW 5115 500 UPS which has both RS232 and USB connectors. bcmxcp driver works fine with serial connection but bcmxcp_usb does not with USB one. After some USB sniffing on windows box I've found that PW5115 communicates in other way than supposed in driver. Applying attached patch makes driver to work properly. System: FreeBSD 6.2 but ugen driver needs patching in order to respect

Hi. I'm looking for a way to configure an Eaton Powerware 5125 under Debian Squeeze (amd64) with USB port. Can someone help me? Find attached bellow my settings: # cat /etc/nut/ups.conf ... [ups01] driver = bcmxcp_usb port = /dev/bus/usb/002/003 desc = "Powerware 5125" # ls -la /dev/bus/usb/002/003 crw-rw-r-- 1 root nut 189, 130 Nov 21 11:45 /dev/bus/usb/002/003 #

2009/8/28 Thomas Zulliger <Thomas.Zulliger at quiksilver.com.au> > Hi Arnaud > Hi Thomas, > I'm experiencing exactly the same problem > > DNS-323 fun_plug Fonz > nut 2.4.1-1.tgz > powerware 3105 > using BCMXCP_usb > > /mnt/HD_a2/packages # lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 002: ID 0592:0002 Powerware Corp. > Bus 001

Hi, I'm trying to get a Powerware 3105 UPS working on SuSE 10.0. I have compiled nut from the current Subversion repository. This UPS uses the bcmxcp_usb driver. I cannot get the driver to find the ups on the USB bus. The error message I get is:- -------------- bcmxcp_usb -u nut -DDDDD -a pw3105 -------------------- Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) debug level is