similar to: Selftest intervall, APC Smart-UPS 750 RM

I've acquired and installed NUT 2.4.1 on a D-Link DNS323 NAS. With exception of Load and Battery Temp readings all works well. A upsc ups at localhost command returns; battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2001/09/25 battery.mfr.date: 2008/06/05 battery.runtime: 2122 battery.runtime.low: 120 battery.temperature: 3022999999999998800 battery.type:

Hi Guys Having trouble getting my LiebertPSP UPS to work. $ upsc upsname battery.charge.low: 38 battery.charge.warning: 38 battery.type: PbAc device.mfr: Emerson Network Power device.model: LiebertPSP device.serial: device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.vendorid: 10af driver.version:

Hello all, About a month ago Peter and Charles were kind enough to try to help me with getting a Tripp Lite USB UPS to work with NUT. I reported quite a bit of initial success, and then other things here fell apart. Between work, fence building and a week-long out of town business trip, I have had to drop this from my list of things to do lately. I am back at it, and I believe I will have

On Jan 2, 2008 3:34 PM, Arjen de Korte <adkorte-guest at alioth.debian.org> wrote: > Author: adkorte-guest > Date: Wed Jan 2 20:34:26 2008 > New Revision: 1210 > > Log: > Parsing continues if the HID path for a report ends in 0x00000000 (these will not be made available). Commonly used as placeholders. > > It looks like (but correct me if I'm wrong) that reports

> On Thu, 8 Sep 2016, Jeff Bowman wrote: > > > (Note: running > > 'upsc ups at localhost' echoes only a blank line to the screen, as do > > both 'upsmon' and 'upsd.') > > Something is wrong here. Is the daemon upsd running? On a Unix/Linux > system, the command ps aux | grep ups gives the report > > upsd 3196 0.0 0.0 13228

Apologies for resurrecting an old thread and likely poor formatting - I wasn't subscribed to the list at the time and have copied it out of the archives (http://lists.alioth.debian.org/pipermail/nut-upsuser/2010-July/006104.html). I've been unable to locate any further progress on this UPS (Liebert 10af:0001) - a thread from 2009

On Jan 8, 2015, at 11:43 PM, Graham Menhennitt <graham at menhennitt.com.au> wrote: > Hello Nutters, > > I'm running nut 2.7.2 on FreeBSD 10-stable (via the FreeBSD port) with an APC Back-UPS CS 350 connected via USB. I get persistent (every few minutes) messages logged "battery is low" but I don't understand why. I don't think it's for the reason

Hello Nutters, I'm running nut 2.7.2 on FreeBSD 10-stable (via the FreeBSD port) with an APC Back-UPS CS 350 connected via USB. I get persistent (every few minutes) messages logged "battery is low" but I don't understand why. I don't think it's for the reason described in the FAQ (but I'm not 100% sure). In the trace output I can see that

Hi, Folks, I'm new to this admin game, and one of the hardest parts for me is figuring out where files/programs/data are stored in the file system. I think this is one of these situations. I've installed NUT on my Mac OS X 10.5 server, using the macports build. The machine is a dual processor G4 tower, connected to an APC UPS via USB. usbhid-ups seems to be working, see output

On Jun 10, 2019, at 2:32 PM, Marc Finns wrote: > > Hello, I read all FAQ and other sources but I could not find this situation, so I thought of asking the experts. > I successfully configured a Raspberry NUT server to control my UPS that powers several devices (NUC with ESXI VMs, Synology NAS etc). > All works well in principle, but I have the following behaviours that I could not

Oops... changing that to --with-user=nut solved one problem. I have the driver, upsd and upsmon running now. Thank you! Now I'm back to another issue, every 2 seconds I get in the logs: May 3 13:45:23 myhost upsd[2587]: Connected to UPS [eaton]: usbhid-ups-eaton It seems happy to do this forever. On Tue, May 3, 2016 at 8:17 AM, Charles Lepple <clepple at gmail.com> wrote: > On

Hi, I have an MGE Ellipse UPS connected to a FreeBSD 7.0 system and it works OK to begin with but after an hour or so it dies, eg.. Starts out OK.. debug level is '2' upsdrv_initups... Checking device (0463/FFFF) (/dev/usb2//dev/ugen0) - VendorID: 0463 - ProductID: ffff - Manufacturer: MGE UPS SYSTEMS - Product: ELLIPSE - Serial Number: 000000000 - Bus: /dev/usb2 Trying to match device

Hello, I am having difficulty using NUT to shut down my Netgate SG-1100 (a pfSense router) when the power level of the UPS gets critically low. Here is some relevant information: - OS: pfSense 2.4.5-RELEASE-p1 (FreeBSD 11.3-STABLE) - NUT version: 2.7.4 - Installed from: pfSense package 2.7.4_7 - UPS: AVR750U (Device release number 2) - I have included my config files, output from `upsc`, and

On Jun 8, 2015, at 8:23 PM, Greg Hersch <hersch.greg at gmail.com> wrote: > Hi Charles. I patched, reconfigured, remake'd, remake install'd - but > no change. however, some more likely helpful information below for > you. Thank you Odd. Are you sure that the new version of usbhid-ups got installed to the same path you are running? Also, there is no protection against

I have a Tripp-Lite BCPERS450, connected to a system running Ubuntu 16.04.3 LTS and NUT 2.7.2-4ubuntu1.2. I had to make my own /lib/systemd/system-shutdown/nutshutdown, but now everything is working except for powering on and off the UPS. Regardless of the settings of offdelay and ondelay in upsconf, and regardless of whether the AC power is on, when I say "upsdrvctl shutdown" the UPS

Hello, I'm using the stable amd64 port of Debian Linux. I installed (the latest) nut-2.0.1-4 and nut-usb packages for utilizing an APC Smart-UPS 1500 USB. I tried "apcupsd" first but "nut" makes an even more sophisticated impression on me and has more security options. I had problems with the newhidups driver. It didn't find a device with matching VendorID. And

Hi, I just decided to fix some scaling issues for my UPS (TRIPP-LITE SMART1500LCDT). Apparently that issue existed for some time (and I knew about it as well:-() See http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 for a thread. My little patch is attached (against 2.7.3). It seems to be working better for me but I don't have any other TRIPP-LITE's to test that I did

Hi, I just decided to fix some scaling issues for my UPS (TRIPP-LITE SMART1500LCDT). Apparently that issue existed for some time (and I knew about it as well:-() See http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 for a thread. My little patch is attached (against 2.7.3). It seems to be working better for me but I don't have any other TRIPP-LITE's to test that I did

On Apr 5, 2014, at 7:18 AM, Mick wrote: > $ upsrw -s "ups.delay.shutdown"="30" iDowell at localhost > Username (suzy): admin > Password: > OK This command is sending the value to the UPS (via the usbhid-ups driver). > $ upsc iDowell at localhost ups.delay.shutdown > 30 And this command ends up reading the value back from the UPS. > However, following

Hi All, I'm using an iDowell UPS with the usbhid-ups driver: $ upsc iDowell at localhost battery.charge: 100 battery.charge.low: 15 battery.runtime: 650 battery.type: Pb acc device.mfr: iDowell device.model: iBox device.serial: 00000001 device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto