Displaying 20 results from an estimated 2000 matches similar to: "Nut and PowerWare 5115"
2007 Jun 26
2
bcmxcp_usb and powerware 5115
Hello, ppl!
I try configure NUT for communicate with my Powerware 5115 UPS.
As root I run '/lib/nut/bcmxcp_usb -DDDD -u root -a ups', but driver
can't connect to my UPS.
Some output:
Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4)
debug level is '4'
usb_set_debug: Setting debugging level to 3 (on)
usb_os_init: Found USB VFS at /dev/bus/usb
usb_os_find_busses: Found 001
2014 Dec 01
4
06da:0002 Phoenixtec Power Co., Ltd UPS
Hi! all.
I have been reading every mail and news about nut and 06da:0002
Phoenixtec but not found a solution.
I have a very nice working ups from:
CENER ref: "Active 1000VA 230V 12 CENER" and front logo "LA 900"
It has COM3 and USB plugs, I don't know if it needs a standar RS232
I have test with varius drivers in ups.conf
[MyUPS]
driver = bcmxcp_usb | usbhid-ups |
2009 Sep 21
4
Powerware 5115 USB Issue
Hi,
I'm trying to get a Powerware 5115 to communicate with the NUT via USB under Debian Linux and need help.
Here is the output that I see.
co-nh5:/tmp/mnt/projects/pwusb/nut-2.4.1# /usr/local/ups/bin/upsdrvctl -u root start
Network UPS Tools - UPS driver controller 2.4.1
Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1)
USB communication subdriver 0.17
Communications with UPS lost:
2010 Jan 10
1
Eaton PW5110 + nut-2.4.1 + OpenBSD
Hello,
I 'm trying to set up an Eaton PW5110 using nut-2.4.1 in OpenBSD, my
ups.conf follows :
[myups]
driver = bcmxcp_usb
port = auto
desc = "Eaton PW 5110 (1500VA)"
My first attempt to run upsdrvctl ended up complaining about unimplemented
usb_clear_halt() in libusb. I patched libusb-0.1.12 with the following
patch :
2014 Jan 26
2
3g usb dongle - Huawei E1552
Hi
Please could someone assist me?
I?e got a 3g usb dongle - Huawei E1552.
[root@]# lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 03f0:8407 Hewlett-Packard
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus
2014 Dec 04
0
06da:0002 Phoenixtec Power Co., Ltd UPS
On Dec 3, 2014, at 2:02 PM, janc at telefonica.net wrote:
> USB error: error sending control message: Invalid or incomplete
> multibyte or wide character
This is a wild guess, but what about using the option "langid_fix=0x0409"?
--
Charles Lepple
clepple at gmail
2014 Dec 04
4
06da:0002 Phoenixtec Power Co., Ltd UPS
Hi Charles.
I have got this output with driver usbhid-ups
ups.conf
[Phoenixtec]
driver = usbhid-ups
vendorid = 06da
productid = 0002
port = auto
#~ langid_fix=0x0409
desc = "CENER ONLINE 1000VA"
# export USB_DEBUG=5
# ./usbhid-ups -a Phoenixtec
Network UPS Tools - Generic HID driver 0.37 (2.6.4)
USB communication driver 0.32
0.000000 debug level is '3'
0.000557
2005 Jun 30
4
MGE Protection Center and Suse
Hi
I try since a week to run my MGE Protection Center under Suse Linux 9.3.
At the MGE site i found an HowTo. I have installed NUT an create the=20
configs but at boot the newhidups driver say=B4s "no USB/HID UPS found".=20=
Anyone an Idea?
Johannes Schatz=
2010 May 11
0
more USB logs
# export USB_DEBUG=5
# /usr/local/ups/bin/usbhid-ups -a CP550SLG -DDDDD
Network UPS Tools - Generic HID driver 0.34 (2.4.3)
USB communication driver 0.31
0.000000 debug level is '5'
0.000426 upsdrv_initups...
usb_set_debug: Setting debugging level to 5 (on)
usb_os_init: Found USB VFS at /dev/bus/usb
usb_os_find_busses: Found 001
usb_os_find_busses: Found 002
2005 Sep 23
11
trying to use powerware 3110 USB with NUT
Ok, I installed the ups, and installed nut, and /proc/bus/usb/devices says
this
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=06da ProdID=0002 Rev= 0.01
S: Manufacturer=POWERWARE
S: Product=Powerware UPS
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00
2008 Sep 26
0
FreeBSD usbhid-ups problem
Citeren "Daniel O'Connor" <doconnor at gsoft.com.au>:
> usb_control_msg: 161 1 769 0 0x813310c 2 4000
> USB error: error sending control message: Input/output error
> Can't retrieve Report 1: Input/output error
> upsdrv_updateinfo...
> Got to reconnect!
>
> usb_set_debug: Setting debugging level to 3 (on)
> usb_os_find_busses: Found /dev/usb0
>
2006 Apr 13
1
Re: bcmxcp_usb "Can't open POWERWARE USB
Kjell Claesson wrote:
> Then i have a problem. My computer is down due to a
> faulty mainboard,
Youch. I hate it when that heppens. Hope it wasn't
because you got a power spike ;-)
Let me or Georg know if you want us to run any debug
code. Feels like a bcmxcp_usb driver bug to me since
the bcmcxp serial driver works fine and all my other
USB devices work fine (wifi adapter, memory
2009 Sep 05
1
FreeBSD, NUT OmniVS1500
Howdy,
I had this working with lots of help for a developer before (Charles Lepple),
but after upgrading to a somewhat more current version of FreeBSD the
patched-up version stopped working. Seeing as this was more than a few years
ago, I thought I'd give a new libusb and NUT a try to see if it might work out
of the box. So far, no luck.
Some info:
FreeBSD 6.3
libusb 0.1.12
NUT 2.4.1
2016 Jan 22
1
Not getting nut to work with Eaton 5115
Following the instructions a following site I can not get nut to work with
my UPS.
http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monitor-eaton-ups
Hope that you can find out what is wrong by the provided info in the email
Best Regards,
Magnus Karlsson
# lsusb -s 001:005 -v
Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS
Device Descriptor:
bLength
2005 Nov 04
2
bcmxcp_usb / kernel 2.4.32-rc2
Hi,
I recently downgraded my kernel to 2.4 series (2.4.32-rc2). Now I can't
get nut running. It was fine with 2.6.14.
It say's:
---------------------
# ./bcmxcp_usb -uroot AUTO
Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0)
Can't reset POWERWARE USB endpoint
Unable to find POWERWARE UPS device on USB bus
...
---------------------
I've straced it in nut_usb.c
2007 Mar 04
1
OMNIVS1500XL and FreeBSD
I'm running FreeBSD 6.2 with Nut 2.0.5 installed from ports...
I have a TrippLite OmniVS1500XL plugged in, but I'm having little luck with the
tripplite_usb module. I have already built and booted a new kernel with UHID
disabled so that libusb can grab /dev/ugen0.
At first I was able to get the following out of the driver:
# USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -u root
2006 Apr 08
2
Powerware 9120 serial connection via USB/serial dongle
I decided to try this to see if it worked better since
Powerware decided to build in some oddball USB
protocol instead of using a HID UPS profile, but it
doesn't seem to work. The USB/serial dongle is
recognized by Linux and added as /dev/ttyUSB0, owned
by group "dialout", so I had to add the nut user to
the dialout group. In the compatibility list, the
proper driver for the
2010 Sep 26
3
Cannot connect to APC Smart via USB under FreeBSD
Hi, folks!
There is FreeBSD 7.1, NUT 2.4.1, UPS APC Smart 2200 XL.
NUT is compiled from ports with following options:
---------------------------------------
_OPTIONS_READ=nut-2.4.1_5
WITH_SERIAL=true
WITH_USB=true
WITH_SNMP=true
WITHOUT_NEON=true
WITHOUT_PDU=true
WITHOUT_HAL=true
WITHOUT_IPV6=true
WITHOUT_CGI=true
---------------------------------------
UPS is successfully recognized by OS
2009 Mar 23
1
[nut-commits] svn commit r1817 - in trunk: . data
Citeren Kjell Claesson <keyson-guest op alioth.debian.org>:
> Author: keyson-guest
> Date: Mon Mar 23 17:37:37 2009
> New Revision: 1817
>
> Log:
> data/driver.list, add Eaton Powerware 9130 compatibility with bcmxcp
> and usbhid-ups.
1) Is this really true? I would have expected that this device would
be supported through bcmxcp (serial) and bcmxcp_usb (USB), like
2009 Apr 16
1
Nut and PowerWare 5115
Hi everyone,
Been searching like crazy to find an answer to this. I have even read some of the source code but cannot figure this one out.
I have installed nut 2.4.1 on my QNAP 409 Pro. (command: ipkg install nut)
I have configured the ups.conf, upsd.conf and upsd.users.
When i run "upsdrvctl start" I get the following error messages and output.