similar to: Question about Tripplite SU10KRT3U

A client of mine has an APC Back-UPS 350 model (USB connected). His office had a power incident yesterday, where there was an interruption of about 30 seconds. During that time, the server shut down. As soon as it went on battery, the daemon initiated a shutdown. In checking it today, I see the ups.delay.shutdown setting is -1. I tried to adjust it, but could not do so. What does the

Hello all, I was having this problem and finally found a temp fix for it. The symptoms seem to be this: --> You are on a linux client --> You have mounted a samba drive from you linux client to a linux server. --> When you try to make modifications or copy file from your client to the server, it takes a long time or times-out. --> Your /var/log/mesages file states smb_trans2:

Following the recent "trans2" exploit announcement, SuSE released kernel 2.6.5-7.111.5 to deal with it. I've installed the kernel upgrade on my desktop (SuSE 9.1, Samba 3.0.4). However, with this kernel, when I try to save to a share on my server (Samba 2.2.8), I get this set of error messages: Dec 13 22:10:25 p133 kernel: smb_trans2: invalid data, disp=0, cnt=0, tot=0, ofs=0 Dec 13

A client of mine has an APC Back-UPS 350 model (USB connected). His office had a power incident yesterday, where there was an interruption of about 30 seconds. During that time, the server shut down. As soon as it went on battery, the daemon initiated a shutdown. In checking it today, I see the ups.delay.shutdown setting is -1. I tried to adjust it, but could not do so. What does the

We're looking at replacing some old APC SmartUPS 5000s with something that has USB so NUT can more easily talk with it (and yes, I've tried USB-RS232 adapters and every one I tried started kicking out errors within a few hours). One of the bids we have is for a "Tripp Lite UPS Smart Online 5000VA 4500W Rackmount 5kVA 200V/240V" as the potential replacement unit. I have no

Re: "Does it work well with NUT?" Assuming it is the SU5000RT4UHV, the similar units I've tried seemed to work fine. For reference, the SU5000RT4UHV should be a 4004 USB protocol. ________________________________ From: David Zomaya Sent: Wednesday, March 25, 2020 5:21 PM To: Lee Damon; nut-upsuser Mailing List Subject: Re: [EXTERNAL] [Nut-upsuser] thoughts on tripp lite Smart

The 2.0.2+ tripplitesu drivers do not recognize SmartOnLine SU2200XL and possibly other SmartOnLine UPSes. Here is a one-line fix. Lee --- ../nut-2.0.2/drivers/tripplitesu.c Thu Jan 27 08:33:21 2005 +++ drivers/tripplitesu.c Sat Oct 1 13:38:51 2005 @@ -227,7 +227,7 @@ buffer[4] = '\0'; if (!strcmp(buffer, "~00D")) { - if (ser_get_buf_len(upsfd, buffer, 4, 3, 0) <=

Hi, Nut-upsusers, I am having problem configuring NUT to work with Tripplite UPS through SNMP. There is a Tripplite SmartOnline SU10KRT3/1X and attempts to monitor it using NUT though SNMP are failing... OS: Enterprise Linux 6, Nut version: 2.6.5. ups.conf is configured: [trippliteups] driver = snmp-ups port = 10.200.254.39 desc = "ProductionServer"

Hi Matt, first, note that Russell (Kroll) is retired for long. Support request should go to the NUT Users list, which needs subscription. 2010/6/23 matt <matt at mattevans.org> > Experts, > > I have gotten nut to work this evening, with usbhid-ups, and a small > addition to udev, on my new TrippLite SmartOnline model. I am on Ubuntu > 10.04. This is the 2U rackmount 800W

Hi, I'm running the latest stable nut (2.4.3). It doesn't appear to provide support for the Tripp Lite SmartOnline SU1000XLA. [sups] driver = usbhid-ups port = auto vendorid = 09ae productid = 4004 4337# upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 Using subdriver:

I have the following UPS that I'm trying to get to work with NUT: SU3000RTXL3U I have it connected via USB. My ups.conf looks like: [test] driver = usbhid-ups vendorid = 09ae port = auto When I run upsdrvctl -DD start, I get: Network UPS Tools - UPS driver controller 2.4.1 Starting UPS: test exec: /lib/nut/usbhid-ups -a test Network UPS Tools - Generic HID driver 0.34 (2.4.1)

a friend gave me an old apc smart-ups 1250 it has a rs232 interface but i have no pc with a rs232 port i attempted to use a rs232 to usb adapter but the ups goes nuts i connected the ups to batteries and verified it was working properly when i plug the usb cable into the pc the ups shuts down when i attempt to turn it on it beeps twice and shuts down this all occurs before i start the nut software

On 5/28/19 3:39 PM, Julian H. Stacey wrote: > grumpy at mailfence.com wrote: >> a friend gave me an old apc smart-ups 1250 >> it has a rs232 interface but i have no pc with a rs232 port >> i attempted to use a rs232 to usb adapter but the ups goes nuts >> i connected the ups to batteries and verified it was working properly >> when i plug the usb cable into the pc

I installed Board Master a software that control a CNC machine to produce PCB (Printed Circuit Board). The software install flawlessly but to check if it works I need RS232 working to control CNC machine. I tried to set connection parameters in Board Master choosing COM1 (the only available) but CNC machine don't move and software keep asking for switching machine on. Of course software and

I run a small network at home, with a Linux server, which shares files and a printer. I also have a Linux PC (RH 9, KDE 3.1, CUPS 1.1.17) from which I am trying to share a Lexmark 3200 inkjet. Samba (2.2.7a-security-rollup-fix) seems to be generally configured OK - I can print to the Lexmark from a Windows 98 system, and from another PC running Mandrake 9.1. However, I am unable to print from two

Can anyone help getting a Tripplite SU2200XL to work with nut 2.0.3 using the supplied serial cable? Starting the ups service yields: Starting tripplitesu: Network UPS Tools - Tripp Lite SmartOnline driver 0.02 (2.0.3) Unable to detect Tripp Lite SmartOnline UPS on port /dev/ttyS0 I also have Tripplite's PowerAlert 12 software installed and when run it finds the UPS without a problem. So

I've several USB <-> RS-232 dongles around. As well as a few embedded devices. They all "Just Work (tm)" on Redhat, CentOS, Fedora, Debian, Raspian and Kali. Knock on wood - never had a problem using any of them. As the drivers are part of the kernel, I'd expect any distro using a recent kernel to do well. On Wed, Jul 8, 2020 at 9:24 AM Leroy Tennison <leroy at

On Tue, 28 May 2019, nicolae788 wrote: > Apc uses a propietary serial cable and your convertar for sure it's wired > standard. Refer to the following link for info. > https://pinoutguide.com/UPS/apc_smart_cable_pinout.shtml > > Good luck > > On Tue, 28 May 2019, 15:13 , <grumpy at mailfence.com> wrote: > >> a friend gave me an old apc smart-ups 1250

Hello Does anybody know if it's possible to monitor a Powercom EBk 500 (RS232)? the trick is that I am using a raspberry pi, it does not have RS232 so I connected a keyspan RS232 to USB adapter, but so far I can?t make this work. Thanks for your time to read this. -Edgar -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi there Does any one of you know something about R and an implemented RS232-Interface? Are there any packages? Or is it possible to write an extensions or something like that in C/C++ ? The problem is that i should handle the information from a measuring device via the RS232-Interface (probably you know LabVIEW, which provides this functionality). These informations should then directly be