similar to: Poll UPS / Driver not connected with UPS MGE Evolution 850VA USB

Hello, I have this message in syslog that I'd like to ignore: === Apr 5 15:31:37 server77 upnpd[11728]: TimerThreadRemove failed! === I use these rules to ignore it in a file located in ignore.d.server (which contains some other rules which work): === ^\w{3} [ :0-9]{11} [._[:alnum:]-]+ upnpd\[[0-9]+\]: TimerThreadRemove failed!$ ^\w{3} [ :0-9]{11} [._[:alnum:]-]+

Hello ! I've just a problem with upsd/upsmon 2.0.4, please have a look at the upsc command: -------------------- battery.charge: 59 battery.charge.low: 5 battery.runtime: 1312 battery.voltage: 24.0 driver.name: newhidups driver.parameter.port: auto driver.version: 2.0.4 driver.version.data: MGE HID 0.9 driver.version.internal: 0.28 input.frequency: 0.0 input.transfer.boost.low: 184.0

Hello, I'm using NUT to manage a MGE Ellipse ASR UPS, with the newhidups driver. It works fine, except that after a few hours, I get a few errors from the kernel and the driver dies. Here's the output from the syslog: Apr 26 02:00:41 ezquiel kernel: usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 128 rq 6 len 255 ret -110 Apr 26 02:00:43 ezquiel last message repeated 2 times

I recently purchased a CyberPower CP1200AVR UPS and am trying to get NUT 2.0.3 or NUT 2.1.0 to work with the newhidups driver, but am having little success. Before I purchased I did some googling and saw people talking about problems so I'm guessing it may not be supported yet? I did find some posts about people getting it to (sort of) work with some hacks, but couldn't tell if they

Dear List, I thought it might be useful if I wrote up my notes on getting an MGE UPS to work with NUT and openSUSE. The MGE UPS (an Ellipse 1500 USB) will work well with NUT and openSUSE 10.2, but not "out-of-the-box": there are some things you need to do: Intro. MGE have built rpms of NUT which greatly simplify installation. Merci MGE. I used the rpm's for nut-2.0.5 and the

tags 354429 + upstream thank 2006/2/26, suicune@eml.cc <suicune@eml.cc>: > Package: nut > Version: 2.0.1-3 > > > This is the spam message: > drivers/usb/input/hid-core.c: ctrl urb status -32 received > > I never once saw this message until after I installed and configured > nut. > > Spam begins during boot and continues infinitely until reboot or nut is >

Hello, I encountered a problem with my APC Smart-UPS 750, connected via USB, using newhidups. Without any reason, nut/upsmon shut down my PC: >>> Oct 13 12:57:08 echo kernel: usb 2-9.1.1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 161 rq 1 len 8 ret -71 Oct 13 12:57:12 echo upsmon[5060]: UPS smart750@localhost on battery Oct 13 12:57:12 echo upsmon[5060]: UPS smart750@localhost

I have a ups that doesn't always (sometimes it does) load NUT right. I use Gentoo: * sys-power/nut Latest version available: 2.6.0-r1 Latest version installed: 2.6.0-r1 Size of files: 1,663 kB Homepage: http://www.networkupstools.org/ Description: Network-UPS Tools License: GPL-2 The kernel is 3.0.4. Here is the dmesg output:

Do you know any backend that implement instructions as a flag modifier in instruction ? Thank, Vincent Lejeune ----- Mail original ----- > De : Jakob Stoklund Olesen <stoklund at 2pi.dk> > À : Vincent Lejeune <vljn at ovi.com> > Cc : "llvmdev at cs.uiuc.edu (LLVMdev at cs.uiuc.edu)" <llvmdev at cs.uiuc.edu> > Envoyé le : Lundi 6 août 2012 20h06 >

Hi, R600 hardware (Radeon gfx card) does neither have a NEG nor an ABS instruction ; however any sources operand can be negated/abs'd by setting a bit for every source operand in the final bytecode (but not DST). A good way of modeling this behavior in LLVM is by using TargetFlag on operand. Currently the R600 LLVM backend in Mesa lower NEG and ABS DAG instruction to a MOV + TargetFlag using

Hi, I keep getting the following messages (or similar) in my syslog: Nov 23 11:38:08 io kernel: [763936.921566] usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -110 Nov 23 11:38:08 io kernel: [763936.972569] usb 3-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -75 Nov 23 11:38:08 io kernel: [763936.976568] usb 3-2: usbfs: USBDEVFS_CONTROL

Hello, I have random errors that I can not analyze nor fix: when several users connect to the same Samba share, they get sometimes error messages "the local drive name is already in use. This connection has not been restored", although the connection is still usable afterwards. This sometimes breaks a file operation. Clients are running Windows 2000, and the server is a Solaris 8

Hello, I read the thesis about rsync and I would like to know if we can do something different with rsync. Imagine that I have one server that contains a set of data. This server is not very strong compare to the number of client that want to sync there data with the server. If we say that there s 1000 clients, each client, when sync, will send a list of keys to the server and the server must

On Aug 6, 2012, at 11:00 AM, Vincent Lejeune <vljn at ovi.com> wrote: > Ok. > > I tried to do it using a pass after register allocation, lowering NEG/ABS instructions. > However I met a problem : apparently getNextOperandForReg() can returns a MachineOperand before the one I'm processing. > > The following code snippet : > > > void

This is an informal poll. If you are primarily a Ruby programmer, - What was your primary language before you started coding in Ruby? Else, - What''s your current programming language of choice? I''ll start: Perl -------------- next part -------------- An HTML attachment was scrubbed... URL:

On Mar 7, 2014, at 4:12 PM, Josu Lazkano <josu.lazkano at gmail.com> wrote: > Are the messages a problem? Or could I ignore? Since they aren't happening on each poll interval, they are not a big problem. The driver should recognize -110 as a timeout, and retry the query.

Folks, I have been working on a problem with the usbhid-ups driver and the MGE / Eaton Ellipse series UPS. There seems to be light at the end of the tunnel. For whatever reason, these devices seem to trigger error 'EPIPE' randomly. So far, the response to this of the usbhid-ups (and previously, newhidups) driver is to reconnect. Most of the time this will succeed on the first

Hi, We have some problems with Xen 4.0.1 and resinzing of lvm volumes. When I resize a lvm volume with "lvresize -L+50G -n /dev/data/windows-data" the Windows Dom U don''t scan the new size of the lvm volume. The only way to see the extend is to halt and create the DomU We have try with sign and unsigned drivers gplpv, with Windows 2008 and Windows 2003 server :

Hello, I have a Salicru UPS in a Debian Wheezy connected with a USB HUB: # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ... Bus 001 Device 003: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub Bus 001 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial The problem is that I have some failed messages: # dmesg ... [90941.136274] usb 1-3.7: usbfs:

Here it is :  Starting program: /home/vlj/llvmbin/bin/llc -march=r600 -mcpu=cayman /home/vlj/shader [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". llc: /home/vlj/llvm/include/llvm/ADT/SmallVector.h:143: const T& llvm::SmallVectorTemplateCommon<T, <template-parameter-1-2> >::operator[](unsigned int) const [with T