similar to: addition to "nut" compatibility list

Hi Saulius, The spec you sent me is simply a Megatec excerpt: http://www.networkupstools.org/protocols/megatec.html So Socomec is simply a megatec rebranding (selling by simply putting its name on). As per the NUT compatibility list (http://www.networkupstools.org/compat/stable.html), Sicon are supported by the powercom driver. But since it's a megatec unit, you should preferably try the

Hello Niels, thanks a lot for this compatibility submission. This is part of the remaining things at Eaton. I've added an entry to the new Hardware Compatibility List: http://new.networkupstools.org/stable-hcl.html BTW, have you tested a shutdown with this unit? Otherwise, you should! thanks again, Arnaud Quette Le samedi 02 octobre 2010 ? 12:42 +0200, Niels Kristian Jensen a ?crit :

2010/10/18 Michael Eitelwein > Hi Arnaud > Hi Michael, > Yes, did test it without success. > can you please post the first 20 seconds running blazer_usb in debug mode, ie: $ sudo /lib/nut/blazer_usb -DDD -a cyberpower aside from fixing the megatec situation, ensuring that you'll be able to run the replacement is also to be considered ;-) now, for the megatec issue, we need

Hi Bj?rn, 2009/10/9 Bj?rn Torkelsson > Public bug reported: > > Binary package hint: nut > > I have recently upgraded from hardy to intrepid to jaunty. After > upgrading to Intrepid the megatec_usb stopped recognizing my Trust PW- > 4130M ups, it still does not work on Jaunty. It worked without any > problems in hardy. > > I tried the megatec_usb driver from hardy

Hi Patrick, 2010/11/15 Patrick O'Malley > I've confirmed that the CyberPower CP1350AVRLCD works with nut using > the USB port and the usbhid-ups driver. It is not on your list. > Thanks! > have you checked all variables, and most of all that shutdown works as expected? ie http://new.networkupstools.org/user-manual.html#Testing_shutdowns please also send us an upsc output.

Hi Chad, Thanks for your report. Everything seems fine, apart from the battery.date (2052/00/36), which vaguely recall me something... I've added this info to the Testing and trunk driver.list Arnaud -- Please note my new email address: arnaudquette at eaton.com -- Linux / Unix Expert R&D - MGE Office Protection Systems - http://www.mgeops.com Network UPS Tools (NUT) Project Leader -

Hey Jarett, 2009/2/24 <jarett.stevens at usermail.com> > After upgrading to the 2.4.1 version, I wasn't able to read as many > variables from my UPS. After a bit of experimentation, I determined that > the firmware on my UPS was different than what is currently in the > apcsmart driver, though it had worked before. I located my firmware > version (5ZM), and added in

Hi Jayson, 2008/1/11, Jayson Anderson <jayson.anderson at gmail.com>: > Greetings Arnaud, > > I'm sorry for taking up your time, but you are the primary POC for the NUT > project: > > I was just wondering if you know of any planned support for the Belkin > F6H550-UPS within the NUT project ? > > I am not a coder and as such, completely at the mercy of the

Dear users and developers, just a small mail to inform you that: * EATON protocols library is now mostly complete! UPSCode II has been published for some time now. I've just released this morning a full set for the XCP protocol (Powerware), including the general information, and Alarm / Meters maps. The MGE section was already complete for long. * some more development units have been

Le samedi 12 septembre 2009 ? 01:59 -0300, Vitor Choi Feitosa a ?crit : > Hi Arnaud, Hi Vitor, > I found your email on the contact page and since you seem to work for > Eaton and is involved in the NUT community I think you're the right > person to contact. > > I've got an Eaton NV 1000H and just installed it here. Before NUT > configuration I've checked the HCL

Hi Vitaly, 2009/2/26 Vitaly Polyakov <var at fapu.ru> > Hello. > > You are the site administrator Project Network UPS Tools, are not you? I > think? it is a good idea to add information about the compatibility the > NUT with a Mustek PowerMust 424/636/848 USB. These UPS are using > modified protocol, and therefore the old driver megatec_usb is not > suitable and the

2008/4/10, David Erosa <david.erosa at gmail.com>: > Public bug reported: > > Binary package hint: nut > > After updating to last nut package (2.2.1-2.1ubuntu6), the megatec_usb > driver seems to be working, except for the charge percentage: > > $ /lib/nut/megatec_usb -DDDDD -a SAI > ... > Checking device (0665/5161) (001/007) > - VendorID: 0665 >

Le lundi 23 juin 2008 ? 21:16 +0530, John Kennedy a ?crit : > Salut! bonjour > I have an iBall Nirantar UPS-630 UPS > (http://iball.co.in/inner/show_product_details2.asp?catid=25) and am > interested in hooking it up to my Ubuntu box. Problem - it only comes > with WinPower Windows driver... Alas I search for it's compatibility... > > I send you this message as this

Le lundi 23 juin 2008 ? 21:16 +0530, John Kennedy a ?crit : > Salut! bonjour > I have an iBall Nirantar UPS-630 UPS > (http://iball.co.in/inner/show_product_details2.asp?catid=25) and am > interested in hooking it up to my Ubuntu box. Problem - it only comes > with WinPower Windows driver... Alas I search for it's compatibility... > > I send you this message as this

Hi Peter, I've fwded your info to the list, as other people might be interested in. I've also logged a patch tracker so that you can follow its inclusion: https://alioth.debian.org/tracker/index.php?func=detail&aid=302882&group_id=30602&atid=411544 As a side note, there is a work underway to merge the similar driver (mustek, powermust, ...) into one named megatec. This one

Hello Fabian, > I got my UPS (Belkin F6H350deUNV) to work with the "megatec" driver. > Obviously the de/uk part in the name of these products are > localizations of some sort. So the F6H 350/500/750 UNV Home Office > products should all work with that driver. > > bigone nut # upsc ups@localhost > battery.charge: 95.0 > battery.voltage: 13.50 >

Hi Thomas, Le mercredi 02 juillet 2008 ? 18:52 +0200, Thomas Backman a ?crit : > Hey! I just bought my first UPS, a Cyberpower Value 600E, and set it > up using NUT 2.2.x (on Gentoo x86_64). Everything is working great, > using the usbhid-ups driver, and the UPS isn't on the compatibility > lists, so I figured I'd post a little heads-up that it works. The > battery

2009/4/6 Nick Jenkins > Hi, > Hi Nick, > > Just one extra entry for the > http://eu1.networkupstools.org/compat/dev.html list: > > -------------------------- > [UPSONIC-DS800] > driver = megatec_usb > port = auto > desc = "UPSONIC DS-800" > -------------------------- > > This UPS connects with a standard USB cable, and seems to works great

2010/8/4 BESERIE Romain > Hi Arnaud, > bonjour Romain, I have bean searching desperately for months after a compatible driver > for my ups. And finally, it is on your compatibility list pages that I > found what I was looking for... in the "If your UPS isn't listed" part. > > it's a POWERCOM SKP-700A connected through usb. and it fully compatible > with

2010/10/13 Vitaly Lavrov > I found bug in nut/drivers/megatec.c - force shutdown may dont work. > See patch. > could you please give a try to blazer, since it is set to replace megatec with 2.6.0. Arjen will quite probably comment on your patch usefulness within the blazer scope. thanks for your contrib. cheers, Arnaud -- Linux / Unix Expert R&D - Eaton -