similar to: Tripp lite SMART1000LCD

These patches allow this device to function in nut.. diff --git a/trunk/drivers/tripplite-hid.c b/new/drivers/tripplite-hid.c index c36da98..dddd13c 100644 --- a/trunk/drivers/tripplite-hid.c +++ b/new/drivers/tripplite-hid.c @@ -71,6 +71,8 @@ static usb_device_id_t tripplite_usb_device_table[] = { { USB_DEVICE(TRIPPLITE_VENDORID, 0x2005), battery_scale_0dot1 }, /* e.g. TrippLite

Hi, I was wondering if Tripp lite SMART1000LCD is working in nut or what code I should change to get it to work. I saw some older posts about this model and the OMNI1000 LCD but the model I have has a different product ID, 2007 vs. 2005: Device descriptor: VID:09ae, PID:2007 Device release:0x10, USB release:0x110 Descriptor Length:18, Type:1 Device Class:0, Subclass:0, Protocol:0, Num

Hi, With recent revision, it's impossible to get upsdrvctl started: [root at teevee nut]# /usr/local/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.3.0-1352 Network UPS Tools: 0.29 USB communication driver - core 0.33 (2.3.0-1352) Warning: This is an experimental driver. Some features may not function correctly. Using subdriver: TrippLite HID 0.2 (experimental)

Thanks Kjell for the help with the build problem. Thanks for your input, too, Charles. Now I have a new problem that I think has already been solved. I have Tripp Lite Smart1000LCD UPS (usb), but I can't get the newhidups driver to communicate correctly. I found a thread on the development list from last December where Jonathan Freedman described had a problem with this UPS in a thread

Trying to get a Tripp-Lite to work with nut--Ubuntu 10.10. I was getting the error message "unable to claim USB device", tried to unbind the drivers to that device, and had the following delightful experience. In short, continue to get the same problem, and the drivers bound themselves back. Any suggestions? ----------- usb.conf has the following: [Tripp-Lite] driver = usbhid-ups port

I have just compiled and installed nut-2.4.1 and I get the following errors when I try it: There is no difference if I run it as root or normal user. Any help would be appreciated. # usbhid-ups -DDD -a SMART1000LCD Network UPS Tools - Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 debug level is '3' upsdrv_initups... Checking device (1D6B/0002) (001/001) libusb

[please use reply-all to post to the list - the mailing list does not add a reply-to header. thanks!] On Dec 18, 2017, at 11:37 AM, Ken Olum wrote: > > I have a Tripp-Lite BCPERS450, connected to a system running Ubuntu > 16.04.3 LTS and NUT 2.7.2-4ubuntu1.2. I had to make my own > /lib/systemd/system-shutdown/nutshutdown, but now everything is working > except for powering on

Hi everybody! I'm triying to install a Sangoma A200-R FXO card on a Debian Linux 5 (Lenny), 2.6.26 kernel. To install wanpipe driver I type: WANPIPE_FOLDER# ./Setup install Everything seems to be ok. There are no broken dependencies and the hardware is well detected, even zaptel is recompiled with no errors, but at the time to compile wanpipe I'm getting this error message:

Hey I recently picked up a couple SMART1000LCD TrippLite UPS's. These are similar to other usb ups's that have been mentioned on the list in the past few months. I tried a few patches posted last month and got some amount of success. That being said, I am thus far unable to get much love from the actual upsd itself. Any pointers in terms of what I may need to change or what help I can

Hello, I'm new to the list, new to NUT, but not new to Unix-likes. I could use some help getting NUT to talk to my Tripp Lite G1000U. Searching Google for "Tripp Lite G1000U" returns exactly two hits at this writing, so that may not be a good sign. ;-) It may just be rebranded for sale through this source (Costco). Externally, the G1000U looks much like the SMART1000LCD: an amber

I have a problem with large files (>2 Gb) in a Debian sarge based system. I install samba 3.0.34 with this configuration: ./configure --with-smbwrapper --with-ldap --with-automount --with-smbmount --with-pam --with-pam_smbpass --with-ldapsam --with-syslog --without-profiling-data --with-quotas --with-sys-quotas --with-libsmbclient --with-acl-support --with-utmp --with-vfs --with-winbind

*************************************************************************************************** Workshop in the CISTI'2013 8th Iberian Conference on Information Systems and Technologies Lisbon, Portugal, June 19 - 23, 2013 http://www.aisti.eu/cisti2013/index.php?option=com_content&view=article&id=82&Itemid=67&lang=en

*************************************************************************************************** Workshop in the CISTI'2013 8th Iberian Conference on Information Systems and Technologies Lisbon, Portugal, June 19 - 23, 2013 http://www.aisti.eu/cisti2013/index.php?option=com_content&view=article&id=82&Itemid=67&lang=en

*************************************************************************************************** WORKSHOPS in CISTI'2013 8th Iberian Conference on Information Systems and Technologies Lisbon, Portugal, June 19 - 22, 2013 http://www.aisti.eu/cisti2013/index.php?option=com_content&view=article&id=82&Itemid=67&lang=en

*************************************************************************************************** WORKSHOPS in CISTI'2013 8th Iberian Conference on Information Systems and Technologies Lisbon, Portugal, June 19 - 22, 2013 http://www.aisti.eu/cisti2013/index.php?option=com_content&view=article&id=82&Itemid=67&lang=en

Hi all, I received a report of a client which stated that two of its agents are ?logging in? to the queues when they actually aren?t there working. They appeared to be logged on all night. They thought they weren?t logging off correctly, but they checked one of them and he was following the procedure. Any ideas of what can be happening? Is there a way to prevent logins to queues afterhours?

Hello: I'm trying to authenticate webmail (roundcube) and dovecot with Apereo CAS. I don't find any good guide and everything I have found is some years old. Has any of you done a recent integration with CAS and can share the details ? Best regards -- ------------------------------------------------------ Juan Carlos Sanchez Hernandez Servicio de Infraestructura e Innovaci?n

MUJERES EN LA CIMA imagen LIDERAZGO Y EMPODERAMIENTO EMPRESARIAL PARA MUJERES 27 DE NOVIEMBRE 2023 CONFERENCIA VIRTUAL EN VIVO Este evento est? dise?ado para desatar el potencial de liderazgo que cada mujer posee y forjar una trayectoria empresarial redefinida por la excelencia, la innovaci?n y la influencia. Reg?strate Ahora Si el bot?n no funciona o si usted lo prefeire, puede simplemente

Tripp Lite Smart1000LCD Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 This TrippLite device (09ae:2010) is not (or perhaps not yet) supported by usbhid-ups. Please make sure you have an up-to-date version of NUT. If this does not fix the problem, try running the driver with the '-x productid=2010'

mis queridos tal vez les llegue algo de proydesa aparte de hacer spam son un pesimo y asqueroso instituto de tecnologia. dan verguenza los profesores son malisimos no saben nada de nada y aparte es caro. a los inutiles de proydesa ya les habia dicho que no me manden spam esto esta con cco a todos mis contactos incluyendo a mis companeros de la facultad de sistemas y co worckers, sigan mandandome