similar to: Cisco ATA 187 configuration file

For anyone who is interested, I have a working tftpd (modified wvtftpd) capable of serving configuration, dialplans, and ringtones to Cisco 7960/7940 and ATA-186 devices that are located behind NAT firewalls. As TFTP is not a very firewall/NAT friendly protocol, I had to break some rules to get it to work with these cisco devices. It might cause problems for other TFTP clients, but it works with

John; I'm trying to flash 7.1. What I followwd was the wiki page you refer to. My real question is do I need the .load file tftp debug shows the 7960G is asking for? Voipsupply didn't supply it. I'm trying to verify that's what I need befor I start hounding them. -JB Hawaii John Bittner wrote: >John, > >You have to go to 7.1 before 7.3 >Also look at this.

So, after playing with 6.0 on the Cisco 7960 and 7940 platforms, I have the following gripes, which I've sent to a very clueful Cisco person already. Mind you, I love the Cisco 79xx series phones, and currently they are what I recommend to anyone who wants a 'real' IP phone. I just cringe - Speed dials. It's nice to now have speed dials in the line appearances that

Hello all, I recently purchased a Cisco 7940 IP phone to do some testing with (to validate a migration to asterisk for our internal PBX needs). I understand that I need to update the phone for it to support SIP, so I configured the phone with an IP address and pointed it at my tftp server. When I reboot the phone I am currently getting "TFTP File Not Found SEPDefault.cnf" in the

I really should be doing something better on this beautiful weekend, but I'm trying to save myself some time for later projects by documenting some things that have been particularly troublesome in the past. That being said... I've written up a configuration guide for the Cisco ATA-186, which describes some of the features that are possible to set in the ATA and specifically what

Hello I recently get a Cisco 7940G IP Phone and I try to make several things with it and I en counted many difficulties: 1.) I tried to unlock the phone and to set manually IP Address, Netmask, Gateway etc. I don't get any luck. 2.) I tried to upgrade firmware like they said with tftp server... I downloaded: P0S3-08-11-00.zip and I uncompressed the files in tftpboot directory. I don't get

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

Has anyone come across the Cisco ata 186 not passing *70? When I press *70, the ata just goes back to a dial tone. The strange thing is, its only *70 and not the reset of the 70's. *71, *72, etc all go through fine. I've tried removing the the dialplan all together from the ata to try and let it pass, but no go??? If I setup an IP phone to its extension, *70 goes through fine, so i know

I use cisco ATA 186 ( Version: v2.16 ) with sip protocol and asterisk as pbx. I need feature called as 'three way calling' or 'transfer with consultation'. Registering,calling and 'blind transfer' work fine. Is this feature provided by sip clients or by asterisk itself ? What I have to configure in ATA and what keys I have to press on my phones ? Three way calling is

For all thos Asterisk users not on the FWD list, it works for me!: -----Original Message----- From: Free World Dialup - The Future of Dialing [mailto:FWD@LISTSERV.PULVER.COM] On Behalf Of Leonidas Piagkos Sent: donderdag 12 juni 2003 0:58 To: FWD@LISTSERV.PULVER.COM Subject: Re: [FWD] FWD losing Registration Hi Don, All you have to do with your ATA is to set the following parameters as :

I've done something similar at home, but made my dialplan such that I can dial either 10 or 11 digits locally. I don't use a "throw away" digit at all. Any 7, 10, or 11 digit call will be appropriately mangled and sent out the PSTN / VoIP provider. ________________________________ From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On

Hello, I've got a Cisco ATA 186 from Vonage plugged into my Asterisk box with a X100P card. This works great for the most part, but I'm having a disconnect supervision problem. I suspect the Cisco device doesn't provide any sort of analog disconnect supervision when it gets a SIP BYE message indicating the far-end has hung up. This causes Asterisk to leave the channel up

This for the archives in case it may help someone: I was able to upgrade two Cisco 7940's from firmware P0030301MFG2 to SIP 7.1 as follows: 1. Installed 7.1 images from the Cisco zip file to the TFTP server. 2. Specified "image_version: P0S3-07-1-00" in SIP<MAC>.cnf and SIPDefault.cnf 3. For the older of the two phones, renamed P003-07-1-00.bin to P0S3-07-.bin, making it

I have an interesting problem. I am attempting to install a payphone utilizing a Cisco ATA-188. The payphone actually works, but there are some timing issues. What happens is you pick up the payphone and the ATA grabs a line and goes offhook. While you monkey with putting money in and dialing the number, you are eating up the time before you get the offhook reorder tones (or howler tones

I have a Cisco ATA-188 with two POTS phones and latest stable cvs. In any situations with call waiting (existing connection and calling again) the second call cause both calls to drop. This is the same for "internal" extensions and from external (ZAP and SIP). It seems to be a "502 - The transaction could not be executed, because the endpoint does not have sufficient

Hi all, do you know any firmware release which fixes that issue for cisco ATA186? ATA 186 3.x.x Cisco ATA 186 v3.* CANCEL requests can be sent with a completely bogus URI, making it impossible to cancel a call. bug no workarounds This is from: http://www.communigate.com/SIP/SIPProblems.html. In other words, you make a call, other side doesn't pickup, then you hang up,

i have been trying to get a newly liberated (from vonage) cisco ata-186 (sip ios v3.1) working properly with asterisk. my client is behind a linksys wrt-54g, which up to this point hasn't proven to be a problem (i have several sipura spa-2000's and polycom phones working just fine behind them). (i'm running cvs-head from yesterday). after looking at the various suggestions,

Hi! Can anybody help me with convert Cisco 7940 CallManager Phone to a SIP Phone? I have continious error in tftp log: connect from 192.168.1.111 Mar 18 12:12:30 AKrasavin utftpd[10081]: peer requests OS79XX.TXT, conversion octet Mar 18 12:12:30 AKrasavin utftpd[10081]: unterminated option value in init packet Mar 18 15:12:30 AKrasavin xinetd[10068]: START: tftp pid=10080 from=192.168.1.111 Mar

Hi people, I have a Cisco ATA 186 which understands only the SCCP protocoll, therefore I am a pure beginner and I hope that anybody of you could help me. How will I configure the ATA which has 2 analog ports? For any support I would kindly thank you Tamer

I see that there's now a 2.16.1 upgrade path for Cisco ATA-186 devices, dated (variously) July 11 or July 14 2003. Here are some interesting bugs that claim to be fixed. Most notable is CSCeb17953, at least from my perspective, as I've hit this bug before. CSCea42480 The Cisco ATA ignores the Require:100rel header and processes call. CSCea69889 The Cisco ATA builds a 302 Moved