similar to: Problem with ReceiveFAX app from FFA

Hi Guys, i am using the latest version of asterisk 1.4 (1.4.33.1), dahdi (2.3.0.1) and FFA (Applications: 1.4_1.2.0, Digium FAX Driver: 1.4_1.2.0). the issue i'm having is that i'm able to receive faxes from a website (that offer this service) but not able to receive from a regular fax machine (that is working perfect). [fax-rx] exten => receive,1,NoOp(**** FAX RECEIVE ****) exten

Hello. I've been trying to setup Free Fax for Asterisk on a Debian machine with Asterisk 1.8. I have managed to register and installed the Digium modules. Sending and receiving through it have resulted in failure. The output of fax show capabilities is: Registered FAX Technology Modules: Type : DIGIUM Description : Digium FAX Driver Capabilities : SEND

Hello users, Recently i have installed the free version of FaxForAsterisk and trying to work with it by sending a fax on T38. My version information is as follows i)Asterisk 1.6.0.20 ii)res_fax-1.6.0.14_1.1.6-x86_32 iii)res_fax_digium-1.6.0.14_1.1.6-i686_32 sip.conf [general] t38pt_udptl=yes extensions.conf [default] exten => _XXXXXXXXXX,1,NoOp(Fax Incoming Call) exten =>

Hi all, I have problem for receiving fax from multiple page fax that sent from fax machine (analog). The error is : WARNING T.30 Page did not end cleanly This is my dialplan [inboundfax] exten => s,1,NoOp(**** FAX RECEIVED from ${CALLERID(num)} ${STRFTIME(${EPOCH},,%c)} ****) exten => s,n,Set(FAXOPT(ecm)=yes) exten =>

We're having an issue where we call ReceiveFax in a context that includes a hangup extension and half the time dialplan execution doesn't continue after the fax is received successfully. Am I missing something simple here? Below is a sample call where this happened: The last log line for this channel/call is: [Feb 21 09:10:53] VERBOSE[13730] res_fax_digium.c: -- Channel

This message is pointed directly to Steve Underwood. I tought it would not be nice to directly email him with a question that interests a good part of the Asterisk community, so here it is. :) Steve, remember a few days ago when we discussed about issues on Asterisk 1.6.1.13 and T.38 fax reception? Well I opened an issue on Mantis (https://issues.asterisk.org/view.php?id=16756) and turns out it

Hello, I need to send a tiff via fax with my asterisk 1.6.1.0. I tried in the dialplan [default] exten => _X.,1,SendFax(/root/test.tiff) but I have: salledeconf1*CLI> console dial 111 at default [Dec 23 16:24:22] WARNING[31739]: chan_oss.c:492 setformat: Unable to re-open DSP device /dev/dsp: No such file or directory -- Executing [111 at default:1]

Hi, im using a Asterisk Server which is not behind NAT. First i had problems with the fax detection. But this is now solved after adding a wait(2) at the correct place. But i'm still unable to receive a fax due to res_rtp_asterisk.c:3548 ast_rtp_read: RTP Read too short after the Fax session has started. My sip.conf includes [general] allowguest=no alwaysauthreject=yes sendrpid=rpid

I am testing out inbound faxing using res_fax and res_fax_spandsp.so My system answers the call but then sets there on the ReseiveFax line then comes back with an error that it exceeded the maximum retries. How would I go about debugging this? Below is my very simple dialplan code I am using, and the fax show version gives the following as well. FAX For Asterisk Components:

Hi All, I seem to have stumbled on a bit of a problem. When trying to send a fax with Fax For Asterisk on 1.6.2.x (have tried 1.6.2.5, 1.6.2.7 and the current svn version, with FFA 1.2 I get a core dump each time. Here is an extract form the console: [May 12 22:47:09] DEBUG[22584]: app_queue.c:1084 handle_statechange: Device 'SIP/vltb-sbc01' changed to state '1' (Not in use)

I am testing Fax for Asterisk. But, I meet a problem. I try to Send a Fax (.tiff) from the first asterisk (Asterisk1) to the second asterisk (Asterisk2). Asterisk1 initiates an INVITE with audio G.711. Asterisk2 accepts this INVITE. Immediately, Asterisk2 sends an re-INVITE with T.38 to Asterisk1. But, Asterisk1 responds with "488 not acceptable here". I double check t38pt_udptl = yes in

Hello, Trying to set up res_fax_spandsp. Based on https://wiki.asterisk.org/wiki/display/AST/T.38+Fax+Gateway I wrote this in my extensions.conf: exten => 306,1,NoOp(Fax transmission) same => n,Set(FAXOPT(gateway)=yes) same => n,Dial(DAHDI/3) ----->FXS port to fax machine same => n,Hangup() Call flow Im trying to pull out is as follows: Zoiper -->

Hello, I have a question regarding incoming fax to local file (on the Asterisk server). While the fax is received properly (I have the tiff file generated as expected) I get the warning 'FAX CNG detected but no fax extension' on the consol. If the fax is received ok then what 'fax extension' does it expect and what should I do there? My Setup: Sender -> Public PSTN ->

Hello, I have Asterisk 1.6.1.12 with FAX For Asterisk Components: Applications: 1.6.1.5_1.1.6 Digium FAX Driver: 1.6.1.5_1.1.6 (optimized for core2_32) If I use call file with spool -------------------------------------------- Channel: SIP/IP/DEst No MaxRetries: 0 RetryTime: 10 WaitTime: 50 Application:SendFAX Data:/var/spool/asterisk/test.tif

Dears I installed digium fax and followed the instruction at http://downloads.digium.com/pub/telephony/fax/README,And as you can see above that t38 is loaded I am using a call file to send fax1.tif file as fax to the gateway named add The problem that Addpac send always Receive 488 Not acceptable here,and lkindly find my debug attached Please advice. Thanks I Advance shark*CLI>

Hi all, I've got a perl agi script that exec()'s the FFA version of receivefax to... receive a fax. However, after the fax is received, the script seems to die. This is what I have: $main::agi->exec("receivefax","/tmp/${$}.tiff|fs"); $main::agi->verbose("FAX COMPLETE",1); I never see the "FAX COMPLETE" message on the console, I've set

I am having troubles with sending faxes. I hope someone can help me work out a better method. Basically we have a special address that our users can send to. It winds up on our Asterisk server which runs a Python script that parses the message for attachments and the phone number from the recipient address. The attachments are converted to TIFF and stored in a folder with various information

Hi, I have been headbanging with asterisk and Jack for a while, decited to ask other linuxists for an advice. The problem is that Jack is compiled from source (0.118) in /usr/local/, but menuselect says "XXX" for it (cannot enable it). I need jack... Otherwise I will inotify Monitor WAVs, what is bad :`( After installing jack from sources: Add system-wide

I've been having problems segfaulting when receiving faxes. So I tried FFA. I used the register utility and my license is in /var/lib/asterisk : ls /var/lib/asterisk/licenses/ -l total 4 -rw-r--r--. 1 root root 325 Jun 5 22:41 FFA-DNCXXXXXXX.lic but: Executing [17772822954 at FaxIncoming:4] ReceiveFAX("SIP/ec2faxcall18-00000002",