similar to: SPA504G Unable to Transfer Established Call

Hi, We have a user who is putting large call volumes through Asterisk, and wants to BLF monitor up to 90 extensions. We are struggling to find a handset that can keep up with Asterisk :) 1) Is there a handset that will do this? 2) Is there a different (standard) way to send BLF and allow directed pickups? 2a) Or even a handset specific way? Asterisk handles the BLF volume fine, even on quite

Hello, I am struggling to have a SPA504G to auto answer (for intercom/paging). I have tried the following SIP headers (not all together), but without luck: SIPAddHeader(Call-Info:\;answer-after=0); SIPAddHeader(Call-Info: answer-after=0); SIPAddHeader(Alert-Info: info=intercom); SIPAddHeader(Alert-Info: Ring Answer); SIPAddHeader(P-Auto-Answer: normal); Any other ideas? Leandro PS I have set

exten => 179,1,SIPAddHeader(Call-Info:\;answer-after=0) exten => 179,2,Page(SIP/180&SIP/181&SIP/182&SIP/184) The asterisk11 page() application works great, but I've just learned that the person who initiated the page can transfer or conference the page if they don't hang it up before using those functions. It never would have occurred to me to try it, but a

I've got a problem that keeps popping up with my reception phone. It is a IP 650 and the receptionist - on three occassions - has accidentally hit the "Forward" softkey just before she enters the "Page All" keystrokes and then all future calls get routed as an overhead page. I will admit, the first time it happened, I was totally stumped. Why the heck did I have

We are having an issue with the SPA962/932 combo where the phone and the sidecar will reboot unexpectedly ? could be onhook, could be on a call, doesn?t seem to matter. I read that certain early firmware revisions could cause this so I?m running what was a week ago the newest available (5.1.18). A call to Linksys support suggested that I ensure that the phones are using a recent firmware version

I found on the web that there is way to customize the softkeys for the 7941/7961 phones. In the SEP<mac>.xml there is a section called "softKeyFile" where you can specify an xml file for the softkeys. I couldn't find any examples of this softkey file or the format to this file. Does anyone have a call manager enviroment where they can look at this file and send me an

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

Greetings all. First off, thank you for your time on this. I have spent literally 12 hours searching every forum and article I can find, and I'm going cross-eyed, so I need to bother everyone with this. I am running * 1.2.37, and I am trying to get the hints working, so I can turn one of my SPA962's LED's red when someone parks a call. I have used Button #3 on my SPA962 to

I've submitted to Julien http://chan-sccp.sourceforge.net/ my patches the diff file is attached to this mail Apply it to the CVS head cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/chan-sccp login cvs -z3 -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/chan-sccp co -P chan_sccp it does include: - added support to cisco 7905 - major buttontemplate rework. Added a validMask function

I have a Cisco 7960 running 7.2 of their SCCP image; I am running Asterisk 1.0.5 and using the latest Sourceforge version of SCCP2. When I make a call (or receive one) the "Transfer" softkey does not show up - as a matter of fact only 2 softkeys show up (redial & something else), but those even are not active. On a 7960 running SIP the Transfer and other buttons do show up and are

Hey Everybody, You may remember be as the one that was generally running in circles trying to get ADSI phones to work? Well, five phones later, I've got a phone and a code that works to program it. I have been discouraged from just posting it to an e-mail forum, but I have been encouraged to get it embedded in the program. Is this possible? How should it be done? Next, after getting it

Hello, I have tried to install this phone for hours now and I can't get it working. Maybe someone can help me :) I have searched for more info from everywhere but there isn't much about 7910 :( >From the CLI I get this: NAME ADDRESS MAC Reg. State ================ =============== ================ ========== telefon --

Hi, We are using Asterisk 1.2.1 with Cisco 7940 and 7960 phones. Most things are running fine ;-) But, when you are calling and you want to Transfer, you need to press first on the 'more' button (4th), then you have the label 'Trnsfr' to Transfer. these are the lables on the softkeys when having a phone call: "Holt / EndCall / Confrn / more" press more and you get

In the 1.4.x firmware release, there was a config file setting that would cause the screen focus to change to a new call that came in whilst a call was in progress. When set, presentation of a new call would cause that call to be selected, and the softkeys would display Answer, Reject, Forward. The 1.5.2 firmware doesn't seem to do this, despite the setting being set. In all cases, it seems

Is there any way to program a soft key in ADSI to put a caller on hold. Then able to retreive that caller. Example - Softkey Hold Softkey Retreive Call Softkey End Call -gcc

Only slightly asterisk related I suppose, but hoping someone has attempted this... I have an old installation with a bunch of IP501s, and one died. I replaced it with an IP450, and the user sorely misses his DND button. I hated those DND buttons anyway, as I couldn't control them centrally. I'd *like* to program one of his softkeys to send a *XX sequence to do DND on the

I'm no programming wiz, so I need some hand-holding on this one... I have a couple of programs used to update my phone. First problem was that they showed the wrong IP address for my PC. This I fixed by editing the /etc/hosts file with the right IP. In order for the update to work, you must enter the IP address of your phone. Every time I do this, they come back with "invalid IP

does anyone know howto set the softkeys of an Cisco 7960 running on an asterisk server via chan_sccp ? Mit besten Gr??en Dirk Rieger

I am trying to make PJSIP work with my Cisco SPA504G phone. I have no problems making it work with the chan_sip driver. When I configure my phone, it indicates the contact was added -- Added contact 'sip:7001 at 192.168.9.142:5063' to AOR '7001' with expiration of 3600 seconds Phone shows green light for the line. I then attempt to dial extension 1 and Asterisk crashes.

I'm trying to implement call parking with asterisk and Cisco SPA504G phones: features.conf parkext => 700 parkpos => 701-702 context => parkedcalls I defined one of the unused keys to park the calls: Key2: fnc=sd;ext=700 at 10.0.1.103;vid=1;nme=Park I also defined two other keys to pickup/unpark the calls: Key3: fnc=blf+sd+cp;sub=701 at 10.0.1.103 Key4: fnc=blf+sd+cp;sub=702 at