similar to: sig_pri.c:985 pri_find_dchan: Span 1: D-chanannel anyway!

Dear; Thanks a lot for guiding me. Is it possible that the installation libpri-1.4.11.5 newer than the libpri-1.4.11.5-patch? Well, when I typed (note: I am trying to apply the libpri-1.4.11.5-patch for the libpri-1.4.11.5): libpri-1.4.11.5# patch -p0 -i libpri-1.4.11.5-patch It gave me that patched detected as shown below (example of one file, and I got same for other files): patching file

Hi All; My ISDN was working fine, and suddenly I start getting the below: sig_pri.c:985 pri_find_dchan: Span 1: No D-chanannel anyway! There is a Yellow Alarm, so what it could be the problem? My configuration as following: system.conf span=1,1,0,ccs,hdb3,yellow bchan=1-15,17-31 dchan=16 chan_dahi.conf context=IncomingPSTN group=0 signalling=pri_cpe switchtype=euroisdn

Dear Doug; But I am afraid it is a bug because I read something this in the below link: https://issues.asterisk.org/view.php?id=17270 But maybe this was for old driver .. again, I am afraid if it is a bug. DAHDI Version: 2.4.1 libpri-1.4.11.5 Any advise if the below message is a bug? [Jun 15 16:14:00] WARNING[2773]: sig_pri.c:985 pri_find_dchan: Span 1: No D-channels available! Using

Dears; The problem was related to something else. The Digium card has two PRI ports, actually to get it UP, I have to configure the two ports and both of those two ports to take the timing from span 1. Why this, I do not know ! Although I am using only one E1 connected to span 1, so why I have to configure the other span !! After configuring the second span, so now one D channel for span 1 is

Hi Danny; Really I did not understand how I can determine if the IO will be DB or conf files? Is it from the Asterisk manager? Regards Bilal ------------------------- It depends on how you are configured. The gui interfaces using Asterisk Manager, so you get the Same IO from the gui that you would get from a native manager session. -----Original Message----- From: asterisk-users-bounces at

Dears; I am looking for the card that does not need an electrical power, which one? Is the PCI express doing this? Regards Bilal -------------------------- > While we're at it, can someone please tell me whether I > should be using > vi or emacs? ;-) > > Many thanks, > > Tom > > PS: Bilal: You have asked a nearly unanswerable question. > Some prefer >

I am talking about the SIP. Now the new mobiles (Nokia, Erecson, Panasonic, iPot, ... etc) all of them support SIP capability. They are able to register to any SIP server (by giving the IP address, username and password). Fring is one of the software that can be installed on the mobile devices and can register on the SIP servers. BUT, the new mobiles currently come with built in SIP (no need to

I need to select a line from the Zap group channel using the SIP Phone (not FXO and not FXS ports). ignorepat does not work? Also, what is the method to let the second dial tone has another tone frequency? Regards Bilal ---------------- No, ignorepat is for FXS ports (FXS ports use FXO signaling). Also, ignorepat does not apply to SIP phones, because SIP phones provide their own dialtone,

Dears; I do not know if any had experience in using speex or ilbc with IAX and got good results, because I am facing a problem with GSM. I am facing a noise problem when I am using GSM with IAX trunk as following: IP Phone (G711) ---> Local Asterisk Box ---> IAX Trunk using GSM codec ---> Remote Asterisk Box ---> Digium Card (FXO) to terminate the call to the destination While no

Dear Alex; Thanks alot for your nice help. This is if I need to let Asterisk register with another softswitch (so I used register =>), what if I need asterisk to send call for the softswitch without register to it (directly)? If I removed the register => then how it will distiguish the IP address in the "host" at the [sip_trunk] is the IP address of the softswitch that need to

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

Hi Steve; Currently with Dahdi, for the below configuration that we were using it in the rc.local, how it will be? I think there should be something new to be used instead of ztcfg, what it is? And what about other lines? They need to be changed? touch /var/lock/subsys/local /sbin/modprobe wctdm /sbin/ztcfg -vv /usr/sbin/fxotune -s /usr/sbin/safe_asterisk Regards Bilal --- On Thu, 5/1/08,

Appreciate the kindly help and advise. Regards Bilal --------------------- > > Bilal, > > I suggest you turn on logging on your tftp server to see > what files are actually being requested, and if the the tftp > server is dishing them out... Try adding a few v's to your > tftp setup: > > File: /etc/xinetd.d/tftp > Line to change: server_args = -s /tftpboot -v

Hi All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination

Hi All; Till now I am not able to find a good IAX IP Phone or Gateway that can be used with good quality. Anyone can advise for good one? Regards Bilal ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.

Hi List; I need to configure a softphone to be client and use it with Asterisk, which is the recommended one? Is it iax2? Regards Bilal ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.

Hi List; I read the following sentence: "The CLI prompt is set with the ASTERISK_PROMPT UNIX environment variable" In the following link: http://www.voip-info.org/wiki/index.php page=Asterisk+CLI+prompt The question is: what is the ASTERISK_PROMPT UNIX environment variable and where I can access it to change it? Also where I can find information about it? Regards Bilal Ghayad

Hi All; Anyone knows if there is an Asterisk version that setup can be stored in Database instead of the configuration files (.conf)? Any advise? Regards Bilal

Hi All; Anyone knows an IAX IP Phone works fine and tested? Does polycom support IAX IP Phone? Regards Bilal

Hi All; I need to know which version of asterisk to use, if to be 1.4 or 1.6 or 1.8? For example, when to decide that I have to go for 1.6 or I have to go for 1.8? Regards Bilal