Displaying 20 results from an estimated 1000 matches similar to: "Multiple cards using same IRQ - getting IRQ errors and hissing"
2003 Apr 14
1
S100U hissing noise..
Hi,
I have got a hissing/humming noise on my handset that is connected to the S100U USB device..
I was running a CVS version of * that was about 2 to 3 weeks old and had perfect quality.. But that HDD died on me so I reinstalled and used the latest CVS, now I have this sound that is best describes as a similar sound to the noise a cpu fan makes.. Like a high piched hissing noise..
Any one
2010 Mar 05
4
Syslinux 3.85 chain.c32 problem solved
Thanks to debugging information from Thomas Mieslinger, I have
root-caused the failure of chain.c32 in Syslinux 3.85. I have put out
Syslinux 3.86-pre1 and Syslinux 4.00-pre33 which fix the problem.
I expect to release a Syslinux 3.86 relatively shortly (ideally in the
next two weeks), with bug fixes only. I would like to figure out if
there are other bug fixes we can get in in reasonable time,
2010 Sep 08
2
Problem with new AEX800 card dying because of interrupt problems
Hello
I purchased an AEX800 card to replace the ageing cheap channel bank/T1
card solution a few months ago, assuming that it would be a more robust
solution for my small scale phone system. However, it appears to be
anything but that.
Originally implemented as a XEN dom-u virtual machine on a large server
class machine, using PCI passthrough to pass the AEX800 and a small
older TDM400, then
2011 Jun 09
1
Fwd: Re: ControlPlayback's options
Humm... Seems like my message didn't make it. Here we go again..
/Johan
-------- Original Message --------
Subject: Re: [asterisk-users] ControlPlayback's options
Date: Sun, 05 Jun 2011 22:19:18 +0200
From: Johan Wilfer <lists at jttech.se>
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
On 2011-06-05 19:54, virendra
2005 Jul 19
1
Re: ices2 "crashes" respectivley produces hissing
On 7/18/05, Christian Leitold <linux@leitold.info> wrote:
> I've just found out the problem also occurs when using darkice instead
> of ices2. Therefore, I guess that icecast2 is actually responsible for
> this strange behaviour.
This couldn't possibly be icecast's fault - icecast itself doesn't,
and can't, do any processing of audio.
Given that it happens with
2005 Jul 18
4
ices2 "crashes" respectivley produces hissing
Hello list!
I've recently installed icecast2 and ices2 on my Debian Sarge box, to
stream some musik for my local network. Basically, it just runs fine,
using my soundcard / ALSA as audio source. Unfortunately, there is one
BIG problem: after a certain amount of time (varies, can be a few
minutes up to an hour or so), ices2 just "crashes", thus producing a
terrible noise on the
2010 Dec 20
4
dahdi issue on digium AEX800
Hi All,
I have installed asterisk 1.6.2.8
Dahdi: 2.4.0
Digium card: Digium, Inc. Wildcard AEX800 8-port analog card
I have configured this card properly and it is working for calls too,
But there is issue of one way audio on this outbound routes only,
My voice is going to outside pstn number but i am not able to get their
audio,
I have disabled firewall, selinux is also off.
If I am applying
2005 May 12
3
Something every TDMP user should know
> They instantly got us to look at the output of zttest and we found that
this was (in their words) 'extremely low', with 'best' and > 'worst'
readings of 99.975586% and 99.963379% respectively.
Might want to give PCI latency setting a try, it helped for me. My ZTTEST
would drop occasionally to 99.95% until I set:
setpci -v -s 01:01.0 latency_timer=ff
2007 Nov 02
1
AEX800 (TDM800 Express) - not detected
I have a AEX800 PCI Express card - sort of a TDM800 with PCI-Express.
(or AEX844 - 4FXS & 4FXO)
I downloaded Asterisk Now - and have got this loaded on a new
motherboard (Intel with 3 PCI, 3 PCI Express - etc).
(Downside on PCI-Express is the physical support the express slot gives
(very little) compared with an 'old' standard PCI slot!!!)
With only this card in the box....
2008 Nov 17
4
Digium Card Noice issue
Hello all,
I am facing as serious problem when running asterisk in HP server.We are
developing application to make the outbound calls in PRI lines .We normally
uses IBM machine as our servers ,and it was working fine for all
installation.For the cost reduction we this time tried with HP server.
Model(HP proliant ml110).
When we make the calls the there is a lots of disturbance in the sound even
2007 Oct 24
7
Compatibility Issues with dell poweredge 1950 and TE110P card
Has anyone had any compatibility issues with a TE110P card installed on a
Dell Poweredge 1950? I noted the following error on the LCD display of the
Dell Poweredge 1950:
E1711 PCI PErr Slot 1 E171F PCIE Fatal Error B0 D4 F0.
The Dell hardware owners manual states that it means the system BIOS has
reported a PCI parity error on a component that resides in PCI configuration
space at bus 0,
2008 Jan 16
2
Difference between TE121 and TE122
What's the difference between the TE121 and TE122. I read the description on
Digium's site and it isn't clear to me.
Best regards,
--
Guilherme Loch G?es
Visite nossa loja virtual: http://www.shopvoip.com.br
Not?cias e F?rum sobre VoIP com software livre:
http://www.asteriskexperts.com.br
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2009 Jul 18
1
wcte12xp0: Missed interrupt
Dear asterisk users,
We want setup TE121 digium board:
Model: Digium TE121: VoiceBus technology allows the TE121 to use an
industry standard bus-mastering PCI Express interface.
http://www.digium.com/en/products/digital/te121.php
My platform
Server: HP Proliant 150 G5
OS: UBUNTU x86_64 GNU/Linux
Asterisk: 1.4.21.2
zaptel: SVN-branch-1.4-r4662M
When we enable zaptel driver for TE121, the
2009 Sep 04
3
T1 TE121 cable connected to a TN2464BP AVAYA card
Hello All
I am looking for the cable I need to create to connect a TE121 card with a
TN2464BP card (AVAYA ISDN Card), please let me know if someone have the
information about this cable, my asterisk CLI show this:
pri show span 1
Status: In Alarm, Down, Active
And the card is in red, so I am thinking the problem is the card.
Any idea???
Thanks
John
Teleperformance values:
2011 May 28
2
dtmf Caller-id detection before first ring
Hi dears,
I am from saudi arabia and using asterisk 1.6.2.13,Dahdi-2.3.0 and
Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) .
I am facing problem with detecting caller id before first ring.I
recorded the dahdi channel using dahdi_monitor command. Where I am
able to see and hear caller-id dtmf tones.
Pl tell me the procedure to upload recorded file if you needed.
Something I want
2011 Jul 04
4
stream rtp from asterisk
Hi!
Anybody familiar with streaming rtp from asterisk. Preferably with the
xorcom asterisk patch which streams rtp from asterisk to oreka audio
server. Any ideas will do just fine though!
Regards / Marcus
2005 May 15
5
zttest
I was browsing the applications developed in zaptel and came across
zttest.
After I run it, I get the following:
Opened pseudo zap interface, measuring accuracy...
99.975586% 99.987793% 99.987793% 99.987793% 99.987793% 100.000000%
99.987793%
99.987793% 99.987793% 99.987793% 99.987793% 99.987793% 99.987793%
99.987793% 99.975586%
99.987793% 99.987793% 99.987793% 99.987793% 99.987793%
2008 Apr 10
1
Set PCI device latency from domU?
If a PCI device has been passed to a domU is it possible to set its
latency from the domU or does it have to be done from the domO?
When I attempt to set a devices latency from the domU with setpci I do
not receive an error message back indicating a problem, however the
latency as viewed with lspci -v is not changed. The same setpci
command from the dom0 successfully changes the latency and the
2012 Mar 20
1
Cut off + sign in telephonenumber
Hello,
I'm trying to cut off the "+" sign if part of a telephone number, but
not succeeding :
exten => test,n,Set(cid=+99999600)
exten => test,n,Set(regx="([0-9])")
exten => test,n,Set(cid2=$["${cid}" : ${regx}])
exten => test,n,NoOp(cid2=${cid2})
cid2 is empty afterwards...
What I want is to make sure there are only numbers and no other
2009 Sep 28
1
TE121P Blue Alarm/Recovering
Hi All,
I have a TE121P card installed and since connected it to the PRI I keep
getting the Current Alarm as continually changing from Blue
Alarm/Recovering and Recovering.
The config I have is:
/etc/dahdi/system.conf
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
loadzone = cn
defaultzone = cn
/etc/asterisk/chan_dahdi.cfg
[channels]
Context=telco