similar to: [OT] 802.11x roaming

# dd if=/dev/zero of=/srv/xen/webserver.img oflag=direct bs=1M seek=4095 count=1 # dd if=/dev/zero of=/srv/xen/webserver.img oflag=direct bs=1M count=4096 root@debian:~# grub-install /dev/xvda Searching for GRUB installation directory ... found: /boot/grub The file /boot/grub/stage1 not read correctly. Darkbasic _______________________________________________ Xen-users mailing list

Distro: debian unstable Xen version: 4.0.0-2 This is the config: #HVM #still no qemu-dm in debian #kernel = "/usr/lib/xen-4.0/boot/hvmloader" #builder = ''hvm'' #memory = 2048 #name = "webserver" #vif = [''bridge=eth0''] #disk = [''tap:tapdisk:aio:/srv/xen/webserver.img,xvda,w'',''phy:/dev/cdrom,xvdb:cdrom,r'']

Do you know if squeeze has xen support? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I explain what I want to do.. All the operators share their phones. The number of the operator isn't constant, so it's possible that two operators share all the phones. They need to move all around, so they pick up the first phone they find. If there are only few operator is very annoying for them to ear the other phones ringing while they are at the phone! So I'dd like to limit

Package: xen-hypervisor-4.0-amd64 Version: 4.0.0-1 Severity: grave The only thing I can read is: ERROR: Unable to locate IOAPIC for GSI 2 ERROR: Unable to locate IOAPIC for GSI 9 ERROR: Unable to locate IOAPIC for GSI 9 cannot read /etc/fstab: no such file or directory mounting [...] failed: no such file or directory I boot with: moltiboot [xen] module [kernel] root=[uuid or device] ro quiet

Hey all, I have moved 10_Linux to 50_Linux and ran update-grub which is fine. The problem I have is that there is xen-syms in /boot And that is being put first in the boot list which is incorrect. How do you make /xen.gz at the top so it is booted first? Thanks Ian _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hi, this is an old outstanding problem, unfortunately I don't remember how to walkaround it. I use asterisk 1.8.3 and I have a public IP in my network interface. As soon as the Internet connection goes down, phones stop working. I want to be able to use pstn, isdn and the gsm gateway even if the Internet connection goes down, how can I achieve it? Thank you, Darkbasic

Hi, I'm trying to configure two APs with a Wifi phone to allow fast handover. I would like to know how to configure them. Should I use the same ESSID and Channel on both ? Suggestions about a good wifi sniffer ??? Is Commview the best option ? Thanks, Luis A P Barbosa -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Do you if a DECT-GAP (or DECT-CAP) compliant handset MUST or MAY support roaming and handover and are these functions transparent for handset (then, these functions are implemented in DECT base stations) ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080110/4254f602/attachment.htm

Hi, I'm working on a Wifi VoIP project specification. It will have almost 8 APs and 20-30 wifi phones. And after some research, I still having some questions ... 1) Are Managed Access Points (and switch controllers) really important to implement good wifi woip (w/ low latency and acceptable handover time) ? 2) What is the difference between (3com WX1200 + 3com AP 3750) and (DES-1228P +

Anybody care to muse on Wi-SIP vs. SIP-DECT? My limited research indicates that none of the WiSip phones will ever be able to match the performance of DECT phones. Maybe I'm wrong but a Wi-SIP phone seems like a DIESEL sports car. There is nothing wrong with the technology, but it seems like a shoe-horned fit into the requirements of a wireless endpoint. DECT uses a wireless radio layer

Hi folks, The recent mention of DECT on this list has got me thinking....... (yeah dangerours!) I have very little experience/knowledge with DECT and mainly where I have seen it used in a multibase base situation where handoff between bases occurr. This has been and ericsson system used as an adjuct to an ericsson pbx on a large multistorey property. If I remember correctly the bases are fed 2

Hello everyone. I know it's a little bit off-topic, but I was just wondering... Has anyone ever had any experience with asterisk, a wi-fi meshed lan (with more than one access point) and wi-fi sip phones? I made some tests but I'm not really satisfied.... Wi-fi phones are a curse (as far as I know even Nokia eSeries -I personally own an e70 model- have their flaws): - random sip

Heya list, I need some advice/experience. Some of our customers are asking us about DECT solutions for their asterisk install. Some others will not go to asterisk if there won't be a DECT solution. They now have a Siemens or a Samsung PBX. Those PBX-es come with a DECT basestation and optionally repeaters etc. All those basestations speak some own protocol to the PBX, so we cannot use them

I noticed it by chance while digging into the code, I think it's a great news! Darkbasic

Hi, I continue the discussion from https://issues.asterisk.org/view.php?id=19103 If T.38 reinvite detection should still work, why it doesn't? If I use faxdetect = t38 it does never detect the fax, even using alaw. Cheers, Darkbasic

Hello, I have a Linux server acting as a Windows PDC and we're using roaming profiles. Wired clients connect fine and upload/download their profiles. Wireless clients do not. I also have RADIUS running on the Linux server and the Wireless AP is configured to authenticate against the RADIUS server as well, using the windows login information. I enabled verbose debugging on the RADIUS

We've deoplyed a number of pure VoIP wireless (wifi & proprietary) phones, but not dect. Is there a simple overview of integrating DECT phones with Asterisk somewhere? I assume the DECT basestation has a multi-account SIP VoIP interface, and the handsets are just plain old dect? Can you push configuration info to individual phones? (Are they individually addressible / configurable

Hi, I am investigating getting a wifi VoIP phone because its may be a better option than an ATA and a cordless phone.. Does anyone have any experience with the whats out there?? Do they support things like WPA etc?? I have heard the battery life can be a problem.. Is this the case? Thanks..

Retrying, falling of the list some how :-( -------- Original Message -------- Subject: feeling n00b again Date: 2018-08-20 09:51 From: asterisk at a-domani.nl To: asterisk-users at lists.digium.com Hi all, Long time ago, I followed a Asterisk training, and both at work and at home, was able to deploy Asterisk, make all sorts of internal call (hard/soft voip-phones, incoming/outgoing,