similar to: moh questions - quality and semi-streaming

Hi, Has anybody else noticed that MOH does not play on parked calls in 1.6.2.14? Or is it just my setup? MOH seems to work in every other respect (Call Held or in-Queue), but when a call is parked, the logs show MOH being started, but the parked party hears nothing. The verbose logs show the following. Any thoughts on whet to check next? Thanks, Steve ### Call comes in here and is answered

The setup is this: 2 sip handsets (a Cisco 7960 and a 7961) exten 401/402 1 fxs/dahdi cordless phone, exten 201 rhino fxo/fxs analog card asterisk 1.4.31 This is running on a Soekris 5501 with Astlinux 0.7.2 While I do have FXO capabilities, no POTS lines are connected. When a call comes in (VoIP, either SIP or IAX) it is usually answered on one of the SIP Cisco phones(x 401 or 402). If it is

We are running Asterisk 1.8.5.0 with an uptime of 40 weeks. Just today our streaming music on hold stopped working. I remember when we had first installed 1.8 we had an issue where the streaming music on hold would not work because Music On Hold was using the DAHDI timing module. We needed the DAHDI timing module loaded so that paging would work. However, at that time we upgraded to 1.8.5.0 and

I have had this problem for a while, so I can't be sure when it started or what was changed. The setup is this: 2 sip handsets (a Cisco 7960 and a 7961) exten 401/402 1 fxs/dahdi cordless phone, exten 201 rhino fxo/fxs analog card asterisk 1.4.31 This is running on a Soekris 5501 with Astlinux 0.7.2 While I do have FXO capabilities, no POTS lines are connected. When a call comes in (VoIP,

Anyone have Windows Media streaming for MOH working? I followed the various procedures on the Asterisk Wiki for using mplayer which seems to be the only Linux player capable of playing windows media streaming audio (asf, wmv etc.). Anyone get this working? I can get shoutcast streams working using mpg123 but so far no luck with windows media streaming. Is there another player out there or a

Is it possible to start MOH when calling to DAHDI Channel that has ISDN E1 connected with it. When the called party press hold on his phone then asterisk start MOH?? -- Regards, Shariq Khan 0333-3501125 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110407/ca6cfc50/attachment.htm>

Does anyone have any opinions on the music on hold quality over G729? The stock files seem to sound terrible over it, this is enhanced further by calls coming from the PSTN via a Zaptel gateway. I am only using the stock wav files and have not attempted to use much else so far. I've ruled out timing issues on the system generating the MOH itself (ztdummy on the PBX itself, our Zaptel gateway

Where can I find alaw, ulaw, gsm, g729 formats for native music on hold? I have some mp3 files and I have tried to transcode them to above, but it seams that SOX can't do that. Please, tell me where to download some MOH files (in above formats) or how to transcode mp3? Thank you for your time! -- Tomislav Parcina tparcina#lama.hr

Hi list, I've always about 50 concurrent SIP callers listening to several MOH streams (fed via mpg123) on Asterisk 11.4.0, 4x 2.2 GHz and the CPU usage is always at about 250% causing stuttering of the streams and delays when using Read() and Playback() (overall everything is just really slow/delayed). I've seen Asterisk doing that when the MOH stream that was fed via mpg123 was

I am having trouble getting streaming MOH to work. As far as I can tell I have everything configured properly but there is only silence. Your help is appreciated. I am running Asterisk 1.8.11-cert10 with mpg123 1.12.1 to play the stream (I have tried madplay, and mpg321, and I compiled streamplayer as well with the same results). I started by finding a working stream and tested this from the shell

I was copying tracks from CD into mp3 files so that I could use it in Asterisk 1.4.21.2 MOH. (BTW, I have already secured proper license to play MOH to callers.) I used MS Media Player version 11 and rip it at 128kbps (smallest) but whenever I listen to MOH, I saw the following message on the Asterisk console. WARNING[20829]: mp3/interface.c:215 decodeMP3: Junk at the beginning of frame 49443303

asterisk v1.0.3, mpg123 v59r, shoutcast server. When first starting asterisk all is fine, moh/mpg processes start, can see asterisk client connections on shoutcast monitor as well and I've got mp3 streamed music on hold, cool! After aprx. 32-105 seconds the asterisk client connections close on the shoutcast server. The moh/mpg processes are still running, but are now just looping a

I know that the 'fix' has just been applied (https://issues.asterisk.org/view.php?id=18262) - but why does it stop the moh only to start it again? This, also, seems to cause a CDR problem (see below). -- Executing [7000 at chambers:1] Park("SIP/2000-00000008", "") in new stack == Parked SIP/2000-00000008 on 7001 (lot default). Will timeout back to extension

Hi, I've tried a few times wiki instructions for setting up a streaming MoH, by creating stream.mp3 file in ../moh/stream folder. It never worked. I need to setup streaming MoH and please if someone has a working example, please help me to set it up. -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've tried a number of solutions, but I've been unable to get Asterisk working with streaming MOH without running into the "buffer" issue. I've tried using various combinations madplay, mpg123, mpg321. I've also tried streamplayer by itself, and in combination with play-fifo ( http://www.freeswitch.org/asterisk_stuff/play-fifo.c ) to try and eliminate the issue. For

So, Tilghman has put a particularly useful patch in the bugtracker: streaming music-on-hold is now supported. You can now specify .mp3 streams to be played back as MOH in the various places where MOH is used. Hopefully, Mark will install into the main CVS tree shortly. http://bugs.digium.com/bug_view_page.php?bug_id=0000413 This allows you to use the very sophisticated mp3 streaming audio

Hi, I have a customer running a 120 second long WAV file on their MoH. The problem is that it's always starting from the beginning, so people being put on hold, talked to, put on hold again, etc always hear the first 10-15 seconds. Is there a way to have Asterisk MoH remember where it left off? Or at the very least just play the same stream to all people using the same MoH class, so

Hi ! :) Does someone have an idea of the reason why my MusicOnHold (with clean mp3 downloaded from http://aussievoip.com.au/wiki-MOH) is always having interruptions and micro-cuts ? No high load of the system, no swap, no hard disk r/w, mpg123 seems running well... nothing ! Except a little message at startup : "Warning, flexibel rate not heavily tested!" I'm getting

We just finished an upgrade of our Asterisk system to an HA environment on a pair of servers using Linux-HA. As part of the upgrade, we also moved to Asterisk version 1.8.4.3 Most things are working quite nicely on the new system. However, I?m having trouble getting a paging feature to work. In Asterisk 1.4, we simply used the Page() application like this:

Thanks for the feedback. I do agree with having multiple smaller servers. When I was first approached with this task I mentioned as much. However, the current desire is to work with already existing hardware. That is out of my hands at the moment unless it just can't be done. I will explore Freeswitch a bit soon to compare it as well. I am struggling to find what the bottle neck is in