similar to: Asterisk PRI back-to-back connect

Following is my scenario to connect back to back PRI of two asterisk server. PRI cards are Sangoma A102D [Asterisk1]------------[PRI]-Cross Cable---------[Asterisk2] Asterisk1 ; Span 1 (MASTER) switchtype = national ; commonly referred to as NI2 context = from-pstn group = 0,24 echocancel = yes signalling = pri_net channel => 1-23 Asterisk2 ; Span 1 switchtype = national ; commonly

Is there any integration for ACT! and asterisk? I've googled for hours and haven't been able to find anything. Thanks David [cid:image001.png at 01CBE88E.66E8E450] -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110322/ecc019cc/attachment.htm> -------------- next part --------------

Hey Guys, I knew this is stupid question but i just want to know what is the difference between Queue member logged out vs Pause ? -Satish -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110321/7646a66b/attachment.htm>

Hey Guy, I have quick question. I am purchasing Sangoma A102D card but i am confused between PCI and PCI Express. Which card would be good for me. Definitely PCI Express is advance but i just want to know is there any major difference, like quality, performance etc.. -Satish -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I am having issues sending and receiving fax on my asterisk setup. Currently I have a server that has 2 x E1 TDM cards one is sangoma and the other one is openvox. Both support echo cancellation. One of the e1 is connected to our telco provider via mfcr2 where all our incoming calls originate. On the other end is a pri connection going to HICOM PABX where the local attached to a fax is

Hi! My customer want's to allow calls to landlines in EU and US and disallow calls to cells in EU. Rest of countries are blocked. Country blocking is easy... Is there a service that allows checking phone number? Maybe some specific Enum? I ask for number and server responds with info, for example: "Cell Phone, Belgium" or "Land Line, Germany". -- Piotr Gorski

Hey guys, Currently we have non HWEC sangoma pri card but now we are planing to replace card with HWEC support card for echo cancellation. So in this case do I need to re-install everything? Like zaptel, asterisk etc.. Or just replace the card? -- Sent from my iPhone

Hey! I am installing Sangoma A102D wanpipe driver and i got following error. what is this ? why dir isn't there ? wanpipe-3.5.16 # make dahdi DAHDI_DIR=/usr/src/dahdi wanpipe-3.5.16 # make install ....Send .... .... Installing Wanpipe Firmware update utility in /etc/wanpipe/util/wan_aftup install -D wan_aftup /usr/sbin/wan_aftup install -d /etc/wanpipe/util/wan_aftup/scripts install:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! Are hints not yet implemented in res_jabber? I have this here: exten => 3000,hint,gtalk/gtalk_account/mari.xxxxxxx at gmail.com But the hint doesn't show any difference. It always shows online on the phone and core show hints always shows that: 6003 at internal : SCCP/6003 State:Unavailable Watchers 0 6002 at internal :

Hey Guys! I am getting this wired error when i am calling IAX trunk. Everything works! but i want to get rid on these RED WARNING messages.. what is wrong here ? I have func_aes.so module loaded. also i remove and test but still same error. -Satish == Using SIP RTP CoS mark 5 -- Executing [7623 at from-sip:1] Macro("SIP/7527-0000000d", "orasebcamdial,7623") in

I recently noticed that asterisk is not logging unknown sip connections. I'm not sure if I've broken something or if asterisk itself has been broken. the last entry I have is: /var/log/asterisk/messages.9:[Feb 10 23:58:48] NOTICE[9868] chan_sip.c: Registration from '<sip:22942 at 10.0.0.3>' failed for '10.0.0.228:5060' - No matching peer found my logger.conf

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, has anyone managed to establish an XMPP connection to the facebook Jabber servers? I'd like to send messages on missed calls vie FB. - -S - -- (o_ Stefan Gofferje | SCLT, MCP, CCSA //\ Reg'd Linux User #247167 | VCP #2263 V_/_ Heckler & Koch - the original point and click interface -----BEGIN PGP

Hi folks, I repeat "as is" the title of a post someone did a few months ago, since I am facing the same problem and did not see one single answer to his post. Maybe I'll be a little bit more lucky. When I'm trying to issue an Atxfer AMI command, in the asterisk 1.8 branch, what happens is that some DTMF's are sent, like this : [Mar 22 15:46:27] DTMF[5910]: channel.c:3900

I am becoming frustrated with our current VOIP provider. Does anyone have any suggestions for a provider that supports asterisk well and provides solid service? Voip-info.org has a husge list of providers, but it is impossible to tell the fly-by-night operations from the reputable providers. --Brent -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hey Support, I am planing to implement new page system with asterisk 1.8 we have 200 SIP calls and page() will overkill my system if announce in one shot. so i am planing to record and play page over 50...50...50 chunk.. I am planing to do with .call file for auto calling after record message but i don't know how to call multiple extension ? and how to use page() with .call file for

I have asterisk 1.8.2.3 + A102D Sangoma card 2 port T1. when i am starting asterisk i am getting this error on console. func_callerid.so => (Party ID related dialplan functions (Caller-ID, Connected-line, Redirecting)) == Registered application 'PrivacyManager' app_privacy.so => (Require phone number to be entered, if no CallerID sent) == Registered custom function

Hey Guys! We had echo issue before so we replaced old PRI card with Sangoma A102D HWEC. Now my question is i set rx/txgain level 0.0 default do i need to touch this value or default is best. I have read on google and people say it should around 14844 on ztmonitor for rx/tx level same. I just use milliwatt and test my default 0.0 rx/tx level and it come around 4600. Do you think i need to make

Hi ALL, After upgrade 1.8 my MWI wasn't working I do have setting in voicemail.conf. Do i need to do anything else to fix my MWI on polycom 501 ? It was working with 1.2 asterisk. pollmailboxes=yes -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110608/e1f59a92/attachment.htm>

Hey Guys! We had migrate asterisk 1.2 to 1.8 now big issue is queue system. Before we had 3 queues and we were using AgentCallbackLogin but now its quite difficult to use AddQueueMember. Is there any easy way to logged into multiple queue using AddQueueMember ? and restrict agent for specific queue ? -S -------------- next part -------------- An HTML attachment was scrubbed...

hi: our current connection is below: sip phone<--->asterisk<---->alcatel PBX<---->PSTN asterisk and alcatel PBX is connected via E1 isdn-pri. when I use sip phone to dial outside PSTN world: 1. with 1.4 it is fine. 2. with 1.6.2, I need to set prematuremedia=no is sip.conf. or sip phone can not hear the ring and the beginning of the PSTN voice. 3.