similar to: [1.4] Failed callfile doesn't jump to "failed" extension

Does asterisk support using an H.323 provider for outgoing calls? From everything I have found, it looks like it does. However, I have had no success in getting it to work. I would really appreciate if somebody could give me a hand. I am using the channel that comes with asterisk. I have also tried using the channel from inaccessnetoworks but have not had any more success. My provider

Hi all, I've got a program that creates a callfile and most if it working great. However, when a call fails, I'm trying to capture the reason, which I'm told should be in the ${REASON} channel variable. http://www.voip-info.org/wiki/view/Asterisk+auto-dial+out Here is an excerpt from the callfile: Channel: local/155555555 Callerid:Tests <155555555> MaxRetries: 0 RetryTime:

Arch = x86_64 OS = CentOS-6.4 (freepbx) Asterisk = 11.4.0 FreePBX = 2.11.0.2 Snom870 Handsets We are in the process of moving to an Asterisk based PBX. At the moment most things work as we wish. However, I have just notices that when I force a reload using 'amportal a reload' I see this loop start in 'asterisk -rvvvvvvvvvv': > Channel Local/s at tc-maint-000002a4;1

Greetings!! We're getting some strange results using call files.. no matter the technology, DAHDI, SIP, etc., we get a "Call failed to go through, reason (3) Remote end Ringing" message when attempting to originate a call from a call file. Numbers changed to protect the innocent.... using call file.... //------------CALL FILE------------// Channel: DAHDI/g1/918005551212

I am using Realtime extensions as well, in case that would matter. Following problem arises from time to time, a call will successfully terminate: [May 14 14:31:41] VERBOSE[3274] pbx_realtime.c: -- Executing [t at project_init:1] Hangup("SIP/peer-2-00002f7e", "") [May 14 14:31:41] VERBOSE[3274] pbx.c: == Spawn extension (project_init, t, 1) exited non-zero on

Hello No matter what I try, Asterisk still fails dialing back through a callfile built through an AGI script. The whole thing works fine when the original call that triggers Asterisk is from an internal extension (Xlite), but it fails when it's from my cellphone ringing through the FXO/Zaptel port and I want to wait a few seconds and call back through the FXO/Zaptel. Could it that even

Not able to get the auto dialer part of asterisk to work with the zap channel. It works great with the sip channel. Here is the call file and the CLI output Call File Channel: ZAP/G1/6144994925 MaxRetries: 3 RetryTime: 40 WaitTime: 2 Context: amaxx Extension: 36652 Priority: 1 CLI Output Connected to Asterisk SVN-branch-1.4-r57207 currently running on VoIP-PBX (pid

Hello, I am trying to get MWI working after integrating Asterisk with CCM.I have followed the instructions in http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Voicemail+IntegrationMy problem is that I don't see externnotify's script being called at all in the logs, and not sure if I miss something here! In Voicemail general I addedpollmailboxes =

Good afternoon list. I am experiencing a problem with the CDR and callfiles. What is happening is this: When generating a call with a callfile, everything works perfectly, but the CDR is recorded in the table when they answer the call destination. The field disposition is being recorded correctly, but the duration field is marked with the ring time and billsec is marked with 0. This just happens

Hi list, To make outgoing calls by skype i would like to have our crm app create callfiles like we do for normal calls. If i read the instructions it says this : ---quote--- The syntax for making an outgoing call using Skype for Asterisk is as follows: Dial(Skype/[<originator>@]<destination>) ---unquote--- So i create a callfile that looks like this: --- Channel: SIP/228

Hello, I'm trying to call different SIP-accounts to connect them to a conference. This is my call-file : Channel: SIP/test3&SIP/test1 MaxRetries: 2 RetryTime: 60 WaitTime: 30 Context: from-conf Extension: 1000 I get the following in the CLI : [Mar 22 14:40:26] -- Attempting call on SIP/test3&SIP/test1 for 1000 at from-conf:1 (Retry 1) [Mar 22 14:40:26] WARNING[29908]:

Hi all, I am trying to setup the SMS of Asterisk. I have a Siemens SMS enable fixed phone which connects to my Asterisk through PSTN. Currently, I can use my fixed phone to edit and send messages to the Asterisk. However, I cannot make my Asterisk to send messages to the fixed phone. The SMS command displays TX and RX records, hang for a while and then stops with non-zero exits. I read

I've been trying to configure an E1 in Mexico using unicall, i went into vozdigital, googled this list, and finally followed this instructions: http://voip-info.org/tiki-index.php?page=Asterisk+MFC+R2 I have 10 PSTN numbers and 10 "lines" assigned, so i only have 10 "channels" assigned from my telco. However when i try to simulate a call using this call file: --------call

Hi! I am trying to do a callfiel for autodialing but when I move the callfile to outdialing folder asterisk seems like if did the call but it doesnt. I put here my callfile and that I get when asterisk begins to do the call If anybody has idea, pls. Tell me TIA ;;----CallFile----- Channel: Zap/g1/8093908270 Callerid: 8093908270 MaxRetries: 2 RetryTime: 300 WaitTime: 45

Hello I'd like to configure Asterisk so that... 1. I ring it from my cellphone with CID number displayed, just to notify Asterisk that I wish to make a call 2. Asterisk waits until I hang up, calls me back, and prompts me for the number I wish to call 3. Asterisk puts me on hold through Flash(), which is apparently the equivalent of hitting the R key on European handsets 4. Asterisk calls the

I am getting this error from call manager (4.0) and asterisk 1.2.4 I have canreinvite=yes on the call manager setup. I can call into the asterisk box from call manager. THat seems to work. When I am calling out of the box using a call file I see this entry from call manager... What might be the problem with my setup? THanks, JErry ---------------- <Date>03/06/2006

Hi, I'm trying to use Asterisk to place Automated Voice Calls. A verbose log from Asterisk CLI taken when I place a call in the spool directory looks like this: -- Attempting call on SIP/MTN-NEW/my-number for application MP3Player(/myfile) (Retry 1) == Using SIP RTP CoS mark 5 > Channel SIP/MTN-NEW-00000005 was never answered. [Jul 20 10:52:11] NOTICE[14580]: pbx_spool.c:339

Hello Asteriskers, :-) We're trying to set up an outbound notification calling for system alerts with Asterisk 1.4.0. We generate a call file in /var/spool/asterisk/outgoing and the outbound call is originated through Zap/1 (Sangoma A200D to a Canadian POTS line). The problem is that Asterisk does not wait for the other side to answer before it starts playing the message. So the

I am using asterisk 1.4.21 with outgoing call files. I am call a line that is busy as you can see below. How can my AGI ask what the status of the last call was so I can tell if there was NO ANSWER or it was BUSY? Thanks, Jerry -- Attempting call on SIP/401 for smvoice_callprogress at smvoice-dialout:1 (Retry 1) -- Got SIP response 486 "Busy" back from 192.168.1.161

I'm using Slackware 11. I unistalled the package that provides libtiff 3.8..... and installed the most current 3.7.... for lib tiff. I downloaded asterisk 1.4 beta3 and the 1.4 beta2 addons and untared them. created a simlink: ln -s asterisk-1.4.0-beta3 asterisk I've compiled spandsp from as follows cd /usr/src wget