similar to: problem with crashing Asterisk 1.8

Hi, I'm using Sangoma's wanpipe together with dahdi, all software downloaded today at most recent version. Hardware is Sangoma A104, a 4xE1 card. Installation went well. Anyway, wanrouter status shows a different result than dahdi_tool or dahdi_scan. I've just put a hardware loop on port 1. All the other ports are open. wanrouter status shows the expected result: Device name |

Hey Guy, I have ubuntu 10.04 64bit and compiled dahdi / wanpipe 3.5.19 /asterisk-1.8.x I didn't understand what is the relation between wanpipe and dahdi ? do i need to start wanrouter service ? I am getting weird errors and my system got kernel panic many time when i restart dahdi service. any idea ? what is the startup sequence of all these service ? root at example:/etc/asterisk#

Hi, Does anybody have an idea as to why dahdi_test results drop to unacceptable levels after doing a wanrouter stop/start using a Sangoma card? See below that it drops from 99.99% to 98.55%: [root at bin]# dahdi_test Opened pseudo dahdi interface, measuring accuracy... 99.999512% 99.992874% --- Results after 2 passes --- Best: 100.000 -- Worst: 99.993 -- Average: 99.996193, Difference:

Hi Everyone, We are using two Sangoma U100 (USB FXO) units connected to an Acer Aspire Revo (little PC running on Atom). The units work beautifully except for Monday :-) It maybe a conincedence or maybe the fact that Saturday/Sunday is off and something happens where one of these U100 modules goes into sleep and that's when all the 4 Dahdi channels are lost. So, I have been getting Monday

Hi, Has anyone ever experienced crosstalk with sangoma analogue cards on 64bit? We have exhausted every test to try and replicate this and find a solution with Sangoma tech support, but we can not fix it. We are about to try the card and four *seperate* UK BT lines in a 32bit system. The current system is a 4gb, dual core cpu with pbx in a flash 1.4, Zaptel and Asterisk 1.4.21-2 Currently we

Hello, We are having issues with a NEW Sangoma A108D: -- Executing [691918892 at pbx1:1] Dial("SIP/xtravoip200-009d24b0", "DAHDI/g0/691918892|30|m") in new stack [Oct 1 10:04:43] WARNING[14171]: channel.c:3170 ast_request: No translator path exists for channel type DAHDI (native 76) to 256 [Oct 1 10:04:43] WARNING[14171]: app_dial.c:1237 dial_exec_full: Unable to create

Im trying to install and configure sangoma ... every thing is OK but when type the command "wanrouter start" the following error apears: wan Driver not found. Thanks for any help

I have installed Asterisk on a CentOS4 box and then installed Asterisk from CVS. I installed a Sangoma A101 and connected it to a Adtran 600 using a T1 Crossover cable. The 600 has 12 x FXS, 12 x FXO interfaces. I ran through the wanpipe install instructions and configured it, now I can run [root@altpbx asterisk]# wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info

In my Asterisk CLI I get Ring/Off-hook in strange state 6 when i make a call into the system, the system claims to answer the call, and do the things in the dial plan, but I just hear ringing on the phone I'm calling in from. I am using a Sangoma A200 4 Port Analog card. my wanrouter version: WANPIPE Release: 3.3.6 asterisk -V: PBXtra Core fon_o_1.2.17 Any ideas? Daniel Lockard

I've been using Asterisk 1.2.6 with a 4 port FXO Sangoma A200 card for the past month without many problems (other than the fact that the Sangoma card doesn't disconnect hung up calls immediately, which I posted about in another thread, and has still not been fixed), however, I had a call from one of our clients today and they complained that our phone system kept ringing through when they

Hello, I have a Sangoma A101 connected to an ISDN30 (E1 in the UK) with some Snom 300 and Idefisk softphones. I can do SIP and IAX2 calls just fine, however I cant get any audio in either direction on the Zap channels. When I call in or dial out over the ISDN30 (UK E1) I can see the call answered/placed on the CLI and then silence follows. I've been provisioned 25 out of the 31 channels only

So i successfully upgraded my Debian vm''s to Debian 6 on XCP 1.0, but when i try to install a new clean one it always fails. Why is this? The VM won''t even start, while i used the Debian 6 squeeze template. Is this even possible? Thanks, Peter _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Trying to install wanpipe 3.5.18. No errors during compile. But when I reach the point where wanpipe and dahdi_cfg is started, I encountered an error. Starting WAN Router... Loading WAN drivers: wanpipe done. Starting up device: wanpipe1 wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid

Hey, Is it possible to covert a .img to a xva? I have a virtual machine on a xen machine that i would like to run in a xen cloud. I used the xva.py and it gave me a xva + kernel i followed the copy instructions but i get this: [root@box ~]# xe vm-start vm=converted Error code: WARNING: /dev/xvda is not a disk image Error parameters: Traceback (most recent call last):, File

Hey, Is it possible to covert a .img to a xva? I have a virtual machine on a xen machine that i would like to run in a xen cloud. I used the xva.py and it gave me a xva + kernel i followed the copy instructions but i get this: [root@box ~]# xe vm-start vm=converted Error code: WARNING: /dev/xvda is not a disk image Error parameters: Traceback (most recent call last):, File

Hi everybody! I'm triying to install a Sangoma A200-R FXO card on a Debian Linux 5 (Lenny), 2.6.26 kernel. To install wanpipe driver I type: WANPIPE_FOLDER# ./Setup install Everything seems to be ok. There are no broken dependencies and the hardware is well detected, even zaptel is recompiled with no errors, but at the time to compile wanpipe I'm getting this error message:

Has anyone seen something like this before. Randomly, on longish calls, the local side of the call audio goes dead. Meaning remote caller can hear us but we cannot hear the remote person? Linux voip 2.6.18-128.1.6.el5 #1 SMP Wed Apr 1 09:10:25 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux Asterisk 1.4.24.1, Copyright (C) 1999 - 2008 Digium, Inc. and others. WANPIPE Release: 3.4.1 Wanpipe Config:

Hello List, I have configure 2 sangoma card each with 8 PRI lines with dahdi 2.6 the problem is i can see all channels configured in dahdi_cfg 480 channels configured but when I see /dev/dahdi i can only see 240 channels. what could be problem I am using it wanrouter and when I put PRI in new card i only got calls on new line that means one of the card is inactive at same time all the lines and

Hi Josh, I got a new computer yesterday, a 64bit intel core 2 duo. I am running the amd64 port of Ubuntu 6.10 (edgy). I compiled flac-1.1.3 beta and had trouble encoding: dave@jimmy:/tmp$ ./bin/flac -o /tmp/foo.flac foo.wav ----------------- flac 1.1.3-beta2, Copyright (C) 2000,2001,2002,2003,2004,2005,2006 Josh Coalson flac comes with ABSOLUTELY NO WARRANTY. This is free software, and you

Hi all, My problem boils down to these errors: ... Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion) == Everyone is busy/congested at this time This is triggered by lines in extentions.conf such as: exten => _X.,1,Dial(ZAP/g1/${EXTEN},,W) The system is CentOS v5.2 with Asterisk 1.4.23 (druid-asterisk-1.4.23.1-2), a Sangoma A104