similar to: FAX on PRI to MFCR2

Hi Does Sangoma 8-port card A108 support PCIe version 2.0 ? The card is here http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a108.html And we want to use 3 such cards in this motherboard because it has 3 PCIe slots of version 2.0 http://www.intel.com/products/desktop/motherboards/DX58SO/DX58SO-overview.htm Is this a good idea ? Do you have any experience

Does anybody have a working Asterisk server with Unicall using MFCR2 in Brazil? Were having problems. It seems SPANDSP never detect the tones from the telco. Im using brazil protocol variant. Im having lots of problems to find out why spandsp seems to not detect the MF tones. We send the first digit, the telco says they receive it, and respond with the proper signal to ask for the next digit, we

I am studying about echo cancellation in asterisk and I want to use the numeric information from dahdi_monitor verbose for my research. Unfortunately, I couldn't find anything about the unit of measurement used in this tool. Which unit is used to measure the signal level? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Everyone, We are using two Sangoma U100 (USB FXO) units connected to an Acer Aspire Revo (little PC running on Atom). The units work beautifully except for Monday :-) It maybe a conincedence or maybe the fact that Saturday/Sunday is off and something happens where one of these U100 modules goes into sleep and that's when all the 4 Dahdi channels are lost. So, I have been getting Monday

Dear Steve and *.* e1r2 developers and users, now MFCR2 is successfully installed! many thanks for your help. I'm living in Argelia. I have configure my MFCR2 according argentina R2 settigs. (look at the end of the message) the testcall run perfectly (only warnings and I think that is just debug). but I have many problems and when I run Asterisk-MFCR2, generally in the begging no errors

Hello I'm using mfcr2 support (unicall) in asterisk 1.4. Everything is working fine, asterisk can answer calls. But after some random period of time mfcr2 module stuck. When I make a call to my * box I can hear only signal of getting caller ID ("tritirirti" - like jumping on :) ) and connection is terminated by my telecom operator. When everything I ok after few seconds of this

Trying to install wanpipe 3.5.18. No errors during compile. But when I reach the point where wanpipe and dahdi_cfg is started, I encountered an error. Starting WAN Router... Loading WAN drivers: wanpipe done. Starting up device: wanpipe1 wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid

I'm a long time user of Digium carts and stupid me i wanted to give Sangoma a try. We got Sangoma A400 with 6 FXO ports. Asterisk version: 1.4.35 Zaptel version: 1.4.11 Wanpipe version: 3.5.11 we tried to use fxtune but looks like it wont work with Sangoma card, ( please correct me if i'm wrong) Echo is really bad and also we have background noise on all lines. We tried both mg2 and

Hi, I have installed Elastix 1.5.2 (Barranquilla, Colombia (TELCO: METROTEL)) with a TE220P (2xE1) and TDM2400P (16FXS), openr2 is included in 1.5.2 version. The outcoming calls are ok, but with incoming call i have an error: ERROR*[*14972*]* chan_dahdi.c: Chan 2 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State = Seize ACK Transmitted, MF state = Category Request Transmitted,

Hi List, I'm trying to connect Asterisk with a Nortel Meridian using an E1 with MRFR2 signaling. I've connected both cards, and compiled all the required software... The problem is every call (outgoing or incoming) got dropped, complaining about some "T1 timed out" Only for testing purposes I'm using an application called testcall included on the lib-unicall package, and

Hi, I'm really lost on the directory functionality of the asterisk. I am currently setting a ACD using asteriskathome. I want to use the # feature where in caller can access the companies directory. My issue is how to setup the entry on the directory. Sorry for my silly question Can somebody guide me please. Regards, Leonimar Cape __________________________________________________ Do You

I have a 'CONGESTION' Status with R2 protocol. While testing this scenario sip GW--?Asterisk ?Digium E1 R2 Protocol?Cisco E1 R2 protocol?sip Gw Find below my error and configuration ,where are the errors in my configuration ? ========================================================================= Connected to Asterisk SVN-branch-1.6.2-r235775 currently running on

Hello, We are having issues with a NEW Sangoma A108D: -- Executing [691918892 at pbx1:1] Dial("SIP/xtravoip200-009d24b0", "DAHDI/g0/691918892|30|m") in new stack [Oct 1 10:04:43] WARNING[14171]: channel.c:3170 ast_request: No translator path exists for channel type DAHDI (native 76) to 256 [Oct 1 10:04:43] WARNING[14171]: app_dial.c:1237 dial_exec_full: Unable to create

Hi, I'm running Asterisk 1.4.2 on a Debian GNU/Linux and a Digium TE210P card. I have one E1 with MFCR2 Signaling. I compiled asterisk + libunicall, and I can make calls over E1, but can't receive. Here the CLI when I make a call: -- Executing [006191642208@ps5:1] Dial("SIP/23-081cbc40", "Unicall/g1/91642208|50") in new stack -- Called g1/91642208 [May 14

Is there any way to compile Unicall's libraries (mfcr2, spandsp, chan_unicall, etc) for Asterisk 1.4? BarZ

I have a customer that is complaining that any call coming in from Nextel gives a fast busy. We are running Asterisk 1.4.7.1 with Zaptel 1.4.3 and all the MFC/R2 patches and libraries. All other calls go out and come in, just Nextel seems to have this problem. The phone company technician connected a PBX emulator on the line and that one could receive the calls from Nextel. The E1 is provided

# ./testcall testcall.conf Chan 1, class 'mfcr2', variant 'ar,10,4', end 1, caller 0, from '30025860' to '013331339767' Chan 2, class 'mfcr2', variant 'ar,10,4', end 1, caller 0, from '30025861' to '013331339768' Chan 3, class 'mfcr2', variant 'ar,10,4', end 1, caller 0, from '30025862' to

Perhaps I was a little too hasty in my conclusions of dysfunctional fax on the SPA-2000. It turns out I have a one way audio problem on line one of my SPA-2000. I have all the correct settings according to the comments in the wiki, but the problem persists. However, if I do a hook flash out of and back in to the call that isn't transmitting audio, it works fine. My sip.conf entry for the

Hi all I have MFCR2 successfully installed but seems to get warnings a s seen below when I start asterisk. Am running on Redhat 9. Asterisk Ready. *CLI> Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 far_unblocking_expired Dec 20 08:40:38 WARNING[1175077440]: chan_unicall.c:634 unicall_error: UniCall: mfcr2 local_unblocking_expired Dec 20 08:40:38

Dear Steve and *.* e1r2 developers and users, now MFCR2 is successfully installed! many thanks for your help. I'm living in Argelia (north africa). I have configure my MFCR2 according argentina R2 settigs : the test call run perfectly (only warnings and I think that is just debug). but I have many problems and when I run Asterisk-MFCR2. generally in the begging no errors occur. after