similar to: Polycom 500 / MWI

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

While I know this is not a true asterisk problem, I figure someone where may know. When you click on Messages and it gives you the count of Urgent, New, etc. How can you make the phone gather that information? For example, my phone shows me there is an e-mail. It also sends an e-mail. Yet, when I click on message before I connect to the contact center, it doesn't have any counts. Here is

Hello All, I have some Polycom IP 500 phones that I would like to have configured for direct dialing to our voice mail system. So far I have been unable to get the hard button labeled Voice Mail to connect to Asterisk without first passing through the message center prompts. I have followed all the Admin Guide instructions regarding the phones .cfg files and using

Hi Guys Just a quick question regarding on the 501, has anyone been able to configure the transfer button and messaging buttons to work with asterisk? Can you share a configuration to do this? Thanks in advance. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060301/df504eef/attachment.htm

Hi all - This isn't really directly Asterisk related, but has anyone successfully set up a Polycom phone to register two lines on two different Asterisk boxes? I can get the first line to register, but the second one does not. I can still place calls from that second line, which indicates to me the server, user, and secret are correct. I'm running the newest 2.6 series firmware with the

I think Polycom has added another feature that nobody wants. With MWI configured, and a phonexxx.cfg that has this: <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.subscribe="" msg.mwi.1.callBackMode="contact" msg.mwi.1.callBack="XXX" msg.mwi.2.subscribe=...> </msg> Under 1.3.4 and earlier, the phone would immediately

Greetings, The Polycom SIP 1.5 Admin Guide says this: "3.1.8 Connected Party Identification Where possible, the identity of the remote party to which the user has connected is displayed and logged. The connected party identity is derived from the network signaling. In some cases the remote party will be different from the called party identity due to network call diversion."

Hi, I have lookedaround and don't see this anywhere. Is there a way to tell the ip500 to not make the aural MWI blips?

All - I've been muddling around with this for a few days now.. and I'm trying to figure out why I am not receiving more than one phone call on each polycom 501 phone. I can make more than one phone call out, but not receive another one in, while on a call. Has anybody seen this behaivior before, or is there something simple in the config i'm missing, like.. maxcalls.. or

Hey all, I'll give my reseller a call for support in the morning, but I usually have better/faster luck on the list. I've got a SoundPoint IP500 that I upgraded to BootROM 2.6.2 and SIP image 1.5.2 on someone elses advice, I forgot to change out the old config for the new when I loaded the image up (I guess the config changed a bunch between 1.5.2 and 1.3.1) I was prompted with an error

I used this site (and perhaps a couple other Google returned) as well as the Polycom Admin guide as reference. http://www.voip-info.org/wiki/view/Getting+MWI+on+Polycom+Phones+to+work+wit h+Asterisk 299 is the extension one dials to access their voicemail (with caller ID sending to the correct voicemail). I see the bold on the wiki page telling me to put in my voicemail context, but I'm

Don, All you need to do is configure your VM button on the phone via the cfg files. You setup the phone to look to an FTP server for config scripts and then setup the scripts to work as needed. Here is an example of where you set this VM button from my file called <mac address>-phone.cfg... <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.subscribe="1006"

Hello; I am using vicidial which is using asterisk 1.8, mean while when the extension has voicemail, I always see the red light on the Polycom and hear the beep sound (toot toot) in period time. Also, I can see at the LCD an option to select it for accessing the voicemail ?but I am facing the following problems: 1) The red light and the beep: How I can let the Phone only have the red light

What is required to get the mwi to work? Is it more of a phone subject or *? I have the mailbox= line in sip.conf, but only one extension is named, and in some of the examples, I have seen that there are two... What is that all about and how does it affect the extensions.conf and voicemail.conf? Thanks again..... Just some background as you start seeing my lists, I just started my own business

Hi Dale, yes it's just stack alignment. Unfortunately your patch doesn't make any difference. Thanks for thinking about this, Duncan. On Friday 27 June 2008 19:51:00 Dale Johannesen wrote: > On Jun 27, 2008, at 3:11 AMPDT, Duncan Sands wrote: > > FAIL: test/CodeGen/X86/vec_shuffle-10.ll > > Failed with exit(1) at line 3 > > while running: llvm-as <

On Jun 30, 2008, at 9:25 AMPDT, Duncan Sands wrote: > Hi Dale, yes it's just stack alignment. Unfortunately > your patch doesn't make any difference. > > Thanks for thinking about this, > > Duncan. OK, the test is not quite right then. This doesn't happen on Darwin so I'm afraid you'll have to debug it. Perhaps testing for

Hi Dale, > OK, the test is not quite right then. This doesn't happen on Darwin > so I'm > afraid you'll have to debug it. Perhaps testing for > (RegInfo->needsStackRealignment(Fn) && > FFI->getObjectIndexEnd()!=0) > ? yes, that works - thanks! Since I have no idea what this is doing, is it ok if I leave it to you to commit it?

Hello All, I have Polycom IP 500 phones which I would like to have message waiting indicators on. So far, I have my system running well but the problem I am seeing is that MWI doesn't seem to tell my phone that it should display a MWI state. The light does not show when you have message nor is there any indicator on the text lines of a message waiting. The wiki doesn't cover this

On Jun 27, 2008, at 3:11 AMPDT, Duncan Sands wrote: > FAIL: test/CodeGen/X86/vec_shuffle-10.ll > Failed with exit(1) at line 3 > while running: llvm-as < test/CodeGen/X86/vec_shuffle-10.ll | llc - > march=x86 -mattr=+sse2 | not grep {sub.*esp} > subl $16, %esp > subl $16, %esp > child process exited abnormally Is the code actually loading and storing

Hi, RFC3680 defines a SIP event package for registration. This event package which can be used through NOTIFY-SUBSCRIBE methods, seems very useful for free sitting or presence applications. This package is supported in various SIP phones (at least Thomson ST2030) : when turned on, this feature adds a new login/logout menu among other things. It can also be used to send Welcome notices to mobile