similar to: TDM410 and DSL

Hi recently bought a soekris net5501 and a tdm410 to place in there. I am having some issues attaching 12V power to the card via the molex card - basically the box for the motherboard is too small. I have read up about a PWR2400b and it seems to use 2wire pin, I am guessing to connect to P8 just behind the molex connector on the tdm410. can any one here confirm this, or have any info on the

Hi list, I'm having a problem with CallerID names not showing up when calls come in. I have dialplan code to store the callerid(name) away and it is blank (null). However, the voicemail variable ${VM_CALLERID} has the name field populated. For example, here is some of the dialplan code: 2. Set(CALLER_ID_INFO_ALL=${CALLERID(all)}) 3. Set(CALLER_ID_INFO_NAME=${CALLERID(name)}) 4.

Hi I am having some problem forcing my tdm410 to alaw over ulaw, I have 1.6.1.0 asterisk (debian i486) dahdi 1:2.2.0 built with the hardware echo canceller firmware /etc/asterisk/chan_dahdi.conf alaw=1-4 but I have this in the general section, before any channel definition dahdi show channel 1 Default law: ulaw even when i have a call going it is still ulaw Thanks Alex

Hello, my name is Paul. I need to map a PCI device for a virtual machine. The Linux distribution is Ubuntu server 9.10, infrastructure virtualization is "KVM". The virtual machine will install trixbox. To map the PCI card is a "Digium TDM410p. There currently, KVM hosts a virtual machine that runs smoothly without any problems. In fact, this virtual machine is running

Hello, I am currently trying to configure an Asterisk (current 1.4) box with a TDM410P and 2 FXS as well as 2FXO modules. An analog modem is directly connected to the TDM (port 4) which itself is directly connected to the PSTN (port 1). [V.34 Modem]-----[TDM on Ast. 1.4 TDM]---PSTN When I try to establish an analog modem connection with this setup, the modem is unable to connect to the remote

Hello, I am now working on a project which need data modem calls passing trough asterisk with a TDM card. But i found out (as Mr Greg woods) that it was impossible. So know i am trying doing this using an E1/T1 card (TE110P). I am still working on it so we can help each other to find a solution to this.

Hi I am in the middle of move a small business over from legacy PABX + PSTN lines to VOIP infrastructure. I borrowed a spa9000 to place between the PABX and the PSTN lines. I have had this going for a while (>5 months) and it has been working fine (some issues with echo and other minor things), which is why I am moving to asterisk. I bought a tdm410 with 3 fxo + fxs. The fxs is connected to

On 9 Jul 2014 at 6:01, Gene Cumm wrote: Date sent: Wed, 9 Jul 2014 06:01:22 -0400 Subject: Re: [syslinux] isohybrid binary not in 6.03-pre18? (utils bt is in bios/utils?) From: Gene Cumm <gene.cumm at gmail.com> To: "Michael D. Setzer, II" <mikes at kuentos.guam.net> Copies to: Syslinux at zytor.com > > On Jul 9, 2014 5:15 AM, "Michael D. Setzer II" >

Hello, I have a current asterisk 1.8.13.0 asterisk-addons 1.6.24 asterisk-sounds 1.2.1 dahdi-linux-complete 2.6.1+2.6.1 libpri 1.4.12 and asterisk-gui 2.1.0.rc1 (not trying to use the gui, want to do everything by hand) with a TDM410 with 2FXO and 2FXS. I have my POTS (PTNS) line plugged into port 1 (FXO) and a analog phone connected to port 3 (FXS). I compiled asterisk with asterisk

Just a quick update. The cat.c in the com32/modules directory works fine. Just added a printf("\nPress Enter to Return to Menu\n"); at the end since I had some uses display the messages, and then not release all they had to do was press enter to rerun the menu. The display.c32 still does work, but know it doesn't lock the system so only a hard reset works. Ctrl-Alt-Del works. I

Can you detail at what time does HDT locks ? The HDT iso does provides a verbose mode, It would be interesting to get when it locks. 2014-02-13 14:43 GMT+01:00 Michael D. Setzer II <mikes at kuentos.guam.net>: > I've got a user of my g4l project that is having a system that locks with > my > kernels, but also with hdt? The default versions are using the 5.10 > version of

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Was just working with the latest 3.54, and find that the Makefile in the menu directory didn't work until I added the /include/syslinux to the file. < CFLAGS = $(M32) -mregparm=3 -DREGPARM=3 -W -Wall - march=i386 -Os -fomit-frame-pointer -I$(LUDIR)/include - I$(COM32DIR)/include -I$(COM32DIR)/include/syslinux -Ilibmenu - D__COM32__ -

I have a project g4l that uses syslinux and have been working on the next version. I installed the 3.74 pre5, and it worked just fine. But I was doing a test, and booted the systems, and usually pick the default kerenel or one of the other kernels on the CD before it times out with 60 seconds. But this time, I didn't do that. It loaded the default kernel with no problem, but then gives

Update. I renewed the dns for $16.67? Did the same last year, but it actually showed it was expired last year? This year it just stopped working and dig was showing it not expiring till next year? So, it seems to be back up. Don't have any control on site, but anyone with an account can renew it. Dear Customer, We are pleased to confirm that you have successfully renewed the following

When Kernel.org finally came back up, the boot directory and syslinux were there, and it was the same files as before from what I could tell, but now the boot directory is no longer there? Wondering why it was there, and now gone? +----------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor Guam Community College Computer Center

I have dyndns.org account, so added the name below and mapped the IP address to it for now. Rather than having to remember the number. http://hdt-project.dyndns.org/ Not sure what the status is. On 5 May 2016 at 7:02, Pierre-Alexandre Meyer wrote: Date sent: Thu, 5 May 2016 07:02:51 -0400 Subject: Re: [syslinux] HDT site down?? From: Pierre-Alexandre Meyer <pierre at mouraf.org> To:

I've got a user of my g4l project that is having a system that locks with my kernels, but also with hdt? The default versions are using the 5.10 version of syslinux, but build a special setup using 6.02 and it still locks with both the kernels and the hdt? He was able to get gparted i486 live iso to boot on the machine, so not clear what the issue might be. The system is a Fujitsu T734

I just downloaded the pre48 and ran make. It ran fine for everything, but ended with a number of errors related to the syslxcom program. Usually, I only see the messages about the windows build since I am doing the make on a Fedora 10 system. Is there something new that has been added that requires something that I am missing? From looking at the program this isn't related to the isolinux

It now been a few days, and wondering if someone might know the status? The following error was encountered while trying to retrieve the URL: http://www.hdt-project.org/wiki/hdt-0.5.0 Connection to 204.232.192.182 failed. The system returned: (110) Connection timed out Hasn't been updated in some time, but I regularly check the site.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a boot cd with multiple kernels to support various hardware, and was recently adding the latest 2.6.19 git kernels. When I started with the git kernels, it would boot, but could not mount the / root file system since the block size was only 1024, and needed 4096. I found that changing the mke2fs command with the -b 4096 option made this