similar to: problems inserting dahdi modules using Debian Leni

Hi, I have some servers that are dedicated to do meetme conferencing. From some previous test i concluded that I need to use dahdi_dummy as it is more accurate. If I did use the core timers in dahdi (not loading dahdi_dummy) I got bad quality in the conferences and dahdi_test showed 99.6% as worst. I thought maybe the issue as bad hardware for the timing or something else. But today I

I am installing dahdi on a machine lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Hewlett-Packard Company Unknown device 9602 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD]

Hi to all. I'm trying to use meetme on asterisk 1.4.22.1. On a debian i've compiled (as i need h323 support) openh323_v1_18_0 pwlib_v1_10_0 dahdi-linux-2.1.0.3 dahdi-tools-2.1.0.2 asterisk-1.4.22.1 All works fine, dahdi status is: asterik:/data/programmi# /etc/init.d/dahdi status ### Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: RTC) 1" (MASTER) asterik:/data/programmi#

I updated Asterisk to 1.6.2.7 and now the user introduction in the meetme application is no longer working: [May 27 09:26:51] WARNING[2407]: channel.c:4034 ast_request: No channel type registered for 'DAHDI' -- Created MeetMe conference 1023 for conference '800' [May 27 09:26:51] WARNING[2407]: app_meetme.c:3640 find_conf: No DAHDI channel available for conference, user

I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and installed dahdi-2.2.1. kernel modules loaded. lsmod | grep wctdm wctdm 37233 0 dahdi 194985 1 wctdm lsmod | grep dahdi dahdi 194985 1 wctdm crc_ccitt 1549 2 dahdi,isdnhdlc dmesg: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.2.1

Hello all. Since half december we are trying to implement * as our primary PBX. We had a test machine running with 2 sip phones and a single ISDN card. Since this was working ok, we installed * on our main Debian server. Some specs: P4 2.8 Ghz HyperThreading 512 MB RAM Debian Sid updated every week. Linux 2.6.9 vanilla kernel (not the debian package) 1 Intel Pro 100 nic for internal network 2

Hi, I need to run ztdummy for Paging, but now that this is all become dahdi I don`t really know where to start. I did build dahdi before building asterisk, but that`s it. I find it hard to find any documentation referring to dadhi instead of zaptel. I have no Digium hardware, but I still need the ztdummy timer (or whatever it`s called now). How do I get myself going? Regards,

Hi, I am running Fedora 7 VM. On an earlier configuration with zaptel and Asterisk 1.4.21 , meetme worked alright. I upgraded to Dahdi and Asterisk 1.4.26, and the result is choppy sound via Meeme, while a simple Musiconhold works OK with descent audio quality. So I am sure its a Dahdi_dummy problem. Running dahdi_test gave me very poor results. Opened pseudo dahdi interface, measuring

Hello there: I think I have a silly kernel configuration problem. I'm running: * vanilla 2.6.27.10 kernel built from source * dahdi-2.1.0.4 built from source So far so good, dahdi module loads just fine: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.1.0.4 when I try to: hal04 dahdi # modprobe dahdi_dummy FATAL: Error inserting dahdi_dummy

Hi I am in the process of installing a new box and using dahdi. I have a tdm410 + hardware echo canceller. I have just read in the read me for dadhi that VPMADT032 support has been removed and unlike with the zaptel stuff i could just download and install the firmware I can't with dahdi what is the best way forward to recompile with hardware echo canceller support. Thanks Alex

Howdy, I am playing around with asterisk within an LXC container on Ubuntu 11.04. I have asterisk (1.4.42) running fine, but want access to dahdi_dummy for timing (meetme). I have dahdi installed on the "host", and dahdi_dummy is loaded: root at astnorth:/# ls -ltr /dev/dahdi total 0 crw-rw---- 1 root root 196, 250 2011-06-08 13:59 transcode crw-rw---- 1 root root 196, 253

Hi. I have an asterisk system under Debian Leni using asterisk 1.8 with no Digium hardware -- and when I go into a meetme conference the system either locks up or is 100% cpu utilized or something -- I can't type anything and I have to physically reboot the system. The dahdi module is loaded and the last log entry is the playing of you are the only person in this conference,. How would I

Hi guys, I'm currently playing around with optimizing an Asterisk install (trying to remove as many possible configuration files as possible) for testing and debugging purposes. I've been able to remove most of the files and maintain an error-less Asterisk full file, with a single exception: I can't seem to remove `chan_dahdi.conf` without having Asterisk complain in the full logs:

Hi list, I had a problem with the dahdi XPP driver. After this error in syslog, the Xorcom disconnect from the server: Jun 3 15:03:29 kernel: [361010.637858] *NOTICE-xpp_usb: xusb-0 (usb-0000:00:1d.7-3) [X1047686]: Sluggish USB. Dropping next PCM frame (p** **ending_writes=5)* Jun 3 15:03:52 kernel: [361033.890575]* ERR-xpp: XBUS-00: Failed to send from command_queue (ret=-19)* Jun 3

Hello I was editing files manually, and noticed that if I include the familiar "fxsks=1" in /etc/dahdi/system.conf, Dahdi fails loading: ===================== # cat /etc/dahdi/system.conf loadzone = fr defaultzone = fr fxsks=1 ===================== # /etc/init.d/dahdi start Loading DAHDI hardware modules: wctdm: [ OK ] /usr/share/dahdi/waitfor_xpds: Missing

Tengo en una maquia ubuntu 8.10 el kernel es Linux 2.6.27-14-generic Quiero configurar una tarjeta x100p i usarla con asterisk, asi que descague compile e instale lo siguiente: asterisk-1.4.24 dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.9 Sin embargo no logro configurar la tarjeta con exito, ya probe casi? todo. Esto aparece si ejecuto lspci: 04:06.0 Communication controller: Motorola

I am having problems getting a Nicherons TDM400P wildcard clone to dial out. Everything appears to be configured correctly, but although I see call progress, it never seems to actually pick up the phone. (The following is a test of 911 emergency, where I substitute 811 [repair service] as the actual number dialed.) *CLI> -- Executing [911 at from-internal:1]

I'm playing around with an ALIX 2D2 board (http://www.pcengines.ch/alix2d2.htm). It's a fanless, x86 system using an AMD Geode processor with 256MB of RAM. Also available are two network interfaces, two USB ports and one serial port (no keyboard or VGA). I'm using the Voyage Linux distro, which basically is Debian Lenny optimized for this board. Asterisk 1.6.1.12 runs fine on the

Hello all, Ok it is Sunday afternoon and I am going crazy. I have been running in circles so long that I can't think straight. As an example, I sent this message to the wrong address the first try, AAARRRRGGGGGGHHHHH. I have Asterisk 1.6.0.6 and DAHDI Tools Version - 2.1.0.2, DAHDI Version: 2.1.0.4, OpenSuSE 10.3 x86_64, tdm422 at the end of installing dahdi-linux and dahdi-tools I get:

1. Is it normal to see : # lsmod Module Size Used by dahdi_dummy 3236 0 Shouldn't it be used by asterisk or is this 0 value meaning something specific ? 2. How can you check dahdi is running ? Here, "ps aux | grep dahdi " replies "grep dahdi". Cheers ------=_Part_2692_19661943.1228286635399 Content-Type: text/html; charset=ISO-8859-1