similar to: DAHDI on VMWARE

Quick and dirty question: for the TDM410P I must use the wctdm24xxp driver? Att Vin?cius Fontes Desenvolvimento Canall Tecnologia em Comunica??es Ltda.

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

Hello again list, I'm running a 1.4.42 install on SUSE with an AEX410P card. The DAHDI release is 2.4.0 because the machine won't properly install 2.5 and also won't install Asterisk 10.0 because I can't get a good SQLite3 library to install. Whenever I enter DTMF very quickly or very slowly, app_read des on me. Has anyone experienced similar joy

A previous issue has popped up and once again I'm out of ideas. During the evenings it seems that the TDM channels will spike (dahdi_monitor) and will refuse to listen for audio of any type, this includes DTMF. The only resolution I know of is to stop Asterisk and restart the dahdi service, but that's not a solution. All channels look like this, even the FXS. [root at asterisk Hardware]#

Actually I can start and receive SIP calls (PC client, iphone client) but?I have an issue with calling external number throught PSTN (certified-asterisk-1.8.11-cert2). I'm having this ?error when making a call: *CLI> ? == Using SIP RTP CoS mark 5 ? ? -- Executing [9000 at local:1] Dial("SIP/3000-00000006", "DAHDI/1/4384019357,10") in new stack [Jun 23 16:18:09]

Hello my friends... We are having some problems with the fax in our asterisk server... We have: Asterisk 1.4.21.2 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P This digium card has 3 FXO ports and 1 FXS port where we have a fax machine connected! The problem is that we can receive fax very good, but we can't make any outbound fax call, in fact, our asterisk get freezed

Hi, On a Lenny system, with dahdi 2.4.0, libpri 1.4.11.5 and asterisk 1.6.1.18, I inserted a new Digium HA8 + B400M card. My usual installation fails. I can see it listed : # lspci -n | grep d161 01:0b.0 0200: d161:8007 (rev 11) # lspci -vn 01:0b.0 0200: d161:8007 (rev 11) Subsystem: d161:8007 Flags: medium devsel, IRQ 22 I/O ports at d400 [size=256] Memory at

Hi, Before I report a bug on http://bugs.digium.com, I would like to know if someone is seeing the same error message. Personally I am not using wctdm24xxp but other modules such as wcte12xp and wctdm. The latter modules load fine and are compiled with pci_register_driver as expected. The only module that seems to require the deprecated function pci_module_init is wctdm24xxp. Is this normal?

Hi list, I installed 2 HB8 cards each of them with a Quad Bri modules in a HP 360 G6 running Debian Squeeze. Here is an output of dmesg wafter server has booted: [ 9.784123] wctdm24xxp 0000:0b:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 [ 11.847073] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex [ 11.847600] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [

Issuing the AMI Status command results in a list of active channels. But how to figure out which channels are related before the call is answered? 2 channels below are somehow associated, but how can I be 100% sure they are related in order to implement a redirect of the incoming call to another phone ("attended" call pickup respecting call/pickupgroups). Uniqueid seems to be a

Hello, I have just installed an Asterisk server with a Digium TDM410P card with 3 FXO modules (no module in the 4th slot). It's lived on two different machines (a test machine, which had Linux kernel 2.6.28, and a new dedicated machine which has Linux kernel 2.6.32). On the test machine (2.6.28), I used the Zaptel drivers. Once the kernel modules were loaded, the lights on the TDM410P came

Something new to me. Recently installed a 1.4.30 box for a small office with four POTS lines in a hunt (Digium TDM410P). Had the telco put a "call forward" option on the main line of the hunt. They dial a feature code from their desk phones (Polycom IP450) that results in forwarding the main number to our VoIP service. This is all to let them "try out" our dialtone

hi, i just installed 2 new tdm410p's on asterisk 1.4.19 with zaptel 1.4.10. They have the hardware echo cancellers. I am having an issue though, when i talk, it cuts out the other end. So for example, i called up another asterisk box and was listening to the prompts and as they were playing if i said something, it would cut out the other end. so i basically started counting and for the

I have been doing a lot of reading forums and elsewhere but am somehow unable to connect the dots. Here is what I am trying to accomplish initially and then wish for it to grow bigger from here on. I have two POTS (Analog) line that would connect to the Asterisk Box. I have, to begin with 5 IP phones (PoE), all connected to a switch. Asterisk Box with a LAN card also connects to the same switch.

I'm trying to configure a TDM808P card on debian. When I modprobe wctdm24xxp i get this error FATAL: Module wctdm24xxp not found. FATAL: Error running install command for wctdm24xxp I think i have successfully compiled the zaptel drivers, and the card appears when i do a lspci 02:06.0 Ethernet controller: Digium, Inc. Unknown device 0800 (rev 11) Subsystem: Digium, Inc. Unknown

The relevant part of my setup is something like: SIP phones -> local server -> remote server -> SIP-to-PSTN provider I want _some_ of the SIP phones on the local server to be able to get access to SIP-to-PSTN, but not all of them. The local-to-remote connection is IAX2 over VPN. Do I need to set up two separate IAX2 connections, one "privileged" and the other not, or can I

Hi! Is possible to use X100p TDM400P, Tdm410p, Tdm400, A400p, Ax400p or any others digium card FXO for use Fax modem? Thanks.

Hi. Please help. When trying to compile Zaptel 1.4.5.1 I get the following: /build/include/linux/modversions.h -DSTANDALONE_ZAPATA -I.. -o base.o -c base.c base.c:48:29: linux/workqueue.h: No such file or directory base.c:292: warning: `vpm150m_firmware' defined but not used make[2]: *** [base.o] Error 1 make[2]: Leaving directory `/usr/src/zaptel-1.4.5.1/wctdm24xxp' make[1]: ***

Hi, I'm facing an issue with which loading wctdm24xxp module fails. Here is relevant dmesg's output : [ 13.455729] dahdi: Telephony Interface Registered on major 196 [ 13.455729] dahdi: Version: 2.4.0 [ 13.510847] ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 15.527788] wctdm24xxp 0000:01:0b.0: Timeout waiting for receive frame. [ 17.527787]

When I compile dahdi I see these warnings: WARNING: "kasprintf" [dahdi-linux-2.5.0.2/drivers/dahdi/wctdm24xxp/wctdm24xxp.ko] undefined! WARNING: "kasprintf" [dahdi-linux-2.5.0.2/drivers/dahdi/dahdi.ko] undefined! And "modinfo dahdi" shows that the driver was built for a 2.6.17 kernel, SMP mod_unload 586 4KSTACKS gcc-4.1 If I "modprobe -a dahdi", I get