similar to: dahdi vmware query

Hi gang, We are moving our computers from a cluster of physical machines to a VMWARE server with virtual machines. We investigated and are looking to replace our TDM400P/TDM410P with AEX410P cards. Can we run asterisk with the DAHDI drivers from one of the Virtual machines or is DAHDI going to have to be a native process on the "REAL" machine? Thanks Danny Nicholas

Hi Listers, I'm running 1.4.25-rc1 on opensuse 11.0 with dahdi-linux-2.1.0.3, dahdi-tools-2.1.0.2, libpri-1.4.7 and snapdsp.0.0.2. Incoming calls work fine. Outgoing calls made directly (exten => s,1,Dial(DAHDI/G1) then number work fine. The problem I have is trying to let Asterisk make the call (exten => s,1,Dial(DAHDI/G1/5551212,,r). If I use "m" (moh) the

Greetings, This may be a dumb question, but here goes. When I was on 1.4.21.2 using Zaptel, I had (at least as far as I could tell) access to line supervision on my POTS lines using a TDM400P/TDM410P. Since upgrading to the DAHDI branches of 1.4 (SVN and 1.4.26.1), I've only been able to duplicate the success of the 1.4.21 functionality once. To test what I'm talking

Hello, I have just installed an Asterisk server with a Digium TDM410P card with 3 FXO modules (no module in the 4th slot). It's lived on two different machines (a test machine, which had Linux kernel 2.6.28, and a new dedicated machine which has Linux kernel 2.6.32). On the test machine (2.6.28), I used the Zaptel drivers. Once the kernel modules were loaded, the lights on the TDM410P came

Hello Asterisk users, We are having MANY but MANY problems configuring an analog fax machine to work properly on Asterisk, the first thing we do was to plug in the Fax analog machine to the FXS port of the Digium TDM410P, we set echocancel=no on zapata.conf and also faxdetect=yes on general section, but our Asterisk CRASH every time we try to send/receive fax! We are using Asterisk 1.4.21 and

Hi, Trying to configure my tdm410p card, my dahdi in asterisk cli was missing. ! ael agent agi cdr channel cli config console core database devstate dialplan dnsmgr dundi features file group hangup help http iax2 indication keys

Good day , I have configured TDM410P (asterisk 1.6.x) on Cent OS 5, but dahdi take some time to hangup the call when playing the IVR..(it will send the hangup signal after finishing the IVR promt..) is there any specific setting to avoid such incidents ? iam using busycount as 3, signalling=fxs_ks ;toneduration=100 callwaiting=yes threewaycalling=yes callreturn=yes

The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that option was for the old phones that have a neon light (or equivalent LED+ZENER ciruit). Are other phones off the TDM410P (other than the VTECH) working, or is the Vtech the only model with VMWI available to you. I'm not able to check at the moment, I have copied the asterisk-users list, someone else may

Hello list, This may or may not be Asterisk related, but if I had hair I'd pull it out over this. I have a TDM400P card in a Dell POWEREDGE 1550 running Asterisk 1.4.30. Everything works great except that every time it rains, I get flooded with this CLI message - == Starting post polarity CID detection on channel 1 -- Starting simple switch on 'DAHDI/1-1'

I've got a Digium Wildcard TDM410P with one POTS line and three extensions. One of the extensions is connected to a fax modem. This kind of works, but there's a gotcha. If I set faxdetect=incoming in chan_dahdi.conf, then incoming faxes do get routed to the modem and this all works, but outbound faxes fail, with a message like this: [Oct 29 21:57:09] WARNING[16732][C-00000000] app_dial.c:

Actually I can start and receive SIP calls (PC client, iphone client) but?I have an issue with calling external number throught PSTN (certified-asterisk-1.8.11-cert2). I'm having this ?error when making a call: *CLI> ? == Using SIP RTP CoS mark 5 ? ? -- Executing [9000 at local:1] Dial("SIP/3000-00000006", "DAHDI/1/4384019357,10") in new stack [Jun 23 16:18:09]

Hello my friends... We are having some problems with the fax in our asterisk server... We have: Asterisk 1.4.21.2 Zaptel Version: 1.4.11 libpri version: 1.4.5 Digium Card TDM 410P This digium card has 3 FXO ports and 1 FXS port where we have a fax machine connected! The problem is that we can receive fax very good, but we can't make any outbound fax call, in fact, our asterisk get freezed

Hi I was reading this article on installing asterisk 1.6 + debian http://www.howtoforge.com/installing-and-configuring-asterisk-1.6-and-postgresql-to-manage-cdr-and-realtime-config-on-debian and I noticed they suggested to recompile to 1000Hz enable kernel, I currently have a 250Hz stock standard kernel. I am running on a soekris board - amd geode cpu. Is recompiling the kernel to the

Something new to me. Recently installed a 1.4.30 box for a small office with four POTS lines in a hunt (Digium TDM410P). Had the telco put a "call forward" option on the main line of the hunt. They dial a feature code from their desk phones (Polycom IP450) that results in forwarding the main number to our VoIP service. This is all to let them "try out" our dialtone

Hello, I am working on a trixbox based system with a TDM410P connected to 3 phone lines from the CO. The asterisk box is on a full duplex 100Mb LAN with some polycom and Aastra SIP phones. In general everything works. the problem I am trying to solve is that if both parties to a call speak at the same time one of the voices gets cut out such that the talker A cannot hear what talker B is

I have been doing a lot of reading forums and elsewhere but am somehow unable to connect the dots. Here is what I am trying to accomplish initially and then wish for it to grow bigger from here on. I have two POTS (Analog) line that would connect to the Asterisk Box. I have, to begin with 5 IP phones (PoE), all connected to a switch. Asterisk Box with a LAN card also connects to the same switch.

Hi, I know it sounds weird, and this is part of the reason I have not reported that sooner. As I upgraded from 1.6.2.x to 1.8.x several months ago I am experiencing this problem. If a call is initiated from a DAHDI extension after no DAHDI extensions were used for some time, arbitrary DTMF digits are skipped and the call fails. If the call is redialed it goes through. Normally just one (1)

On a BT line, how do I determine whether the number on an incoming call has been deliberately withheld (by dialling 141) or is merely unavailable (e.g. because it originated from overseas or passed through some ancient switching equipment) ? In the first case, I want the caller to be played a message to the effect that we are not at home to anonymous cowards but if their business is

Hello asterisk users... We are having a little problem in our installation, we are using Asterisk 1.4.21.2 and zaptel 1.4.11 with a Digium TDM410P (3FXO + 1FXS), the problem is that when we disconnect the line from any of the fxo ports, we receive an incoming ghost call (using zap/x channel) it rings on the phone but we cant hear nothing...it's always doing the same everytime we disconnect

Yesterday I pulled in the latest svn of Dahdi and added the files from a recent kernel in the drivers/staging/echo structure and modified the Kbuild file so it would compile without error. I insmod'ed the module in, and modified my system.conf has echocanceller=oslec. cat /proc/dahdi/1 shows: Span 1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER) IRQ misses: 1 1