Hi Listers,
I'm running 1.4.25-rc1 on opensuse 11.0 with
dahdi-linux-2.1.0.3, dahdi-tools-2.1.0.2, libpri-1.4.7 and snapdsp.0.0.2.
Incoming calls work fine. Outgoing calls made directly (exten =>
s,1,Dial(DAHDI/G1) then number work fine. The problem I have is trying to
let Asterisk make the call (exten => s,1,Dial(DAHDI/G1/5551212,,r). If I
use "m" (moh) the music plays 5-8 seconds after the other end picks
up.
When using "r", I get 2-3 rings after other end picks up. I've
went through
every flavor of dahdi-linux from 2.0.0 to 2.1.0-rc4 (which crashed me) with
no joy. Any suggestions? Hardware is Dell Poweredge 1650/1550 and
TDM410P/TDM400P.
Thanks in Advance
Danny Nicholas
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20090520/b63b46df/attachment.htm
Danny Nicholas wrote:> Hi Listers, > > I'm running 1.4.25-rc1 on opensuse 11.0 with > dahdi-linux-2.1.0.3, dahdi-tools-2.1.0.2, libpri-1.4.7 and snapdsp.0.0.2. > Incoming calls work fine. Outgoing calls made directly (exten => > s,1,Dial(DAHDI/G1) then number work fine. The problem I have is trying to > let Asterisk make the call (exten => s,1,Dial(DAHDI/G1/5551212,,r). If I > use "m" (moh) the music plays 5-8 seconds after the other end picks up. > When using "r", I get 2-3 rings after other end picks up. I've went through > every flavor of dahdi-linux from 2.0.0 to 2.1.0-rc4 (which crashed me) with > no joy. Any suggestions? Hardware is Dell Poweredge 1650/1550 and > TDM410P/TDM400P.Any reason you're using the r/m option at all? Since this is an analog card I would leave the r/m off and just let asterisk use the in-band progress from the telco. -Dave