Displaying 20 results from an estimated 4000 matches similar to: "PRI D-channel bouncing"
2009 Feb 25
4
TE121 on Asterisk
Hello, I just bought a TE121 T1/E1 card, and now trying to install it on a
1.4.23.1 asterisk with dahdi 2.1.0.4
Actually first everything went on well and i managed to see my card on dahdi.
Here's the output:
#asterisk# dahdi_hardware
pci:0000:04:08.0 wcte12xp+ d161:8000 Wildcard TE121
and this is the scan:
--------------------------
asterisk# dahdi_scan
[1]
active=yes
alarms=RED
2009 Aug 25
2
Echo
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
I recently upgraded my Asterisk system to Dahdi and now I have an echo
<br>
problem.
<br>
<br>
I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium
<br>
TE121B PCI express
2010 Nov 27
1
DAHDI 2.4.0 produces HDLC errors with echo canceler
Hi,
After upgrading to DAHDI 2.4.0 from Zaptel, I noticed a lot of HDLC
errors on my console:
[Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Bad
FCS (8) on Primary D-channel of span 1
[Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Abort
(6) on Primary D-channel of span 1
These errors prevented calls from being made and received on my PRI spans.
This seems
2014 Jul 14
2
Issue with new Te133
Have a new TE133 in a dell R320.
dahdi_cfg -vvv shows:
DAHDI Tools Version - 2.9.1
DAHDI Version: 2.9.1
Echo Canceller(s):
Configuration
======================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01)
Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02)
Channel 03: Clear
2013 Nov 14
1
e1 , hdlc data link?
Hello!
I want to use TE121 for E1 data link to cisco.
Really only for tests now.
So I wrote:
span = 1,1,0,ccs,hdb3,crc4
#span=1,1,0,esf,b8zs
nethdlc=1-31:hdlc0
may be first line is wrong, problem is somewhere else anyway.
Just because I get:
# dahdi_cfg
DAHDI_CHANCONFIG failed on channel 1: Function not implemented (38)
This is centos 6.4 box with dahdi 2.7.0.1.
Could you tell me is it
2020 Sep 06
0
dahdi_cfg -vvv error , PRI show spans command not found
dahdi_cfg -vvv error `cut: '/sys/bus/dahdi_devices/devices/pci:0000:01:00.0/spantype': No such file or directory`
PRI show spans --command not found
test call not working.
-- dahdi_genconf -vvv
Default parameters from /etc/dahdi/genconf_parameters
Generating /etc/dahdi/assigned-spans.conf
cut: '/sys/bus/dahdi_devices/devices/pci:0000:01:00.0/spantype': No such file or
2010 May 27
2
BRI card(B800P) doesn's work with DAHDI(wcb4xxp) in NT mode
Dear Supports,
I was attempting to install BRI Card(OpenVox B800P) with wcb4xxp in NT mode .But I can not make it worked!
Could you please give me some hints? Thanks in advance!
Here are my environments:
------------------------------
CentOS-5.3
Kernel-2.6.18-164.el5
asterisk-1.6.1.6
dahdi-linux-complete-2.3.0+2.3.0
libpri-1.4.10.2
OpenVox-B800P(the first port is spliting into
2010 Jan 18
0
TDM2400P "Unable to set SW Companding on channel .."
Hi:
I?Bought TDM2400P ,with 24 FXO ports , I installed? the asterisk 1.4.28 and?dahdi 2.2.0?and then i compiled them and configured all, i pluged into 8 pstn line into the Rj connector and then i got messages on asterisk console that alarm cleared on channels 1->8??, at this step everything should go fine ,but when i try to make a call?through the TDM?there is silence and no audio,and then i
2010 Jan 14
2
Dahdi issues
Hello,
My first attempt to get dahdi running on 1.4.28... with a Rhino 8 port
modular card and a single FXS module.
Got the Rhino card installed and the machine sees it:
root at pbx:/etc/dahdi# dmesg | grep rcbfx
[ 71.985309] rcbfx 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ
21
[ 71.985440] rcbfx 1: Rhino PCI BAR0 50100000 IOMem mapped at
ffffc90008d7c000
[ 71.985504]
2013 Nov 23
1
DAHDI Missing '/sys/bus/astribanks/drivers/xppdrv/sync'
Hello group,
I am installing Asterisk on a new pc running Ubuntu 12.04.3 Server. ?I have dahdi-complete-2.7.0.1+2.7.0.1, and have tried 2.6.1 and 2.8.0-rc1 and 2.8.0-rc2. ?I am following along in the ASTERISK The Definitive Guide 4th Edition and on page 116 when I issue the command $ sudo /etc/init.d/dahdi start I get the following error:
Loading DAHDI hardware modules:
? ?wctdm24xxp: done
2014 Jun 01
1
wct4xxp Excessive Interrupts Resulting in Unusable System or Card
Hello all-
I have a Digium TE410P in an HP DL145 G2 dual processor server that generates well over 100,000 interrupts per second (sometimes I?ve counted 160,000+ per second) generally resulting in either the system becoming swamped and unusable or the kernel disabling the IRQ the TE410P is on resulting in the spans on that card being unusable.
I have confirmed that the card is good by placing it
2012 Feb 03
2
Junghanns QuadBri install help
Hi,
I have a Junghanns QuadBri installed and seems to be detected and working
correctly using the wcb4xxp driver
All ports are configured as TE
The problem is when I connect an ISDN line - the LED turns green and Dahdi
status shows Alarm OK
But when I try to make a call I get "All circuits are busy" cause 27
I have searched and web and tried numerous configs but it doesn't want to
2006 Apr 30
2
PRI Issue: D-Channel woes
Hi,
I am about to pull my hair out after trying to get our PRI up and working.
We are switching from a Cisco gateway to an Asterisk box which provides
the 23 phone lines for our office. So, because the Cisco gateway is
working I can assume I have all the settings right (b8zs, esf, dms100,
etc) and the PRI is live (because we are switching over). When dialing
from PSTN, I get busy signal. When
2020 Oct 22
1
Digium TE134 compatibility issues with new Dell server - Zero interrupts
I am getting zero interrupts for a new Digium TE134 Card on a new brand new
Dell T40 server with the latest BIOS. Is there something that I am missing
or is the card not compatible with Dell servers?
(cat /proc/interrupts ; sleep 1 ; cat /proc/interrupts) | grep -i wcte13xp0
16: 0 0 0 0 IR-IO-APIC 16-fasteoi
i801_smbus, wcte13xp0
16: 0
2009 Sep 01
2
chan_dahdi.so fails to load : Inappropriate ioctl for device
Aloha,
I'm not sure why I'm getting this error, but I can't seem to get
chan_dahdi to load. SIP & IAX2 are working fine.
Debian 4 w/ 2.6.28 kernel. Asterisk 1.6.1.5, dahdi-linux 2.2.0.2,
dahdi-tools-2.2.0
CLI> module load chan_dahdi.so
Unable to load module chan_dahdi.so
Command 'module load chan_dahdi.so' failed.
[Sep 1 10:57:51] WARNING[31696]: pbx.c:4550
2004 Jul 02
0
Channel Bank Newbie Problem
Hi all
I'm trying to configure a TE410P in Europe with three
E1s and a T1 channel bank (already bought in the US) to receive and make
calls through *. I managed to get the E1s to work, but I'm having
trouble with the channel bank (a Rhino). I have tried the bank in spans
1 and 4 changing jumpers in the card (always with no PRI connected, as I
have no PRI where I'm testing now,
2012 Dec 21
2
dahdi timing source multiple cards
I have a box with 12 T1s (4 Te410P cards). The PSTN provider is reporting
slips and ask me to update the clock source. I have my system.conf set as
the following but when I run dahdi_scan only the ports on Card 1 are showing
up with syncsrc=1
system.conf :
span=1,1,0,esf,b8zs
bchan=2-24
mtp2=1
span=2,2,0,esf,b8zs
bchan=26-48
mtp2=25
span=3,3,0,esf,b8zs
bchan=49-72
2010 Sep 01
2
Freepbx + Asterisk problem - NEED HELP
Hello,
After installing on Ubuntu 10.04 using the tutorial on
http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html
I have a running instance of Asterisk.
PROBLEM: result of dahdi_cfg:
DAHDI Tools Version - 2.2.1
DAHDI Version: 2.2.1
Echo Canceller(s): MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2)
2005 Sep 07
1
ztcfg Kills My Dial Tone
I'm using two Rhino channel banks (first 12FXO/12FXS, second 24FXS).
These connect to a Digium TE210P card. I'm running kernel 2.6.10
and I've tried Asterisk (w/zaptel) 1.0.9, 1.2 beta, and CVS from today.
The results are the same for all versions:
Right after I reboot, and modprobe wct4xxp, my analog phone connected
to port 13 of the first channel bank (first FXS port) gets a dial
2009 Oct 20
2
Kernel panic w/ DAHDI 2.x/Digium TE220B
I've seen this consistently on three systems, with three different
cards, and multiple versions of DAHDI. At first I thought the issue
only occurred on newer, Nehalem-based, systems, but I reproduced it on
a Core 2 Duo box as well. I've tested with dahdi-linux 2.2.0.2, dadhi-
linux-complete 2.0.0+2.0.0, 2.1.0.2+2.1.0.2, and 2.2.0.2+2.2.0. The
card is a Digium TE220B which uses the