similar to: [Dahdi] "DAHDI_CHANCONFIG failed on channel 1"?

Hi all! I'm new with telephony cards and DAHDI drivers. I have installed Asterisk NOW 3.0.0 and update to Asterisk 11.7.0, modules are update too. I'm following the installation guide of Atcom [1] for AX1600P analogic card, modules are loaded [root at pbx ~]# lsmod | grep -E "hisax|netjet|dahdi" netjet 14618 0 isdnhdlc 4523 1 netjet mISDNipac

Hello I was editing files manually, and noticed that if I include the familiar "fxsks=1" in /etc/dahdi/system.conf, Dahdi fails loading: ===================== # cat /etc/dahdi/system.conf loadzone = fr defaultzone = fr fxsks=1 ===================== # /etc/init.d/dahdi start Loading DAHDI hardware modules: wctdm: [ OK ] /usr/share/dahdi/waitfor_xpds: Missing

I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and installed dahdi-2.2.1. kernel modules loaded. lsmod | grep wctdm wctdm 37233 0 dahdi 194985 1 wctdm lsmod | grep dahdi dahdi 194985 1 wctdm crc_ccitt 1549 2 dahdi,isdnhdlc dmesg: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.2.1

Hello On a brand new CentOS 5.5 host, I wanted to install Dahdi before installing Asterisk 1.4.x. So I untarred dahdi-linux-complete-2.4.0+2.4.0.tar.gz, followed by make, make install, make config. Next, I created the following files from scratch: ============ /etc/modprobe.d/dahdi.conf: options wctdm opermode=FRANCE ============ /etc/dahdi/modules wctdm ============ /etc/dahdi/system.conf

Hello No matter if I use the entry-level OpenVox A400 with a single FXO module or the most-often-garbage card from ww.x100p.com, I get the following error after just adding this card to Mini-ITX with a single PCI slot (OS = CentOS 5.4): ============ # lspci -v 03:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device b100:0003

Asterisk - 1.8.4.1 Dahdi-linux - 2.4.1.2 Dahdi-tools - 2.4.1 Kernel: 2.6.37.6 Kernel BKL: enabled I am upgrading Asterisk on this box. It has an OpenVox A400P PCI analog card with 1 FXO and 1FXS module. This server has been running just fine for two years with Asterisk 1.6.1.0 I've just upgraded all the OS and installed Asterisk 1.8.4.1. On trying to configure the A400P I get: # modprobe

Hello, I just made a asterisk / dahdi fresh install on Debian 8.4, and ended up with the following packages : $ sudo dpkg -l|grep -Ei 'dahdi|asterisk|libpri' ii asterisk 1:11.13.1~dfsg-2+b1 amd64 Open Source Private Branch Exchange (PBX) ii asterisk-config 1:11.13.1~dfsg-2 all Configuration

I'm trying to get a basic Asterisk configuration together for ISDN incoming / outgoing calls. I have two Cisco 7905g phones working (at least talking to each other) and have purchased a NETjet-S PCI ISDN card for routing calls to / from ISDN. The state I've managed to get it to is:- -- Executing Ringing("SIP/PHONE2-d557", "") in new stack -- Executing

Hi, I have done my best and tired of searching the net about the problem. If anybody could help would be a great favour. Description of Problem ------------------------ I am trying to install two Netpci cards(Traverse Technology Netjet ISDN-s) on Trixbox 2 and aim is to use in Asterisk as dailin and dialout. I compliled the driver as directed in the manufacture manual. After installation dmesg

Hello Unless I overlooked it, the "Asterisk Reference Information Version 1.6.1.6" at www.asterisk.org/docs doesn't include instruction on how to start Dahdi when used to drive a TDP PCI card (OpenVox A400P with a single FXO module www.openvox.cn/products/show.php?itemid=20&lang=2). I'd like to know... 1. How to start Dahdi manually. Is this the right way? modprobe

Hello, I just got my isdn-card working together with i4l and asterisk. Everything seems to be working fine: I can accept calls coming from the outside and I can dial out. Even setting the msn works like charm but my problem is that I cannot hear a word. There's complete silence in both directions. Any idea what could be the cause? Thanks for your help, Gunther Lspci: 0000:01:07.0 Network

Does Asterisk support Radius accounting?.... -----Mensaje original----- De: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] En nombre de asterisk-users-request@lists.digium.com Enviado el: Lunes, 17 de Noviembre de 2003 12:08 p.m. Para: asterisk-users@lists.digium.com Asunto: Asterisk-Users digest, Vol 1 #1912 - 11 msgs Send Asterisk-Users mailing list

I am attempting to get fax detection to work. I am using a NETjet-s card under ISDN4Linux. Asterisk does not seem to be detecting the fax tone. I have tried following as a test: [MainMenu] exten => s,1,Answer exten => s,2,DigitTimeout(3) exten => s,3,ResponseTimeout(5) exten => s,4,Background(Welcome) exten => s,5,Background(MainMenu) exten => fax,1,Dial(Zap/1,,d) [FaxTest]

Hi. I am having problems with dahdi using kernel 2.6.32. I am using 2.6.30 kernel and it works fine -- here is the output of dahdi_cfg -vv ++ dahdi_cfg -vv DAHDI Tools Version - SVN-trunk-r8670 DAHDI Version: SVN-trunk-r7445M Echo Canceller(s): Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 04: FXS Kewlstart

I'm trying to use a Teles (netjet) ISDN BRI card with asterisk 1.2.9.1 Anyone was able to use this card with asterisk? I couldn't find much information about it. Any help?

Hello, I am trying to use 2 netjet cards under asterisk and isdn4linux. I am having a hard time trying to get them to work in terms of dial out. Does anyone have a working config I could look at for even one card (tried that, not much luck either). When i dial out: -- Accepting AUTHENTICATED call from 172.16.11.2, requested format = 2, actual format = 2 -- Executing

Folks, I have a Xen Asterisk VM with a TDM400 card. When I try to run dahdi_cfg, I get: tempest:~# dahdi_cfg -vvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0 Echo Canceller(s): Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 01) Channel 03: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 03) Channel 04: FXS

Hi All; To overcome the echo problem, what mainly I have to do in the configuration other than the following line in the system.conf under dahdi directory? echocanceller=mg2,1-16 1) How can I know if the digium card supporting echo cancellator? 2) If I am getting a message in the consol that unable to enable the echo cancelator, then what does it means? The hardware is not supporting echo

Hi, Last weekend I was planning to buy a physical PBX system, but instead I have been blown away by the fact that VoIP really works, that Asterisk is so easy to set up and use... and free! We're in Australia, so as I understand it, we aren't allowed to use the Zaptel cards. We need to set up our system to route incoming 56K data calls to the PPP daemon on our Linux box or to our

Hi, I am receiving calls via a Netjet-S card on asterisk, and I notice that whenever I am talkimng to someone, if their voice is loud enough, sometimes asterisk generates a DTMF Tone as they speak. that is played to me. (Caller doesn't hear it). Any ideas how to stop this?