Displaying 20 results from an estimated 10000 matches similar to: "convert zaptel to dahdi?"
2009 Apr 02
4
meetme dahdi and zaptel
We recently updated our Asterisk (1.4.24) box from Zaptel (1.4.12.1) to
Dahdi (2.1.0.4). Everything seemed to go smooth with the exception of
meetme. Meetme seems to not be able to find a zap channel for conferencing.
We use voice introductions in our conference bridge and it seems to break
that feature. The error from the console is....
# app_meetme.c:2593 find_conf: No Zap channel available for
2008 May 20
7
Busy out a zap channel?
Is there a way to busy out a Zap channel? I have a customer who is
having problems with a line connected to a TDM800 card and we would like
to busy out that line. Since that line is the head of the hunt group I
cannot simply disable that channel, I need to busy the line so calls
will come over the other lines.
--
?Telecomunicaciones Abiertas de M?xico S.A. de C.V.
Carlos Ch?vez Prats
Director
2009 Nov 16
1
Problems with dahdi on asterisk 1.6.1.9 with TE122
Hello,
I am installing dahdi on a machine
lspci
00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev 01)
00:01.0 PCI bridge: Intel Corporation 3200/3210 Chipset Host-Primary PCI Express Bridge (rev 01)
00:06.0 PCI bridge: Intel Corporation 3210 Chipset Host-Secondary PCI Express Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
2016 Nov 11
3
dahdi_scan
lspci | grep Digium
03:05.0 Ethernet controller: Digium, Inc. Wildcard TE122 single-span
T1/E1/J1 card (rev 11)
dahdi_scan
So I have a card in a box - lspci shows it...
dahdi_scan reports nothing.
Is my card dead?
Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2009 Jan 19
4
Description of Zaptel/DAHDI E1 alarms
Hello,
I am missing any description of zaptel/DAHDI alarms. The TE200 series
user manual contains only a description of LEDs states. These alarms
states are visible in zttool/dahditool or in astersick CLI (zap show
status) and I wonder what is the real meaning of these alarms for E1
channel.
Possible alarm states (based on zaptel.h 1.2):
1. No alarms
2. Recovering from alarm
3. In loopback
2010 Jan 29
1
Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
Hi,
I have a tdm22b (2 fxs / 2 fxo)
When Asterisk is just started, outbound calls routing to fxo port, do not working with error:
Unable to create channel of type 'DAHDI' (cause 0 - Unknown)
Inbound calls to fxo port work fine.
After first inbound call, the outbound calls starts working.
CentOS 5.4
asterisk 1.6.0.21-1
dahdi 2.2.1.-1
Can anybody help me to identify what is the
2007 Aug 04
0
zttool says tdm800 is OK, but it won't recieve calls.
I have a TDM800 that is installed and working. (TDM800 + 2 X QUAD FXO).
Zttool says it is configured, ok, and there are no issues.
Ztcfg -vvv shows that all the channels are configured.
Zap show channels in the CLI show all 8 channels configured as they are
supposed to be.
When I plug in a pots line from the telco and make a call to that line,
asterisk does not respond. (No Starting
2010 Apr 06
2
polarity reverse
Hi,
I have a problem with polarity reverse
this my dahdi config
[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
2010 Nov 29
1
Trouble with TE122 on HP DL120G6 - can't disable USB
I have recently built a single-T1 Asterisk box using an HP DL120G6
with a Digium TE122 card.
I was finding that I was getting missed interrupts on the TE122,
causing the driver to report that it was increasing latency. It kept
doing this until the T1 did not work reliably.
I tried my usual procedure of disabling the USB subsystem in the BIOS
(or so I thought), but I found that the USB drivers
2018 Oct 02
4
Per host key authentication
*Problem I want to solve:*
We have 3 sites: A, B, and C.
Network admins should have access to all three. (this works as-is).
Desktop support should only have access to their site. (Tech A to site
A, Tech B to site B, Tech C to site C).
*How I think I can do it:*
Working with keys?
Admin's public key will be on all the client machines, and thus, the
client machines will always
2010 Oct 20
1
echo on TE122
I have setup a asterisk with freepbx, a TE122 and i have an ISDN.
My problem now is that callers are experiencing echo. checked on dmesg i
saw this:
# dmesg -c
dahdi: Disabled echo canceller NLP because of CED rx detected on channel 2
i searched google but found no soolution and i have no idea what that
error means.
below are other details that might be of value.
# dahdi_hardware
2010 Mar 05
4
Deadlock in Asterisk 1.4.29.1
Hello,
I have previously open a topic on the mailing list about deadlocking on
Asterisk 1.2.35.
After upgrading to 1.4.29.1 we still experienced the same problem :
Mar 5 12:05:56] DEBUG[8647] channel.c: Avoiding initial deadlock for
channel '0xb7689840'
[Mar 5 12:06:41] DEBUG[7130] channel.c: Avoiding deadlock for channel
'0xb7c04788'
[Mar 5 12:06:41] DEBUG[7130]
2019 Mar 21
9
Paging systems?
Does anyone have an (overhead) paging system that they like that works with SIP?
We've got a client with an old paging system that (supposedly) just takes an rj11 POTS connection, but when we put an SPA Cisco adapter on it, it doesn't auto-answer the call, so paging never happens.
[cid:image001.png at 01D4DFF6.9C1F1AA0]
Michael J. Munger, dCAP, MCPS, MCNPS, MBSS
Microsoft Certified
2010 Nov 27
1
DAHDI 2.4.0 produces HDLC errors with echo canceler
Hi,
After upgrading to DAHDI 2.4.0 from Zaptel, I noticed a lot of HDLC
errors on my console:
[Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Bad
FCS (8) on Primary D-channel of span 1
[Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Abort
(6) on Primary D-channel of span 1
These errors prevented calls from being made and received on my PRI spans.
This seems
2019 Mar 21
2
Paging systems?
You need more than an ATA. You need something with an FSO and FXO. I've used Linksys/SPA3102-3.3.6 and been happy with it.
From: asterisk-users <asterisk-users-bounces at lists.digium.com> On Behalf Of Sebastian Nielsen
Sent: Thursday, March 21, 2019 3:01 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion' <asterisk-users at lists.digium.com>
Subject: Re:
2010 Mar 02
6
Echo cancellation on DAHDI
Dear All,
How can we know the On board supports echo cancellation
I have *Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V (rev
02)*board
all working fine but sometimes i got echo when user are calling a PRI.
is there any way to know on board echo cancellation .
regards
Dhaval
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2009 Dec 08
5
Easy way to see what dahdi channels are being used
Hi,
I have just recently been using DAHDI, and I wanted to know how to monitor
capacity.
Let's say I have two DS1 (23 channels) coming in, one for Florida (let's
say) and one for New York. How can I get a reading of how many channels of
each T1 port is being used at any given moment? Ideally, have two values,
one for each T1.
dahdi show channels doesn't show outgoing
2020 Feb 18
1
Routing between networks
Problem:
I have four networks, A, B, C, and D
Networks B, C, and D should not be able to see each other.
Network A should be able to see all of them.
A - 172.16.1.1/24
B - 172.16.2.1/24
C - 172.16.3.1/24
D - 172.16.0.1/24
For host machine X, which is at 172.16.1.100/24 (network A), I added a
route for it to ping a machine (Y) on the network B:
ip route add 172.16.2.0/24 via
2010 May 28
1
[Dahdi/system.conf] "fxsks = 1" deprecated?
Hello
I was editing files manually, and noticed that if I include the
familiar "fxsks=1" in /etc/dahdi/system.conf, Dahdi fails loading:
=====================
# cat /etc/dahdi/system.conf
loadzone = fr
defaultzone = fr
fxsks=1
=====================
# /etc/init.d/dahdi start
Loading DAHDI hardware modules:
wctdm: [ OK ]
/usr/share/dahdi/waitfor_xpds: Missing
2007 Apr 02
1
Yeastar Cards
I am in the process of buying a TDM800 card from Yeastar (
http://www.yeastar.com/products.asp?TypeName=TDM800%20PCI%20Card&cTypeName=1 )
Any one has tested this cards? How reliable are them? I am specially interested
in the FXO/FXS module.
--
Gustavo Felisberto
(HumpBack)
Web: http://dev.gentoo.org/~humpback
Blog: http://blog.felisberto.net/
------------
It's most certainly GNU/Linux,