similar to: Problems with Asterisk and two Linksys SPA941

Hey all. My boss asked me to implement the following When DID 713xxxxxxx is dialed send an email to mmosier at xxx.com. with the time date and CID included in the email. I know how to code some but am looking for the best way to do this. Sorry I might have asked this a couple months back. I forgot. Mmosier Houston Respectfully Michael D Mosier Ftoc Certified -------------- next part

Dear Group, I have just purchased two Linksys SPA941 and flashed these to the latest firmware. Everything works well except for the Hold button? Has anyone else experienced the same issue? What was the solution? Kind Regards Shad Mortazavi

Hello, Yesterday night we have upgraded our Asterisk from 1.2.32 to 1.4.24.1 with lipbri 1.4.10, dahdi-linux-2.2.0-rc4 and dahdi-tools-2.2.0-rc2. Libpri and dahdi is only for dahdi dummy cause of the meetme function. After the upgrade we had the problem that some Linksys spa941 phone at one location could not dial out. incoming calls to the phones works without any problem, but outbound the

I have 8 aastra phones that are loosing registration. On the phone gui it says 408 as the registation error after a minute or say they register. In the cli it eill say the phone is now unreachable then it will show it registering then available. At first they did it every hour all the phones. After messing with the experation it does it every 15 nin. Any ideas on how to troubleshoot this? I tried

Dear all, someone can find what I doing wrong with the following function. It is for winsorisation mean. At my eyes it is ok, but for reason I sometimes it is changing the results when I change the k value. wmean <- function (x, na.rm = FALSE, k = 1) { if (any(i.na <- is.na(x))) { if (na.rm) x <- x[!i.na] else return(NA) } n

Hey Guys We are replacing a BM4 with a trixbox (asterisk) virtual numbers as the customer wants to move the callcentre. They are asking for an equiv to the ipview I gather HUD may be or the panel view The problem is that we need to see (a) total calls in the queue (b) calls for specific DID - How can you give 1 DID preference to another DID ie DID 61740410001 = Fred Electrical DID

Does anyone know how to set the distinctive ring on the Linksys SPA941? I want to be able to dial one extension and have the phone ring with a certain tone and then dial another and have the phone ring with a different tone. I have tried the following ------------------------------------------------------------------- exten => 802,1,SIPAddHeader(call_info=Classic-4) exten =>

Hi all, I'm new to this list, so forgive me if I'm not supposed to ask this: I currently own a Linksys SPA941 SIP phone with 5.1.8 firmware. Is there any way to use TLS with this phone<--->asterisk (v 1.6.0.9)? It is said that is supports TLS/SRTP but I don't see any of these options in the configuration file or the admin (advanced) SIP conf panel. Am I missing something? Thnx

Hi, I'm experiencing the same problem. We have 2 office locations and the Asterisk server is at one of them. At the other location, all SPA941 access the Asterisk server over an Internet link. All phones are set to "nat=yes" at the remote location. So my problem is that the MWI doesn't work at the remote location. The Sipsak messages are sent properly, but it's sent to the

I have an a bunch of SPA941 Linksys phones for users in and out of the office. When the phones are in the office (and on the same network as the asterisk server) the WMI goes on when it should and off when it should. But when the phone is on another network and natted it fails to do so. The light always stays off. Has anybody had a similar problem (and hopefully a resolve)?

Hi all, i know this question is not directly asterisk related - but i have no idea where else to ask. We do have around 50 pieces of LinkSys SPA941 - these phones do have a 2.5mm plug connection - and we do have many many headsets we used with normal PC's before (so 2x3.5mm plug connection). Does anyone here know where i can get an adapter 1x2.5mm -> 2x3.5mm ? Or can anyone here tell me

Hi all. The SPA941 and friends have pretty multicoloured LEDs, but there doesn't appear to be any support for SUBSCRIBE/NOTIFY as * as implemented for extension hinting. Has anyone managed to get the phone to support this? Thanks! -- David Zanetti <david.zanetti@catalyst.net.nz> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 -------------- next

Appearently SPA941 is less than a SPA942 without two ports, poe and backlight. There is less features too, it doesn't support BLF. Is it possible to hack 942-software into 941, or is there another workaround? Leif -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091112/0a6cbf82/attachment.htm

Hi i have buy a Audiocode Median 2000 VoIP Gateway and connect it on : 1 E1 30 channels 1 Lan Port Anyone use this equipements with asterisk ? because i am search a config sample for AudioCode and for Asterisk (i am new in VoIP). I want that all calls arrives on the AudioCode are sent to the asterisk by SIP (trunk ?) and all outgoing call from Asterisk are sent to the AudioCode. I

Hi i want change my asterisk server. Actually, Asterisk work's on a IBM Server with a internal digium E1 card. For High availability, i don't want now use "internal E1" card. In my new asterisk systems, i have two server and two E1 not in the same site. I am search a hardware gateway, if possible in 1U Rack with 2/4 or 8 E1 capacity with echo cancellation. I want that this

Hi it's possible into Asterisk 1.6.x to limit a call at 120 mn ? after 120mn, hangup and the customer call a new time thanks olivier

Hello list, I got a couple of those "wouldn't it be great questions", as following: 1. Is it possible, with asterisk to hold a central phonebook directory of callers?, so that when this party calls a "textual" caller ID will be displayed on the phone display. 2. How can this be configured with Trixbox, I've looked at the configuration options - I assume it plays no

Dear useRs, I have a list, each entry of which is a matrix of constant dimensions. Is there a good way (i.e., not using a for loop) to apply a mean to each matrix entry *across list entries*? Example: foo <- list(rbind(c(1,2,3),c(4,5,6)),rbind(c(7,8,9),c(10,11,12))) some.sort.of.apply(foo,FUN=mean) I'm looking for a componentwise mean across the two entries of foo, i.e., the

Hi we have a small problems. We have a Asterisk 1.6.1 old server with music on old. we have updated to AsteriskNow 11.4.0 and now, when we want play sound, we have a errors: -- Executing [334xx at Accueil_HNO:2] BackGround("SIP/SIP000005-0000000c", "Fermeture") in new stack [Jun 16 07:35:06] WARNING[7634][C-00000006]: file.c:701 ast_openstream_full: File Fermeture does

Hi i want use the API on my asterisk 1.6, but i have a small problems : In extension, i start it : exten => _X.,3,AGI(My-Script.agi) The perl agi file are started without problems but i want get into this script a lot of variable: Type (SIP or IAX) src (from cdr) but that's don't work: use Asterisk::AGI; use lib "/var/lib/asterisk/agi-bin"; $AGI = new