Displaying 20 results from an estimated 10000 matches similar to: "Maximum number of PRI calls on 1 asterisk box (no HW echo)"
2010 Nov 27
1
DAHDI 2.4.0 produces HDLC errors with echo canceler
Hi,
After upgrading to DAHDI 2.4.0 from Zaptel, I noticed a lot of HDLC
errors on my console:
[Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Bad
FCS (8) on Primary D-channel of span 1
[Nov 27 01:15:09] NOTICE[2743] chan_dahdi.c: PRI got event: HDLC Abort
(6) on Primary D-channel of span 1
These errors prevented calls from being made and received on my PRI spans.
This seems
2010 May 31
1
Suddenly "HDLC Bad FCS (8)" errors on ISDN-PRI, changed nothing
Hi fellow asterisk users,
I am running Asterisk 1.4.29 with an Digium TE121 card (wcte12xp kernel
module) an approx. 100 snom320. The whole installation is running
without issues since 5 months.
Without having changed anything on the asterisk server for at least 2
months, i noticed "clicking sounds" at external calls over the PRI.
Asterisk constantly throws the following messages:
...
2010 Jun 11
1
HDLC Bad FCS (8) on Primary D-channel
Hello,
I've got a running system in which logs are full of messages such as:
[Jun 10 07:24:14] NOTICE[2414] chan_dahdi.c: PRI got event: HDLC Bad FCS (8)
on Primary D-channel of span 2
The strange thing is those messages are coming from a single span.
My setup is :
Asterisk 1.6.1.18
Junghanns OctoBRI
with wcb4xxp driver
libpri 1.4.10.2
dahdi 2.3.0
3 BRI lines in PtMP mode
What does this
2011 Jun 01
10
busy hangup HDLC Bad FCS (8) on Primary D-channel
Hi all,
After running fine for a few months now asterisk seems to hang
frequently , still functioning but the DAHDI channels seem busy (users
report a busy signal when calling or being called)
A reboot will allow it to run for another day or maybe 2 or 3 till the
problem occurs again.
running stock Asterisk 1.6.2.9-2+squeeze2 on Debian with stock kernel
2.6.32-5-686
i get the following
2011 Aug 16
1
PRI Problem
I am having a problem with a new PRI turn-up on dahdi 2.5.0 and
asterisk 1.8.5 that I have not seen before. The PRI is setup as B8ZS,
ESF and the span shows up and ok. This PRI is merely a crossover T1
going into an old DC0 class 5 switch.
I am getting the following errors over and over again
[Aug 16 10:26:10] NOTICE[8002]: chan_dahdi.c:3043
my_handle_dchan_exception: PRI got event: HDLC Bad FCS
2009 Sep 18
1
No more room in scheduler
Hi,
I running into the following problem on my Asterisk setup:
--snip--
[Sep 3 01:40:59] NOTICE[9170] chan_dahdi.c: PRI got event: HDLC Abort
(6) on Primary D-channel of span 3
[Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: No more room in scheduler
[Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: Asked to delete sched id -1???
[Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: No more room in scheduler
[Sep
2009 Jul 19
3
DAHDI Error and poor audio quality
Hello Team
I have installed the new DL580 and used the new TE420B to add capacity on
our ivr. Before I put new E1?s I decided to first move the old e1 from the
old system to this new one but it has errors which not only affect the
audio quality, but also cause the asterisk to refuse any call after
sometime even though the channels seems up and active {seems d-channel
fails}..
When processing
2009 Jan 28
1
E1 conection to a Cisco2600
Hi
I am trying to connect asterisk with a Cisco GW 2600 with E1 pri using a
Digium, Inc. Wildcard TE210P dual-span T1/E1/J1 card 3.3V (rev 02),
Errors:
[Jan 28 17:32:33] VERBOSE[6182] logger.c: == Primary D-Channel on span 1
up
[Jan 28 17:32:33] WARNING[6182] chan_dahdi.c: PRI Error on span 0: We think
we're the CPE, but they think they're the CPE too.
[Jan 28 17:32:34] NOTICE[6182]
2006 Dec 28
1
TE110P with Qsig
Hi all, as good?
I am trying to go up a board TE110P with link E1 ISDN PRI to establish
connection with a central office Siemens HiPath 4000. But I am having the
following errors:
Server1:~ # asterisk -r
Asterisk 1.2.10, Copyright (C) 1999 - 2006 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty'
2007 Sep 13
2
Fwd: Bad FCS error
---------- Forwarded message ----------
From: Jan Prunk <janprunk at gmail.com>
Date: Sep 13, 2007 3:35 PM
Subject: Bad FCS error
To: asterisk-users at lists.digium.com
Hello !
I am getting the following error in asterisk logs:
Sep 11 17:33:30 NOTICE[2187] chan_zap.c: PRI got event: HDLC Bad FCS (8) on
Primary D-channel of span 1
Sep 11 21:45:08 NOTICE[2187] chan_zap.c: PRI got event:
2010 Dec 16
1
PTMP BRI Unable to receive TEI from network in state 2(Assign awaiting TEI) - Asterisk 1.6.2, Latest DAHDI, LibPRI
Hi all,
Last night I went to replace an Asterisk 1.4 + mISDN + b410p box with
Asterisk 1.6.2 and DAHDI BRI - to no avail.
I had two servers so copied network setting etc from the working one,
moved the card across, ran dahdi_genconf etc and it didn't work.
Here's the console output with notices disabled:
lucas*CLI> pri intense debug span 1
Enabled debugging on span 1
[Dec 16
2009 Oct 05
2
dahdi dies with "No more room in scheduler"
Hi,
I noticed that Dahdi starting producing these error messages:
ERROR[29250] chan_dahdi.c: No more room in scheduler
ERROR[29250] chan_dahdi.c: Asked to delete sched id -1???
during which time I could not send any calls or receive calls on at
least one of my Dahdi spans.
The only way to clear the problem seemed to be to restart Asterisk.
It appears to start after the following message
2005 Jul 04
1
HDLC bad FCS
I have 2 servers, configured identically. Each has a TE405P and 2 PRIs. One server was experiencing crackly audio on one circuit, accompanied by HDLC
bad FCS messages. The telco recabled and moved me to another port on the DMS-100. The audio is better, but there are still bad FCS problems on the
span. I have moved the PRI in question to the other server, and the problem does indeed move with the
2006 Dec 20
5
Sangoma A101 with Unicall
I am having a problem trying to get a Sangoma A101 to work with
Unicall. I have installed the sangoma drivers and everything seems to
be well but when I try to run ztcfg I get the following error:
CAS signalling on span 1 conflicts with HDLC with FCS check on channel
16.
Here is my /etc/zaptel.conf
# MFC/R2 normalmente no usa CRC4
span=1,0,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101
2006 Mar 31
2
PRI issues
Hi everyone,
I have been having some problems lately with our PRI and Asterisk, or
maybe it is just me. It happens once maybe twice a day, but when some of
our customers are calling in, the phone just drops on them. I pulled the
information below from the log from one that happened. I notice why it
is happening, but I can't seem to figure out a way to stop it from
happening. I also
2005 Mar 17
2
TE110p card with Euro ISDN (Ericsson switch)
I am trying to use TE110p card for Euro ISDN with Ericsson AMS switch. I
consistently get one of the following errors:
PRI got event: HDLC Abort (6) on Primary D-channel of span 1
or
PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 1
My zaptel.conf file:
--------------------------------
span=1,0,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
loadzone=us
defaultzone=us
2005 Jun 29
4
PRI got event: HDLC Abort (6) on Primary D-channel of span 1
I receive this error on the asterisk console and it is pretty much
ALWAYS coming up.
Sometimes there will be a break where it does not display.
We had our PRI provider test the lines and they claim that there is no
signalling problem.
It doesn't matter if there are no calls or if there are 10 calls in
progress the error is still displayed.
I also get an annoying popping or clicking sound
2007 Jan 25
2
TE110P and HDLC problems
Hi!,
this issue makes me crazy. I read a lot of docs, also * mailling list
and I try a lot of things without success.
Any help will be appreciated. Here is the info:
Hardware:
--------------------------------------------
Supermicro Server with motherboard X7DB8, chipset Intel 5000P, Xeon 5050
Digium TE110P
Software
---------------------------------------------
Asterisk version 1.2.12.1
2007 Feb 14
1
CAS signalling on span 2 conflicts with HDLC with FCS check on channel 20
hello my friends,
when i make a genzaptelconf i get this message
********************
CAS signalling on span 2 conflicts with HDLC with FCS check on channel
*******************
Any idea Please?
I m installing zaptel 1.4
i checked in "http://bugs.digium.com/view.php?id=7860" that it's a bug
but beacause i m a newbie in asterisk i can't undrestand what exactly mean
Thank You
2012 Nov 03
3
PRI got event HDLC Abort
hi folks.
recently some of our customers complained about bad voice
quality on the phone system. i looked at the logs and found
a lot of these:
[2012-11-03 08:26:38] NOTICE[11305] chan_dahdi.c: PRI got event: HDLC Abort (6) on
D-channel of span 1
[2012-11-03 08:26:45] NOTICE[11305] chan_dahdi.c: PRI got event: HDLC Abort (6) on
D-channel of span 1
[2012-11-03 08:26:54] NOTICE[11305]