similar to: G.711a or G.711u ???

Dear, I need to create a custom device extension in order to dial a local queue. Suppose my queue number is 8888, how can fill the Dial field from the custom extension ??? Because if I put just 8888 or Local/8888, I don't succeed. Thanks a lot

Dear, I have asterisk 1.6.2.13 in a small hardware PBX (512 GB RAM and Celeron), and last days when I call from one extension to another of the same PBX after I dial the number the rings sound after 20 seconds. In the CLI log, when I debug the AGI, I see always goes good until dialparties.agi, and after that there are 20 seconds without any log, and so the ring sound. I've read

Dear all, I have to install an E1 card in my Asterisk 1.4.23 server and here is my short question: Is it necessary to install or update any Asterisk/Zaptel/Any extra module or the default installation is good enough to just plug and run the E1 card ???? Thanks a lot Alejandro

Dear all, I have Asterisk 1.4 with SIP. I have a voicemail implemented with GSM sound files. The problem is I have IP phones Utopix HyperPhone 202 which support only G.729a/u and G.723.1 high/low, but not GSM. If I choose G.729A the "pass-throu" calls among users are OK, but Asterisk can't transcode GSM to G.729A in voicemail calls. My company doesn'y want to pay for a G.729

Dear all, I need to build a PBX based on Asterisk for a call center. I have worked with raw Asterisk but it's hard to work for big implementations think. Also I have worked with Trixbox CE for a small bussines and it was prette good, but I have not have many features like ACD. I know there is another version called Trixbox PRO -specially Call Center edition- that's not free but has got

Dear all, I'll install Asterisk 1.4 in an IBM xSeries 226 server with four HD's available, using CentOS as the OS. What's the best RAID type recommendation ??? RAID 1 or RAID 5 ??? Regards Alejandro

Dear all, I've read that Asterisk supports only the G.729 A audio codec. I have several Grandstream IP phones with G.729 A/B codec implementation. Does G.729 A/B mean both version A and version B, or A/B is a new version different from A and B and it's not supported by Asterisk ??? Thanks a lot Alejandro

Dear, I have two Asterisk PBXs with an E1 interface/RJ-45 port in both boxes. I need to connect both PBXs with E1/R2 and UTP cable. What are the requirements to deploy the UTP cable ??? Straight-through or crossover ??? What are the pinouts in both peers ??? Thanks a lot, Alejandro

Dear, when I dial *30 in order to get instructions to blacklist an extension, Idon't get the menu but I get a new dial tone. What happen please ??? What can I do to solve this ??? Thanks a lot, Alejandro

Dear all, I have an Asterisk SIP PBX using GSM codec at peers and in voicemail sounds files (I have Spanish sounds). But now I have a problem because I have to use G.729 mandatory at peers, and I have GSM in voicemail sound files. I can't let Asterisk do trascoding because I have no a DSP in the CPU, and I don't want to degrade the PBX performance with trascoding tasks. So how can I

Dear all, I use Trixbox as my PBX. Until a couple of days I've installed a GSM Gateway to communicate with our three cellular phones: 15 64227777 15 64228888 15 64229999 The GSM Gateway has just one SIM. I use the Free PBX web interface in order to set up the route and trunk parameters: Trunk: ******* Name: SIM1 Peer details: host=10.10.1.2 (IP from GSM Gateway) port=5060 type=peer

Dear all, I've read some news about Sisky (http://www.yeastar.com/Products/SiSkyEE.asp), a service to interconnect Skype clients with SIP clients. Does anybody test Sisky and can tell me about his experience ??? (Sisky runs on Windows because Skype and its API are more stable on this OS). Regards, Alejandro

Dear all, I have implemented an Asterisk SIP server for a WAN VPN over Internet. We have users distributed along all my country (Argentina) that register to my Asterisk in order to talk among them. I'll plan to have voice and voicemail with GSM codec, because we can't afford the payment for the G.729 licenses (it's an administrative problem of our company, not an echonomical problem).

Dear all, I have Asterisk managed by a FreePBX web console, and I want to add an external dial code, in order to dial 9 to get external line/tone for outgoing calls to the GSM network through my GSM gateway. Where from Asterisk/FreePBX can I setup this feature ??? Thanks a lot. Alejandro -------------- next part -------------- An HTML attachment was scrubbed... URL:

Dear all, I need a call center asterisk's based solution and I see there are two important solution for 120+ agents: VicidialNow and ViciBox Can you tell me the difference between these open source call center solution please ??? Special thanks Alejandro

Dear, I have an Asterisk PBX with two E1 cards: Digium TE122 and Sangoma A101D. Sangoma card has SNMP support but Digium card has not, and also SNMP does't give me ral time information. Within CLI Asterisk I execute "dahdi show channels" but I don't get information about channels usage. What is the best way to have real time monitoring of E1 channels usage and status ???

Dear, I always had one E1 card with one span, so I've never had any problem in set it up through /etc/dahdi/sustem.conf and /etc/asterisk/chan_dahdi.conf because I put span=1. But now I have a PBX with two E1 cards with 4 span (8 span in total). How do I have to define both card in system.conf and chan_dahdi.conf, and how do I have to refer each span to the corresponding card ??? Thanks a

People, I will install asterisk on my Debian Etch box without a PSTN interface card. I want to use only softphones for the moment. My question are: 1) Is it enough to install with "apt-get" the asterisk 1.2 or do I have to get asterisk 1.4 manually ??? 2) Do I have to configure a dummy PSTN interface in my case ?? And if you have a debian-asterisk howto, I really thank you. Regards,

Dear, I have this scenario: - PBX Asterisk 1.6.2.10 with private IP 192.168.0.10 - Behind a Cisco ASA firewall that connects to Internet - SIP trunk to Net2Phone with these parameters (nat=no): host=200.58.113.60 username=DOLLY secret=123456 port=5060 type=peer dtmfmode=rfc2833 disallow=all allow=alaw&ulaw nat=no canreinvite=no qualify=yes -Softphones Xlite The PBX can't register to

Dear people, is it possible to have presence using Asterisk 1.2.13 / SIP with Linux/Debian Etch??? I'd like to see if my intranet contacts are available, busy, disconnected.... Thanks a lot Alejandro