similar to: Which spandsp to use with 1.6.2?

To provide a reliable fax solution for users connected to a Asterisk 1.6.2.6 server i have tested a few T.38 capable ATA's: - Patton M-ATA - Grandstream HandyTone 486 - Fritz!Box 7170 I have tried Asterisk 1.6.2.6 compiled with SpanDSP-0.0.6pre17 and also Asterisk 1.6.2.6 with Fax for Asterisk installed. These Asterisk servers are connected to a Cisco PGW 2200 + AS5400XM. Sending fax

hi folks. i recently upgraded asterisk to 1.6.1.17(from 1.2) and i'm having problems with fax. after receiving fax with the ReceiveFAX app. everything seems ok. the .tiff file was there, phone line seems to hang up. then asterisk will crash. any ideas? also i looked in the log file. this is what before it crashed: [Mar 8 12:12:12] WARNING[30115] app_fax.c: WARNING T.30 ECM carrier not found

Hi, Maybe I missed it while checking it, but which spandsp version is recommended to play with Asterisk 10 and T.38/T.30 gatewaying ? I can see both spandsp-0.0.6pre17.tgz and spandsp-0.0.6pre18.tgz here (http://www.soft-switch.org/downloads/spandsp/) but I couldn't find a changelog documenting differences between them. So I prefer to double check ask for recommendations. Regards

Here's a call coming in over PSTN to dahdi/4, connected to a local extension dahdi/1: -- Executing [s at incoming-pstn-line:1] Answer("DAHDI/4-1", "") in new stack .......... -- Executing [s at incoming-pstn-line:6] Dial("DAHDI/4-1", "DAHDI/g0,36") in new stack -- Called g0 -- DAHDI/1-1 is ringing -- DAHDI/1-1 is ringing

Hi, I am recently updated my asterisk 1.4.1 to 1.6.2.6 because of fax service. I have installed spandsp 0.0.5, then 0.0.6 pre 17 as well because to have support. app_fax is available in menuselect and loaded into my asterisk. The upgrade went without any problems. ast*CLI> module show like fax Module Description Use Count app_fax.so

This message is pointed directly to Steve Underwood. I tought it would not be nice to directly email him with a question that interests a good part of the Asterisk community, so here it is. :) Steve, remember a few days ago when we discussed about issues on Asterisk 1.6.1.13 and T.38 fax reception? Well I opened an issue on Mantis (https://issues.asterisk.org/view.php?id=16756) and turns out it

Hello- Firstly thanks very much for the work you have put into SpanDSP and the time you spend to assist people here :-) I am currently running SpanDSP 0.0.5 with Call Weaver. Is there any or sufficient gain to be had from upgrading SpanDSP? Michael

Using spandsp-0.0.6-pre17, SendFax on 1.6.1.18 and ReceiveFax on 1.6.2.8. Sip.conf on both sides has t38pt_udptl = yes. -- Executing [s at fax-tx-test:3] SendFAX("SIP/side-sip-00000009", "/var/spool/asterisk/fax/20091113_1455.tif") in new stack [Mar 20 17:05:34] WARNING[6433]: app_fax.c:178 phase_e_handler: Error transmitting fax. result=49: The call dropped

Hi, With 0.0.6pre3: # ./build.sh CMake Warning (dev) in CMakeLists.txt: No cmake_minimum_required command is present. A line of code such as cmake_minimum_required(VERSION 2.6) should be added at the top of the file. The version specified may be lower if you wish to support older CMake versions for this project. For more information run "cmake --help-policy CMP0000".

Hello, In my scenario, the asterisk machine is installed behind a CISCO mediaGW in order to be able communicate with the PSTN. Asterisk is configured to use T.38 to send and receive faxes. I'm trying to receive a fax from a fax machine located in the PSTN. Apparently everything goes well: the fax machine says the transmission was successfully completed, and the fax file is successfully

New asterisk user, pretty much set up except for spandsp. I get the following when trying to compile: app_rxfax.c app_rxfax.c: In function `phase_e_handler': app_rxfax.c:92: error: structure has no member named `cid' app_rxfax.c:92: error: structure has no member named `cid' app_rxfax.c: In function `rxfax_exec': app_rxfax.c:260: error: structure has no

You now need to compile and install SpanDSP-0.0.6pre3 at least (AGX has been changed). After you've done that - try AGX again. HTH -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Olivier Sent: 11 March 2009 06:16 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users]

Hi! Have probably not understand how fax is working in Asterisk 1.6. I did install: ptlib-v1_12_0 h323plus-v1_19_7 dahdi-linux-complete-2.2.0.2+2.2.0 spandsp-0.0.5 asterisk-1.6.2 asterisk-addons-1.6.2 make menuselect in asterisk-1.6.2 source directory shows: [*] app_fax But "core show applications" doesnt show me any "fax applications" and when I try to receive a fax:

Has anybody been successful with compiling the pre3 version of SpanDSP on the current Asterisk CVS? I'm getting: app_rxfax.c: In function `phase_e_handler': app_rxfax.c:77: warning: implicit declaration of function `fax_get_transfer_statistics' app_rxfax.c:78: warning: implicit declaration of function `fax_get_far_ident' app_rxfax.c:79: warning: implicit declaration of

Hi, I've installed spandsp-0.0.4pre16 With this: cd ~ svn co https://agx-ast-addons.svn.sourceforge.net/svnroot/agx-ast-addons agx-ast-addons<https://agx-ast-addons.svn.sourceforge.net/svnroot/agx-ast-addonsagx-ast-addons> cd agx-ast-addons/trunk ./build.sh I've got this: CMake Error in spandsp-0.0.4/CMakeLists.txt: Cannot find source file "app_fax.c". Tried

Hello: I dont know, if is my question to do hier, or in the dev-list, but anyway: I 've installed Asterisk (head, development because I need Realtime), but when I try to apply the patch I 've got many errors, reason why I wrote myself the apps/Makefile. (Of course, first, I compiled spandsp, etc.) Then, I try to compile Asterisk, but it 's impossible: The output: >

Hey guys I was hoping I could get a few pointers on a problem I have been trying to debug for the last couple of months regarding asterisk AGI scripts and unexpected termination. I have this agi script that accepts incoming faxes using RxFax on the latest asterisk 1.4 branch. Its written with perl and it works fine except for one line that causes the entire script to terminate unexpectedly. The

more detailed output Sep 21 15:54:31 DEBUG[1120357296]: pbx.c:1255 pbx_extension_helper: Launching 'RxFAX' Sep 21 15:54:31 DEBUG[1120357296]: channel.c:1699 ast_set_read_format: Set channel Zap/1-1 to read format SLINR Sep 21 15:54:31 DEBUG[1120357296]: channel.c:1666 ast_set_write_format: Set channel Zap/1-1 to write format SLINR Changed from phase 0 to 1 Slow carrier up Slow carrier

Greetings- Working with the T.38 gateway functionality that is sparsely documented [1] , I'm attempting to get the following functional: Asterisk calling system -> Asterisk system in T.38 Gateway Mode (box in question) -> SIP Provider The problem is: -The provider is not initiating a reinvite to T.38, even though it is 100% supported -Asterisk is not detecting the CNG tones from

On 1.6.0.18-rc3 using app_fax.so, spandsp-0.0.5, anytime I use SendFAX asterisk restarts: [Nov 15 19:00:36] VERBOSE[17013] logger.c: -- Executing [s at fax-tx-test:1] ESC[1;36;40mNoOpESC[0;37;40m("ESC[1;35;40mSIP/nhi-rive rside-sip-00000000ESC[0;37;40m", "ESC[1;35;40mContext fax-tx-testESC[0;37;40m") in new stack [Nov 15 19:00:36] VERBOSE[17013] logger.c: --