similar to: Aastra, Asterisk 1.4 and Voicemail

Quoth: OCG Technical Support <support at ocg.ca> > >Although we've programmed the softkeys per the manuals, they seem to have no >effect (just dead). For example, our 57i is setup like this: I had similar problems and ended up using the speeddial inband functionality. FWIW, my 57i's setup like so: softkey4 type: speeddial softkey4 label: "*Park" softkey4

Getting "no service" display on aastra 480i. Sip debug shows an "unathorized" blub when the aastra tries to register. Some reading indicates that 1.4 firmware wants aastra.cfg and mac.cfg in /tftpboot/. There are none. Anyone have basic config files? Or can point me to a good link? All links I have tried, that purport to have config files, are either dead or error out.

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

There is no release note, just a text file that says AASTRA TELECOM INC. February 2006 FC-000046-01-07.st - 9133i Generic SIP Firmware 1.3.1.1095 for customer release. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Gareth Owen Sent: 15 February 2006 02:00 To: asterisk-users@lists.digium.com

Hi, I`ve been toying with an Aastra phone (9143i) wondering if it could be a good alternative to to the more expensive Polycom phones. One thing which I can't figure out, although it certainly looks simple, is to update the firmware though FTP (not TFTP). I have set the ftp provisioning server in the Aastra phone, and put the firmware file 9143i.st in the root folder where the

I'm in the process of converting our current hybrid key system to Asterisk and Aastra 57i phones. One of the features that seems to be a show stopper for almost everyone in the office is the inability to see who is on the phone. Can someone point in the right direction to setup an XML app on the phone so they can press a soft-button and get a list of extensions and their statuses? I know I can

Sorry for being a little off topic, but I'mconsidering a few new phones for my Asterisk installation. I have a mix of Polycom 500/600s and an Aastra 480i CT. I'm considering adding a couple of Aastra 57i or 57i CT. Does anyone here have experience with the 480i CT and the newer 57i CT? I'm curious as to the real differences. Thanks, Michael Graves Sr Product Specialist Pixel Power

Hi, I'm currently trying to connect an Aastra 57i to our Asterisk Server. The strange thing is, that altough I have definitely entered the correct IP address of the server, the phone doesn't even attempt to register. Here is the configuration file (local.cfg) of the phone: firmware md5: dee6e938b469e217a87138076f47fe41 boot count: 1 tone set: Germany language 1: German time server1:

Hello All, I have a need for a wireless solution and have been looking at the Aastra 57i CT phone that have the wireless handset with them. Aastra says they will cover "up to 300,000 square feet". I am finding this hard to accept. I was also wondering about the "secure WDCT cordless technology" Could this be a form of DECT? Any one using these that can shed some lite?

Hi, Just started using an asterisk-based PBX with Polycom IP501 phones. Am Fairly satisfied and am starting to get into FTP setup of the phones. Have figured out most things except for how button remapping works. In sip.cfg, I have this entry: <keys key.IP_500.31.function.prim="DoNotDisturb"></keys> This works as expected but if I try to change the remapping to any

I need to buy some new phones for our own offices. I've used only Polycom phones until now, but I'd like to broaden my experience. I'm trying to decide which phones to experiment with. I have these options: - A combination of Polycom, Aastra and Snom - Just Polycom One the one hand, I'd like to keep things uniform, since it greatly simplifies provisioning. On the other hand, I

We have 4 employees and we're running Cisco 7970 phones. Each phone has a unique SCCP line configured (in the autologin area of the sccp.conf file) for each employee. We have hints set up in the extension.conf file like the following: exten => 101,hint,SCCP/101 exten => 102,hint,SCCP/102 exten => 103,hint,SCCP/103 exten => 104,hint,SCCP/104 We have speeddial= lines set

I am currently testing a 57i unit. No problems configuring the phone's config via phone/web UI. We are trying to avoid using the web UI, the reason is it will take a long time typing the softkey xml applications URIs on each phone, so we chose TFTP. Tried configuring the phone via a TFTP config server, but no changes took effect. I wonder why it doesn't work with TFTP even if I was able

I'm having problems getting my aastra 480i to register with the asterisk server. I can inititate calls from the phone, but >sip show peers does not show any IP address registered for this phone. I am probably missing something stupidly simple. Anyone have an example config to share or corrections for my configuration? Asterisk 1.2 aastra 480i CT has the 1.4 firmware <sip.conf>

I have a Asterisk server (PBX in a Flash) with Aastra 57i phones. When there is an incoming call the phone will display two buttons "answer" and "ignore". If you press "ignore" the call is dropped instead of sent to voice mail. The following is the log: -- Called 111 -- SIP/111-00001c14 is ringing -- Got SIP response 486 "Busy Here" back from

Hi, We have a few Aastra 480ci phones and we've noticed that in order to get the phone to receive a call, qualify must be = no. Apparently the Aastras do not respond to the qualify message (or respond in a way Asterisk doesn't understand) and Asterisk thinks the phone is unreachable. However, this now prevents MWI from working properly on the phones. Does anyone know how to get MWI

I realized today after much playing around that the Aastra 480i phone (I'm assuming the others as well), will freeze and can be reproduced if all of the following is true: 1. You enable auto answer in the configurations 2. You call from an Aastra phone to another Aastra phone using the alertinfo that auto answers the phone. 3. You hangup and then try using a softbutton programmed as a

Aastra Telecom has released SIP v1.3.1 firmware for the Aastra range of IP phones (480i, 480iCT, 9112i and 9133i). The firmware and release notes (no updated admin and user guides yet) are available for download at: http://www.aastra.com/support/enterpriseip Contrary to what the version numbering would suggest, this is a significant update with many new features and bug fixes. See the release

Anyone know what the POE draw is for the Aastra 480i phones? We have switches that will do 15 watts on 12 ports but only do 7.7 watts on all 24 ports. A Cisco 3560 switch will do 15.6 watts on all 24 ports. Just trying to find out if we need that much power. Can't seem to find any info on the Aastra site. Comments?

Hi, Has anyone had experience with the Aastra 57i / 57i CT phones? The problem I'm having is that the phone isn't re-registering itself with the Asterisk server. As a result, the phone loses the registration with the server and is no longer able to receive incoming calls. Outgoing calls work fine. Right now, I have the following sip registration settings: sip registration period: 180