similar to: Problem with BLF's

In testing Asterisk 11, I've found that Asterisk doesn't seem to be sending BLF updates to SIP peers that have subscribed to a hint looking at a Custom device if that Custom device state is RINGING or RING_INUSE. All other states seem to be working correctly. The hint section of the dialplan is: [hints] exten => _3XX,hint,Custom:${EXTEN} Console shows the following for core show

Struggling with an IP650 and 7 IP335s this morning. I have the following hints defined (courtesy of FreePBX 2.9): extensions_additional.conf:exten => 300,hint,SIP/300 extensions_additional.conf:exten => 301,hint,SIP/301 extensions_additional.conf:exten => 302,hint,SIP/302 extensions_additional.conf:exten => 303,hint,SIP/303 extensions_additional.conf:exten => 304,hint,SIP/304

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Polycom Phones (updated for 3.2.X firmware with asterisk 1.6.1 Jan/2010) With SIP 3.2.X firmware (available on the Polycom download site) and Asterisk 1.6.1, Polycom phones now support a full featured BLF showing statuses of Ringing, Inuse and Online and one touch directed call pickup. On the asterisk side all that needs to be done is to add a hint to the extension and enable directed pickup.

Without call-limit defined, when a sip extension calls another sip extension then "show hints" shows that both are InUse (as expected). When one of them hangs up, both hints status become "Idle" (as expected). With call-limit=1 for each SIP extension: the caller is always Idle while the callee is InUse. Is this behavior normal? Doesn't sound right because if, during the

I?ve been trying for quite some time now to make hints work correctly, so that I may use the BLF (busy lamp field) features of the Snom and Grandstream models that support it. My problem is NOT a subscription problem. I have a running Asterisk system, everything is as it should be, hints are in the dialplan as they should be etc... My problem is: If I configure my phones in sip.conf as

Arch = x86_64 OS = CentOS-6.4 (freepbx) Asterisk = 11.4.0 FreePBX = 2.11.0.2 We use Snom870 handsets with firmware v.8.7.3.19. I am trying to develop a custom dial plan to invoke a distinctive ring-tone when an external call is transferred internally. Based on an earlier solution I discovered I am attempting this: [from-internal] include => set-alert-if-local [from-internal-original]

I see a lot of these on an otherwise idle Asterisk 1.6.0.15: Extension Changed 773[Hints] new state Ringing for Notify User 792-00041327d17e-1. Then a little while later it changes to InUse or Idle, completely randomly. It happens for many different combinations of phones and watchers. There are no calls being made, so I can think of no reason why this happens. Obviously it wreaks havoc with

r> <h2>Polycom Phones (updated for 3.2.X firmware with asterisk 1.6.1 Jan/2010= ) </h2>With SIP 3.2.X firmware (available on the Polycom download site)=20 and Asterisk 1.6.1, Polycom phones now support a full featured BLF=20 showing statuses of Ringing, Inuse and Online and one touch directed=20 call pickup. <br>On the asterisk side all that needs to be done is to add a hint

I used to run Asterisk 1.4.4 but had to revert back to 1.2.13 to minimize a bug we were coming across. 1.4.5 looked promising, but the hints are broken and making it so I'll likely have to go back to 1.2.13 until I get the hints fixed. I'm using Grandstream phones & hints on the parked extensions. I should also clarify that when I upgraded versions, I renamed all Asterisk folders

Hi, I'm having problem with call parking. When I park call, either via transfer to xten or park digit sequence from features.conf, I hear the parking lot number read to me and the user gets transferred. However, MOH stops for the caller the moment user is transferred. The user can be retrieved by dialing the parked extension and voice resumes. If the parked user hangs up, the channel state

I've installed Grandstream GPX-2000 phones and have successfully enabled one of my buttons to use Asterisk BLF for an extension. I can tell when this extension is available, is being rung, or is on the line. I'd like to do the same for my Zaptel channels, to be able to see when a line is onhook, ringing or offhook. I tried the following but alas, it doesn't seem to be working:

I've got hints setup for my MeetMe conferences like so: exten => _60X,hint,MeetMe:${EXTEN} and they show up in "core show hints" like so 600 at dialtone : MeetMe:600 State:Unavailable Watchers 1 _60X at dialtone : MeetMe:${EXTEN} State:Unavailable Watchers 0 I'm wondering why they're Unavailable instead of

Man, I really feel stupid, but after banging my head on a brick wall for several hours ... I need help! I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten 5707, and I've got an xlite on 5608. When I make a call from an outside line, I dial SIP/5608. The little blinky light on the GXP that's monitoring 5608 goes, well, "blink blink". :) I then press

Hello, all. I've got a problem where we set up call pickup for a customer. If the Bob's extension rings and Bob is in Jim's office, Bob can press the button on his Snom 320 that says "Bob" and pick up his line. It works great for calls coming in from the outside but does not work for internal calls. Internal calls generate a app_directed_pickup.c:204 pickup_exec: No

supported, beside Idle, On call and Ringing ? Can we expect this list to match DEVICE_STATE's one (UNKNOWN | NOT_INUSE | INUSE | BUSY | INVALID | UNAVAILABLE | RINGING | RINGINUSE | ONHOLD) > Might be worth seeing if other phones do the same. > > S > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by

On one installation (* 1.2.13) Pickup doesn't work. This is what I have in extensions.conf exten => _**2X,1,Pickup(${EXTEN:2}&8${EXTEN:3}&t&uevents) exten => _**2X,n,Hangup This is what I get on CLI -- Executing NoOp("mISDN/3-1", "incoming-beronet 80 - dolazni poziv s broja 270248") in new stack -- Executing LookupCIDName("mISDN/3-1",

I have a system running Asterisk 11.2.1 that has had a couple calls between internal extensions get "stuck open". I didn't catch the verbose log for the first one, since I generally don't verbosely log to file, but the second one shows that the call that got stuck was dialed, but the caller hung up before the called device answered. This server is running a hotdesking

Hi gang, Since I'm getting no joy from device_Status or SIPPEER in 1.4.26-rc1, I thought I would do an AGI to read my hints and check for line in use that way. The AGI works fine from a prompt, but returns the dreaded "utils.c:966 ast_carefulwrite: write() returned error: Broken pipe" when I try to run it from the dialplan. Here is my dialplan snippet;

Group I'm having some trouble with asterisk and the page cmd. Any help would be great! This is what's in my extensions.conf exten => _**2,1,SIPAddHeader(Call-Info: answer-after=0) exten => _**2,2,Page(SIP/36651)|d exten => _**2,3,Hangup CLI output ******************** Connected to Asterisk SVN-branch-1.4-r57207 currently running on VoIP-PBX (pid =