similar to: How to use SIP hints and BLF for realtime extensions on Aastra phones?

Hello Asterisk community, I'm trying to use BLF with Asterisk Realtime, i've been searching for some info but nothing seems to be clear, can anyone help me eith some ideas to make this work ok? I'va my dialplan with Realtime Thanks in advance -- Saludos Danny Dias SkypeID: danny.dias1

Hi. Does anyone have a patch or workaround for the 50 BLF limit of Aastra phones? I have a couple 57i with the 560M console and only the first 50 BLF lines get registered. I am using the latest firmware from Aastra but I read that this limit was imposed because of a memory leak. Obviously my customer is complaining about these last 10 lines not showing their status. -- Telecomunicaciones

Hello all, Just wondering if anyone ever solved the Aastra 50-BLF limit when used with Asterisk (any flavour)? I know it's not strictly and Asterisk question - but I'm sure there's plenty of you out there using Aastra's on the end. Cheers, Andrew Thomas dCAP #1473

I have a 536i expansion module attached to a 57i-CT. The BLF lights on the 536i will light up and work fine for a while... however after a bit they seem to loose their ability to see if someone is on a phone. They still work to dial, if I try to dial, however, they don't light up when someone makes a call, or if their phone rings. If I reboot the phone, the lights start working again

Hello all Sorry for the repost, but I believe this is essential for Aastra phones to use directed pickup with BLF in 1.2 (and it's still experimental in 1.4 I think). pickup-mgernoth-2006-07-28.patch.txt If anyone knows otherwise than that this is still required in latest 1.2 or 1.4 please reply with success/failure stories. Any info would be appreciated. We can get directed BLF pickup

Hi, Why Aastra phones use more electricity, i.e. 48VDC whereas other phones use much less, e.g. Grandstream and Linksys both use only 5VDC. I first thought it was because of PoE, but the ones with 5VDC also run fine on PoE. What is the difference in power consumption then? -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Guys, Running Asterisk v1.4.26 (Elastix flavour) and have Aastra 9480i, 6757i, and 6730i, but none of them indicate the voic-email. Where should I look for trouble to find the root issue for MWI? Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100714/d268d1f8/attachment.htm

Hello everybody, does anybody know if BLF is correctly working in Asterisk 1.4.*? I'm particularly interested in Asterisk 1.4.25. Thanks in advance! Phil -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101029/f6bd1f95/attachment.htm

All, I have multiple Asterisk servers in various locations running various 1.4 and 1.6 versions (lab and production) and am having trouble with a new Aastra 6739i (3.0.1.2015) registering. Below is my request to support and they have looked it over and don't see anything wrong: Support, Can not get a 6739i to register with 3 different Asterisk servers with varying configurations/versions

Playing with hints/presence/BLF on asterisk I've made the following "discoveries". 1. The wiki at http://www.voip-info.org/wiki/view/Asterisk+presence says: "If you add incominglimit=1 to your peer in sip.conf, the SIP channel will notify you when that extension is busy." As "incominglimit" is obsolete you can use "call-limit".

Dear all, Recently I switched from asterisk 10 (sip) to 12 (pjsip). I converted sip.conf into pjsip.conf In sip.conf there is:subscribecontext=blf_context while in pjsip.conf i can't see that option any more. How blf is handled by pjsip? Best regards, pepesz -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I am working on asterisk 1.2.18 zaptel 1.2.17 Polycom 650 polycom 430 SIP version 2.0.3.0131 for IP 650 SIP version for IP430 2.0.3.0127 freepbx 2.2.1 I am trying to configure BLF using asterisk but failed. I would be thankfull if somebody help me. Regards FArooq ********************************************** 1 ********************************************** in my

Version - Asterisk SVN-trunk-r12793M (1.2.4) I have 4 Grandstream GXP 2000 phones configured. However at the moment, I have had to disable BLF, Hints, and Call Limiting due to an extremely annoying bug which seems to make the phones channels "lock" in busy after a call has been hungup. If I do a show hints after say extension 200 has hung up I get the following -= Registered

Hello list, Can I do something like this for BLF functionality : [test-blf] exten => _XX,hint,Macro(GetSIPaccount,${EXTEN}) exten => _XX,hint,SIP/${SIPACCOUNT} GetSIPaccount is a macro that looks at a MySQL-database for the realtime table sip_buddies where the SIPusername is taken from. It works great for internal calls... but how about BLF-functionality ?? Feedback is appreciated !

Hi all, I am working on asterisk 1.2.18 zaptel 1.2.17 Polycom 650 polycom 430 SIP version 2.0.3.0131 for IP 650 SIP version for IP430 2.0.3.0127 freepbx 2.2.1 I am trying to configure BLF using asterisk but failed. I would be thankfull if somebody help me. Regards FArooq ********************************************** 1 ********************************************** in my

I am trying to get the presence/hints/BLF working along with Realtime SIP but I never get any "busy" notification. core show hints always shows the realtime sip user as idle. I have tried setting call-limit to various values, including 1 but nothing seems to help. I have tried limitonpeers both yes and no. Anybody got any other ideas? I do know the hinting is working as I can

Does anyone have Shared (bridged) Line Appearance working in Asterisk 1.4? Specifically with the Aastra 55i. Specifically, I am using the Aastra 55i with the expansion module. We want to see if other handsets are being used. (BLF) Getting BLF to work would be a great start. It sounds like setting up the hints properly will achieve this. right? Not totally sure how this should be configured.

Hi, 2013/4/19 Olivier <oza_4h07 at yahoo.fr> > Hello, > I've just realized that several phones display both caller name and number > while ringing but when on call, caller name is not displayed anymore. > Could you recommend a sip phone that still displays caller name during > phone call ? > Regards > I've been testing Aastra 6757i SIP phone and it appears

Hello Asterisk-Community, I'm having an error with my BLF configuration on my asterisk...i've configured the sip peer like this: [8250] type=friend callerid=Extensi?n 8250 <8250> canreinvite=no context=pbx9 dtmfmode=rfc2833 host=dynamic insecure=no language=es nat=yes pickupgroup= callgroup= qualify=2000 secret=cyx2mo type=friend username=8250 subscribecontext=pbx9 call-limit=100

Hi there, I am running Asterisk 1.2. I have a Grandstream GXP2000 and Aastra 9133i with BLF/Speedial configured for other extensions. The hint's are all configured in extensions.conf and it seems to work as it is supposed to until I reload the configuration in Asterisk or reboot the server. Then neither phone displays the BLF of other extensions until I reboot the phone. It continues